Видео

Thank you, it was gusting around 30 mph so the Air3 gimbal did a great job and I tried to keep below the shelter belt tree line . It meant I couldn’t get the high up panoramic shots I usually like to finish with . Thanks for commenting. 😊👍

@@ANDYOLDRIDGEFARMINGVIDEOS I’m After the air 3 s. I’m using fpv and the good old M2p atm Oh and the mini. Keep up the good work!

Thanks it certainly is 😊👍

Ok 👌

Probably with just a different screen put in place. youtube.com/@andyoldridgefarmingvideos?si=h0kE53RtPZAzjpB0

Hi, this was filmed in East Yorkshire, England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 If you like seeing films from this part of the world then please check out my RUclips channel on the link below. youtube.com/@andyoldridgefarmingvideos?si=a95mhrTaNdRfHJ-n

@@ANDYOLDRIDGEFARMINGVIDEOS it looks like a rather large estate I used to work on in the 80’s near Nunburnholme and Huggate.

Not too far away Low Mowthorpe 🚜😊

@@ANDYOLDRIDGEFARMINGVIDEOS I was on War**r Estates unit 1 at that time. We had 6 x MF1200 which were replaced by JD4240 4wd and a mix of NH8080/1550S and MF760 combines and JD2140 tractors,back in the day. It’s amazing to see the capacities of the new machines, one/two combines can do the work of six!

I thought you must be referring to Warter Estates. It still amazes me how far combine out puts have come, when you stand and watch this monster complete a rounder there and back and you see 100 feet of cut stubble it is just an amazing sight 😊

😊👍 youtube.com/@andyoldridgefarmingvideos?si=ynaYD0m0A6DZeRJ9

I think it’s that length to make the most of “controlled traffic”options on different farms and drill widths. But I know what you mean it will be heavy, but also it has a clever feature where it can turn off one or both tank augers when a trailer is nearly full so the unloading auger is empty of grain when closing and opening. Thanks for commenting and watching my videos 😊👍🚜

I can’t remember to be honest 🤦‍♂️

Apparently they are but Case won’t be selling the AF in the UK. Thanks for commenting 😊 youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

Thanks for watching and if you’d subscribe to my channel it really helps it to grow. Thanks youtube.com/@andyoldridgefarmingvideos?si=dF9f6HKRTt9G8Jq-

Thanks for commenting Robert, hopefully you will like my other videos showing how combines have got bigger over the years if you’ve subscribed to my channel on the link below. Thanks again youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

Hi mate it’s a collaboration and new Holland provided the paint 😄 youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

Not sure what you mean but see how I use music on some of my videos and not others by using the link below.👍 youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

@@ANDYOLDRIDGEFARMINGVIDEOS My mean, 1/2 your video is not music.

Some people really like to hear the engine and machinery noises so I often edit music into part of my videos and keep some engine noise where it is clean and loud but when I was filming the CR11 the wind was really gusting loudly and was louder than the combine so I had to try and lower the wind noise with my editing tools .👍

@@ANDYOLDRIDGEFARMINGVIDEOS yes

Cheeky😄 youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

It’s definitely only a machine for the big boys and if you like £1M combines click on the link below. youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

🤣🤣🤣🚜👍

Why not go to 100 instead of 80

Hi Will That tank holds 20,000 litres which works out at about 16 tonnes so it really needs the tracks to spread that weight 👍

@@ANDYOLDRIDGEFARMINGVIDEOS what about triples

In the UK we’ve no gateways big enough 🤣🤣🚜🚜👍

@@ANDYOLDRIDGEFARMINGVIDEOS we have sidewalks here in the U.S.A.😁

Thanks for your kind words, it was great to be invited to another big combine demo day, it really did make a big impact. 😊🚜👍 If you want to see the early UK launches of the Claas 8900 & the John Deere X9 click on the link below to my channel. Thanks again Andy youtube.com/@andyoldridgefarmingvideos?si=ocr6atcXf85HW7a_

Thanks for commenting 😊🤣 youtube.com/@andyoldridgefarmingvideos?si=HOWK_6Bgdyb6Vl2F

Hi Nick Never say never, apparently they’ve developed a 61 footer already 😳 www.youtube.com/@ANDYOLDRIDGEFARMINGVIDEOS

With Alot of threshing capacity 😊👍 youtube.com/@andyoldridgefarmingvideos?si=HOWK_6Bgdyb6Vl2F

Hi Charles That’s a good point , it’s all getting really techy for the bigger estates who can really get the best out of all this modern kit giving other benefits like controlled traffic working perfectly 😊🚜👍. youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

It would be a good competition, I’ve been lucky enough to film the big three, the 8900, X9 and CR11 and they’ve all been mind blowing. I think if the CR11 gets the right conditions it could smash the old CR10.90 world record. Have a look at my other videos of the big 3 combines with the link to my RUclips channel below. youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

@@ANDYOLDRIDGEFARMINGVIDEOS the X9 needs more engine power . I'm operating one.

