- Видео 6
- Просмотров 25 264
ECUHero
Добавлен 25 авг 2023
How to Virginize a GPEC3 Chrysler Jeep Dodge ECU
In this video we reveal our latest BETA feature. The ability to prepare used GPEC2 GPEC2A and GPEC3 ECUs to be programmed using Witech 2.0 software. Under normal circumstances Some of these ECUs cannot be programmed utilizing the Factory Software. With our process we restore these ECUs to a non-programmed state. This allows for Factory Software to be utilized in linking the IMMO System.
This function is to be used when the original module is not available. If original module is available refer to our cloning videos for a walkthrough.
ecuhero.com/product/ecu-hero/
This function is to be used when the original module is not available. If original module is available refer to our cloning videos for a walkthrough.
ecuhero.com/product/ecu-hero/
Просмотров: 4 118
Видео
How to clone a GPEC3 using ECUHero
Просмотров 1,1 тыс.Год назад
In this video we demonstrate how quick and easy it is to clone the GPEC3 ECU. ECUHero clones the GPEC3 via OBD or Bench without the need to remove the rear cover. Not only is it quick and easy but ECUHero will not leave you with calibration related codes related with using other methods.
How to Clone a GPEC2A with ECUHero
Просмотров 3,5 тыс.Год назад
In this video we use ECUHero to Clone a GPEC2A and briefly explain base model part numbers vs current calibrations.
Bench Flashing Basics
Просмотров 12 тыс.Год назад
Hello heroes, in this video we cover bench flashing connection methods, bench power supplies, breakout boxes and terminating resistors. While bench flashing may provide a stable method of module flashing it also comes with its own set of challenges. That is why we felt compelled to share this video with the industry to help further the growth of technicians like yourself.
ECUHero Latest Release v1.10 Demo
Просмотров 2,4 тыс.Год назад
In this video we use ECUHero to clone a GPEC3 using the latest version of ECUHero. The device used for the demonstration is an OBDX Pro FT but the GT will work as well. If you are interested in software to clone and program Chrysler, Dodge, Jeep, Ram, and Fiat ECU, ECM, and PCMs then go to ECUHero.com and become a HERO today!
ECUHero Demonstration - GPEC3 Cloning and Configuration Programming
Просмотров 2,6 тыс.Год назад
This is a demonstration of ECUHero showing how to program a GPEC3 ECU including cloning the EEPROM and flashing the main operating system/calibrations. This software is currently suitable for programming NGC4, NGC4A, GPEC, GPEC2, GPEC2A, GPEC3, GPEC4 and GPEC4LM. Checkout our other videos for demonstrations on these ECU types. Do note ECUHero is a token based application where each ECU must be ...
Good morning @ecuhero, hope you good. Wanted to know if you do offer online training
Will your software recover gpec2 ecus? Had a guy flash his pcm with hp tuners and corrupt the OS, I am able to pull the Eeprom but the flash side is corrupt,
What was the model of that 3 box with switches you said was your go to???
@@EZ-PZ-ECM the Chiptuningshop cable but we now offer one on our website I prefer as it is more durable
do keys have to be programmed afterwards ?
Why didnt you show us how to download it from tech authority?
@@cogunlover5550 only needed if we do not have a virtual read available
Also where do I get ecu hero from?
@@cogunlover5550 ECUHero.com
Do you download the files or are they loaded into the software?
@@cogunlover5550 we have virtual reads available in the application
hi there, very interesting, how do I identify what ecus that I have to buy the adaptor cables in Australia? Also I have just bought a dc706 OBDstar and just learning, I hope that it will do the job for Australian vehicles
Could this be use to unlock for HPT?
Is there patches files on here let’s you unlock pcm gpec to be able to flash from HpT ?
What is the name of this software
@@carsprogrammer5597 ECUHero
Fantastic! Got mine up and running and cloned a GPEC2A in no time! Looking forward to see what other modules and functions you guys will come up with next. (HPTuners unlock would be amazing by the way)
Can it turn immobilizer off to use as a plug and play on a different vehicle after vin change?
donde compro el sacantool para usar el software
Can you do a skim delete on a 2003 Jeep liberty with this
@@larryandbelindaflowers4828 that module is to old for us to cover
does it work with other passthru's? autel's?
@@estebanbogarin4616 we only support the OBDX line of tools which we sell on our website.
Working for 8GMK?
@@kirchann We have a few but not a vehicle to test on yet.
After i copy my pcm to my laptop do i have to take it out and then put the used pcm in my car to copy my original pcm to the used pcm ?
