Видео

Thanks for the video, getting mine delivered soon here in Sweden and the stock Acropovic both sounded bad and looked bad. This is what I would like to add to mine.

Hello - I got that far, but the device does nothing when I press and the error remains - what could that be? Image drum error - thanks

Hi have you got any steps how to replace the backup battery for date and time on Xpress C460FW?

Good vid !

i would want one but that has better quality (i got a a6 2014) i can see some pixels and i want a hd quality do u know of any compatible recomendations?

Super video and thanks for sharing. Got to the point where i was going to need to go and buy a wet vac but substituted my vax carpet cleaner with attachment hose. This worked a treat and pulled about 2 spoons of rice throught the waste pipe. Brilliant idea and thanks - wife thinks I'm a ninja!

Kelpi produce such a great sound. Aussie 🇦🇺💪

Sounds good!

It’s an A7?

Sweet, looks and sounds cool.

Thank you!!!!!!!!!!!!

Nice exhaust sound! It's very comfortable! Let's go for a ride on the bike!

So helpful, thank you so much

Don’t work with XPRESS C480W🤔 Does not respond to key combinations😕

En svensk med ett kelpie rör! Fan va fränt!! Hur mycket kostade det att få det skickat hit? Är så inni helvete sugen på en xsr900 efter jag provkörde en.

Is it possibl to install a original audi backup camera to my C7? It was born without the backup camera

does the CPU need to be remapped after this install or can u use it without tuning? ty

Kelpi vs Dominator gp3, vilken skulle du säga låter finast på xsr900? Tack på förhand

I also had a problem with error 1, but the whole problem was in the closed switch of the upper cover of the sensor. after I left the cover screws a little loose, the problem was solved.

how did you connect it? Where is it connected to?

ingenious! thank you

Thank's a lot from France !

I didn't know these CarPlay units had a Mic Input Jack....

Thank you. Your video was the exact problem I had with my SaniCompact toilet. You saved me hundreds of dollars on a plumber. Thank you for posting this. Also discovered there is toilet paper specifically for this type of toilet to avoid this kind of clog ever happening again.

Terrible, ineffective design by Bosch. I can't tell you how many times I've had to unclog the impeller.

Use a steamer to clean the hoses.

Do you know, if there is any check valve between drain and drain pump hole? Drain on my dishwasher seems blocked, I tried with air compressor, to blow out any crap towards the pump. But is seems very blocked, not even a little bit of bubbling. So either very filled with garbage, just like yours, or some check valve, somewhere?

not for the layman

Hi need help with my printer. i received it a couple years ago. and recently started using it. the display screen is off and i can see whats on the screen if i shove my face to it. is tehre a way i can switch it on? i been trying but i cant really find anything on the internet and came across your video. Thank you for your time

thank you for the video. in my case I've removed some dust and hair from the motor (as per the advise below), tested on 9v battery (even though it gave some real smoke initially...). Applied some silicone to the motor and moving part of laser, and to rubber ring. Disconnected motor and used wd 40 on contacts (as per the advise below:)). and now it is working again. will see how long it will last:). if it breaks again probably will replace the motor. update: next day got the same error. ordered a new motor on Ali express

Worked after several attempts but i had to do the restart manually, by pulling the cord, for the error message to go away. Just in case someone has the same problem. Thanks for the great video.

I used to like Samsung and have had the C1810W printer a long time. But have always had problems with it. The display is nearly impossible to read most of the time, it can't seem to stay connect to the Wi-Fi making me redownload it every month or so which takes hours because even using the Ethernet cord the PC can't seem to find it to reconnect the Wi-Fi. The controls are similar to yours but the upper button won 't bring up the menu. I usually use the PC menus since the controls are such a pain. I thought a hard reset would help but it won't let me do it. It insists I reset the time each time it's unplugged which is often because it starts up in the middle of the night waking up the whole house.

The best video🎉

Thanks for your video, i have followed your instructions plus i cleaned the contacts with kontakt spray to be sure the connection between the motor part and the robot will work properly, the rest of the work i followed your whole plan, and to be sure after all i pressed reset, after all this actions it works nice, so great Thanks for your very good video and instructions

Hej jag ska göra detta har fått stopp själv. Hur lång tid tog detta ungefär?

Thanks a lot. Worked for Imagery Unit message.

Thank you ! 🎉

Update from SF, California/USA: Tackled this morning in about two hours, following your video exactly. My Boshe model is different from your model but it’s the same concept. Found two pieces of broken china in the plastic drain mechanism. Works perfectly. The hardest part was pulling out the machine because my hardwood floor had a lip under there for some reason! Thank you X 1,000! I didn’t have the $1,500 for a new Bosch dishwasher from Lowe’s ($1,200 + $250 to install, + $ 50 to take away broken machine.)….I’m very happy and appreciate your video, showing that women can do it! ❤❤❤❤❤❤❤❤

All he needed to do from the very first day of ownership, buy a grill cover that is designed for that pit!

Thank you from SF! My husband passed away and I gotta fix everything myself. I am pretty good at fixing most things but this one is a doozy! I hate being without a dishwasher. I almost just ordered a new one for $1,000. I fiddled and fiddled to get rid of the E-24….Your video was AMAZING! Thank you from the States. 💋 We’ll see if it stays fixed.

Looks great! Happy grilling!

Hello. The old engine has 12 teeth, the new one has 13 teeth. ?

Great video!Do you know where can i get the rocker on/off double switch?

Hello.. In the Bosch PSR 14.4 li 2 model, there is no BMS 4S card in the battery box. How does charging work?...(merhaba.. bosch psr 14.4 li 2 modelinde pillerin kutusunda BMS 4S kartı yoktur. Şarj nasıl oluyor..)

no seven screw..Eight screw

Perfect, this worked! Now I wonder if just disconnecting the LIDAR assembly and then reconnecting it would have helped equally as much. Not sure why would applying 5V to the motor help. If mine throws the error again, I'll test it out.

Hi everybody, despite tenth of attempts, I cannot enter the quoted Tech Menu following the steps clearly described above : Menu, Down, Left, Right, Ok, Stop/Clear, Ok, Menu, taking into account the fact that keyrs must be pressed without delay. My printer is a second hand one. Could I imagine this setup process could have been modified by previous user ?

So mine shows there is contact, yet still it shows this error. Any idea What it could be?

Hey, can you please send me the picture where it shows, how to do the power connection with the backwards driving lamps? That would be very much appreciated!! My aftermarket cam came with a filter, which I am supposed to connect into the powerline and then I need to connect the red cable to the original Audi-cable which activates the backward driving lamp. The black I hope I can simply connect to the metal of the trunk, since it´s supposed to be ground, right? Cheers for any help!!

Precis fått detta fel på min Q-Revo idag. Så sjukt tragiskt jag älskar verkligen den här lilla maskinen.