The rotor length and cleaning would make it smash. 10000bu an hr clean grain return elevator

Thanks for commenting, see these other beasts. youtube.com/@andyoldridgefarmingvideos?si=-S00-ZvWegZuLgXR

Hi Michael It will slow him down a bit compared to his usual swaths 🤣🤣 youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

It certainly was 😊👍 youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

Hi It absolutely does when it’s comes to efficiency in potatoes. Thanks for commenting and watching my videos. youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

Good point, well made. The day after New Holland broke the world harvesting record in 2014 the design team got together with a blank sheet of paper and set about designing something completely new to beat the CR10.90’s capability. Mind blowing dedication really. youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

Thank you very much 🚜😊👍 youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

Several different drivers just having a go and no gps probably as they were just setting up for the day after when the demo was held proper. youtube.com/@andyoldridgefarmingvideos?si=FyzzWT5lvJJ-Pfjo

Thanks guys pleased you like my video and thanks for subscribing to all who have 😊🚜👍 youtube.com/@andyoldridgefarmingvideos?si=dF9f6HKRTt9G8Jq-

Then don’t cut rice.

No I wouldn’t want to either, but luckily this combine can reverse the rotors, feeder house and header by rocking back and forth until clear , which is pretty handy 👏👏

I am glad to hear that boss how these beasts have evolved from the ransome combine I started with 😎

Top logic Bruce Thanks for commenting 😊👍 youtube.com/@andyoldridgefarmingvideos?si=HOWK_6Bgdyb6Vl2F

That will be something to see 😳👍

Thank you for commenting, I remember thinking our 12 foot cut on a 4 year old NH 1530 was a bit big compared to all the 10 foots kicking about and quite impressive 🤦‍♂️🤦‍♂️

It look wrong but it’s actually completely fine and designed to sit like that when not on the ground working and flexed the other way .

Just setting up day. youtube.com/@andyoldridgefarmingvideos?si=HOWK_6Bgdyb6Vl2F

There are plenty around.

Maybe so 🚜🚜

You can make anything last as long as you want

​@@cidertom5140 not really lol

Thats not your combine then😂😂😂😂

Hi Simon For more "ear tickling" for you to compare try clicking the link below. www.youtube.com/@ANDYOLDRIDGEFARMINGVIDEOS

Thanks Andy For more of the worlds biggest combines and other more modest farm machinery in action click the link below, thank you for viewing and hopefully subscribing. www.youtube.com/@ANDYOLDRIDGEFARMINGVIDEOS

Hi Rick, I asked the same question and apparently it is because it is heavily spring loaded in sections and the jockey wheels that you see running along under the length of the header only need a bit of pressure for the header to lift in the section and allow it to hug the contours of the field. To be fare that is exactly what it did really well while I was filming it. Thanks for watching and hopefully subscribing for many more videos to come.

@@ANDYOLDRIDGEFARMINGVIDEOS Yes, that does make sense.

Thanks Darren, I thought you'd like this video.

Hi , Apparently if they decide to go for another world record it has to be with only 1% of losses so I would imagine that is exactly what this machine can do in good going. Thanks for watching and hopefully subscribing to my RUclips channel.www.youtube.com/@ANDYOLDRIDGEFARMINGVIDEOS

Indeed!

Lots of 💰

And that’s just for the header

850,000 to 895,000 excluding header. 120k-150k for header.

I remember filming my first 30 foot header thinking it was massive and surely they can’t get much bigger than that, how wrong 😄😄

I think we're at the peak now. 50ft UK and Europe and 61ft rest of world.

I feel the UK is at its peak of 50ft. Rest of the world 61ft. If they were to get any bigger, i think 65ft would be the limit of realistic.

Yes it maybe does 👌

Hi James, to be fair there were 3 or 4 guys jumping on the combine who we’re unfamiliar to the machine and doing a rounder or two, the experienced demo driver was right on the money 👍

Very true 👍

If you mean

@joescheller6680 incredible machine youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

@joescheller6680 youtube.com/@andyoldridgefarmingvideos?si=JhefGpg14WH05F9B

Hi , just for context I was told the CR11 was only using 60 litres per hour and the two other estates combines were using roughly 100 litres per hour , so it seems pretty economical which as a fuel salesman is the last thing I want to hear 🤦‍♂️🤦‍♂️🤷‍♂️🤷‍♂️ But yes you are right it is a very nice combine even if it is trying to put out of a job 🤣🤣

Same could be said of an Ideal 10T or a JD X9...... but unless you have had any of them side by side in the field how could you know ??

No way. CR11 well ahead now. Spot output of 150t/hr. JD X9 and Lexion 8900 little over 100t/hr. Ideal 10T not even in the game.

@@jonnykerley unless you have driven them all in the same field side by side in the same crop then that is just pure speculation. The 10T and Claas could do well over 100t per hour but throw a load over the back. It is the combination of sample/losses/fuel and output that count. The Ideal is actually incredibly efficient in that regards as are most when driven to the crop/conditions. Playing top trumps like a little kid banding whose got the biggest..... etc when you have not driven all this kit together renders your argument pointless

@@tommyzoo Simply not true. Yes, in the same field would be the ultimate comparison, but the CR11 has done 137t/hr in wheat and no other combine has. Period. Simple. It might have been in perfect conditions, but all the other machines have run in perfect conditions at some point. And just to be clear we are talking grain throughput not straw and grain combined. Then factor in the CR11 did it with an average loss rate of LESS THAN 0.1%, that is even more impressive. You said yourself the others could do 100t/hr but throw a load over the back- thats the whole point of the CR11 and one of the key metrics it was designed to do- those throughputs with next to no losses. You probably want to do a bit more research. The CR10.90 set the world record for harvesting in wheat 10 years ago and no other manufacturer has beaten it. The CR11 is 25% more capacity than the CR10.90. As for little kids, you started the top trumps- I was just updating your out of date information😆. Ps How many combines have you driven?