@@pimpjuicedp yes or you can do it with our universal bench harness outside the vehicle on the bench.
Diagram imobilizer
Thank you. Amazingly well explained.
What’s the name of the program you use for that procedure ?
What happens if I only change the information of the epromm? Is it blocked? Or could it work normally as long as the calibration of the flash is for the same?
@@rocktamayo9891 eeprom holds all the security information. So it should crank and run. However you need to make sure the proper calibration is installed
Will you show how to unlock the security to work on HP TUNERS
Some kindly feedback...if you lose the radio/music playing, and slowed down the narrative and visuals, you could have a much better demo. Thanks
I place my order as well and have great expectations about the capabilities of this software
are updates free
Yes updates are always free
do u need to pay for software or just for token
Just for tokens
HELLO AWESOME VIDEO ARE YOU ABLE TO VIRGINIZE A GM E92 OR E41 ECM?
Everything is good, but you just need to add the option to unlock the security for it to work on HP tuners😊
Do you have a video for getting around secure gate way beside bypass connectors?
Autoauth
Hello, I have a question. Please, is reading and writing done without having to open the unit at all?
No opening of the ECU is needed with ECUHero
I did connect my godiag properly to try to read / test my me9.7 ecu on bench mode but it doesnt read it , my main purpose was to try and activate the teach in drive authorization on bench mode but no success, i use the launch padvii, please help me out
hi,does it works whith any other j2534 like snop on or drewtech?
On your site you mentionig j2534 he work with it?
We only support the OBDX Pro line of tools which can be purchased with our software at ECUHero.com
What years of pcms does this support? Someone’s telling me 2020 and newer this won’t work on?
The GPEC2a is still being used in current production vehicles. So up to 2024 depending on the vehicle.
How can I get software?
Ecuhero.com
can you point me to resources that will help me identify software/hardware to full feature reprogram/flash of ECU's for Dodge/Chrysler/Jeep? I have appcar diag right now and it doesn't do flashes, just simple routines. I am looking to step up and do full programming and could use some help on what to buy to start out doing this.
Yes check out our software and tool at EcuHero.com
I ment to finish i would like to get inti ecu flashing eventually😊
Its easy with ECUHero!
Dear sir,im stephen from the uk. I really enjoyed this intriduction to ecu flashing eventually. ,just for your infirmation sir, The brown wires labelled negitave or earth,are the BOSCH WIRING SYSTEM DEVELLOPED IN GERMANY. IN EUROPE ,ALL CAR MANUFACTURES ADOPTED THE BOSCH WIRING SYSTEM,BACK OVER A NUMBER OF YEARS AGO, THEIR NEGITAVES ARE BROWN AND THEIR LIVES ARE BLACK.... BEFORE THAT WE USED THE LUCAS WIRING STANDARD ,WHICH WAS RED FOR LIVE BLACK FOR NEGITAVE , AND AS THE BOSCH WIRING STANDARD HAS BECOME THE GOTO STANDARD FOR CAR WIRING IN EUROPE,, Thats why the GT100+ is wired to the BOSCH standard,as 1000s of these units are bought in europe😊😊
Thank you for that info I had no idea
VERY usefull feature, cant wait for cummins support and other dodge product stuff.
@@CIRC1977 slowly but surely we will get to Cummins
@@ECUHerodoes virginizing an ECU clear permanent codes also? Or they stay with the ECU after virginizing
You are presenting GPEC3, is the same procedure for GPEC2 and GPEC2a, is GPEC2 and GPEC2a already supported?
Yes, the procedure will be the same.
But you need auth code for ecu programming
Yes you will need a pin code for programming after using ECUHero this is only for when the original ECU is not available for cloning
Hello, I have a question, if I have the base part number of a PCM, can I use any part number that appears under the base? Or can I just use the base part number? An example is that I have a PCM 04671405AK and the base part number is 05017958AC and searching I have the next part number in the same cell as the base number 04671637AA.
Does it support drewtech cardaq plus 3?
To provide the most reliable results we only support the OBDX Pro line of tools like the FT, GT and the VX
what is the price of this calculator?
Hello the tool is $140 and tokens are $25 a peice to peform this function you will need 1 token
@@ECUHerohow can get this software?
What tools does it use. Nexiq or can i use my dealership connector. Will i be able to flash a cummins cm2450?
We use the OBDX Pro FT it is available on our website. We actually will be adding support for the cm2450 dodge controller in the next few weeks if all goes according to plan.
When the new updates available
Went
It is now available!
Great info, Thanks for sharing!
'PromoSM'