Видео

and tribal seeds 🧘🏽‍♂️

that stick figure though 🧘🏽‍♂️

If you ever get stuck with no spark disconnect the yellow and black wire that's the kill wire

that is the nicest boat ramp situation I've ever seen. being inside so calm and protected. the boat ramp I use in Jacksonville Florida is in so much current. Mandeville may be kind of out there but that wonderful ramp/park, etc. sure makes up for it.

I always tie down my net while moving, but when I'm fishing, I'll store the net in one of the rod holders for quicker access...

Thats how it is !!!!!! You saved tons of money...stop being a winer

225 hp and just 50mph. 😂

Great video. Their for making this

Buddy this is all on you. Like all auctioneers THEY HAVE TO MAKE MONEY so they get 40 dollars... WOW... how terrible right?Copart is very straight up on all costs for every boat they sell including a description that says what happened. Most are weather related and most have gone under. They show detailed pictures and on that bidding page it tolls you EXACTLY what fees will be on top of the bidding. Maybe YOU should have taken the time to look closer friend and read the fee section. There is also two pages of detailed explanations on every part of this sell. The very first things they tell you below the photos is whether the storage place will charge you storage, loading fees (normally but the LOA of the boat) , storage for everything. COPART ALWAYS GIVES YOU 5 WORKING DAYS TO PAY and it never includes the day you win. They then give you at least TEN WORKING DAYS to go get it. It is on you to call the storage yard during that time to make arrangements. NO I DO NOT WORK FOR THEM. But I have bought a half a dozen plus two boats in the last few years and every single one was as described and no surprise fees. In addition, they do consignment for owners and if this is one of those, it is the seller who does fees. So it seems you are complaining because you did not pay attention to anything and now blame them? They also sell vehicles, campers, you name it.... But you have to actually look at what you are bidding on. You can even ask questions. so please, do not buy more or just read descriptions. IF a boat or vehicle is NOT AS ADVERTISED... you had the right to refuse and get your money back...

it has a choke friend. use it

lol dude, all the time u spent getting the boat in the truck, going back etc ...u coulda just finished the trip

Any boat without a title is worthless

Thanks for sharing the information. The jet ski video is different 😂

You better come back for the trailer

Having that extra help to get up on the jet ski is well worth the money! It's not easy getting on a spark without a step! At least for me being 59 years old and 200 lbs! I've done it but it wasn't something I would want video evidence of! 😂

Wood glue, non stainless screws, wtf…

That trailer was fixable and sellable$$$$$$$$

It wouldn't be an issue if people stopped buying from auctions without being able to inspect prior

Good talking points. Rather watch you talk...couldn't stomach the jetskiing footage 🤢

I wanna know where you found an ATM that'll give one's.

Need another fishing buddy? Would love to go out with you guys seem chill ASF willing to pay my way...never fished of a boat before

You still fish the lake?

You should have put two ratchet straps to the bed of the truck and hook it up to the back of the boat and bring it in

Why not jist put a new axle on the trailer....pretty cheap and pretty easy!

I was going to buy a truck for a parts truck , when I saw all their added in fees for vehicles it was crazy. Needless to say, I didn’t buy from them and cancelled my subscription that you have to buy just to bid.

Do you still have this boat?

What is the last does?

Just picked up a team baja panga if you guys would like to check out the restoration, I have some videos will be uploading weekly for daily

Thanks for the info. I was going to bid on sailboat they had, not now! I appreciate your honesty.

What brand is the 6 light LED light you recommend here in video?. Links would be great if possible. Been searching and can't find it myself.

lol been there done that with the kill switch. The coils were shot and needed to be replaced regardless.

fresh water????

Bayliner builds a 21 foot Trophy Sport Fisher .

Glad I'm not the only one that spends a ton of time on stupid projects. Check out maker pipe. Changed my life.

All these places are like a Mafia and crooks

NEVER like in never ever start an outboard motor without cooling water. It will end the life of the impeller and make it run hot in no time. Also, NEVER start a 2-stroke with starter fluid! It contains no oil at all and will cause the engine to be starved from oil which is the only lubrication it has.

ohhh nooo the skillswitch fu.. :D <3

i have the E150TRLCNM Evinrude & have rebuilt my Great Uncle's 24ft Party Barge Pontoon boat (along with the dock, dock stairs x2, pool, new roof, landscape, A/C, insulation, x2 bathroom remodels to accomodate his age) AND he turns 100 on Jan 20th 2025 and the boat is the last major project since 2016 home flood & has lived in Lafayette same house here on the Vermillion river that he bought in 1972. The stories this house can tell both unbelievable and entertaining to say the least. Anyway, for all that time and he or nobody had ever taken him up or down the river. Of course, I'm trying to accomplish this at least once if not as many as he wants, and so now you see (ok technically read & see) why the boat rebuild is so important. Plus, as a Navy Veteran it do him some good getting his sea legs! So all that brings me to this, great video comment. A bit more movement on camera than I like but finally able to verify that I'm not missing any parts after the boat had been vandalized. Now, my question is where you stopped at the fuse box wiring as I can't find where t connect the relay fuses to and the tilt trim solenoid on the setup was some connected on the backside of the fuse box. Also, which wires get the metal clip things inside the fuse box. I can't find this type of wiring diagram and see this was a custom solution probably as this is not the original motor to 3 pontoon spar pontoon boat original engine was only 90hp. Also, will this 150hp tear off this boat aluminum transom? I'm just trying to show or let him do some overdue boating, not drag racing or endangering him if the 150hp is way too much for boat model. Anyway if ur close by or want to stay in our VRBO listed space for free if you can help either show or point here, do this, now that, etc I'll do it, but this 1 & only boat rebuild is my first ever & my last ever, ever (much like the 40k gallon pool recement, replaster, repaint rebuild - why do I think I can "oh, no problem it's just concrete & paint - I can do this. Holy hell wtf was I thinking and July of last year was my had to start now or pool would have been a frog & mosquito factory producing nightmare. However, once boat is done, so is my last offered volunteered tasks that I obligated myself to pre flood status. Carried home & flood insurance since 1972 & before repair claim paid - insurance co claimed bankruptcy. So all of the repairs have been VRBO customer bookings & myself and he doesn't own his house reverse mortgage it before the flood. Then 2020 hurricane did a bunch of damage as well. Again mandatory insurance required to live here & insurance co did same thing, oops we bankrupt again... Super BS way to honor our veterans... It's even crazier as the free room & board maid/for VRBO job steals 50k of nickel plated parts due to his memory not being as sharp as it once was. Anyway, sorry for all the back story. After the phone call task by my Father to come help his Uncle I just obeyed.

lol that’s awesome

$10 lights? What lights did you get and where? Link?

Definitely going to put a little ruler on the side of the boat I'm going to go to Tractor Supply get those rubber mats they fit together like a puzzle

This is a joke video right?

Does copart sell vests or do you need to bring your own?

No trailer lights, no license plate, bad bearings. Thats all on the buyer. Bring magnetic lights, dont leave until the trailer is road worthy. Go to the dmv and get a temporary license plate for transportation. All i do is bring magnetic lights, old license plate and spare tires. Guys whining when its all on him lmao.

I mean I wouldn’t be surprised leaving a boat at an auction house for 30 days cost you that much. Hope it’s a nice boat.

If you dropped 2 inches in pitch on the 4 blade you would get good hole shot……but your top end is going to suffer. Putting more ears in the water is never the answer for anything but a barge.

Use misquote spray

How long did it last

Dude, you are the tool .

Four gives you more control and hole torque,, three gives you more top end speed and higher rpm’s. Without breaking down the pitches and variables that entails. But the three blade will give you more top end speed. Enjoy your testing.