Видео

Thanks so much for Commenting & For Watching! Much Appreciated 😊

My Pleasure, Thanks Again for Watching! 😊

Basically, but different surfaces will absorb more than others. Porous woods soak up more & also leach out more. As long as you let it soak in keep it wet and wipe off so it doesn’t remain tacky, it will be fine. I’ve never found the need for more than 2 coats. 😊

@@DIYFotoWorks I did this on a work bench I just made. I used a butcher block from lowes as the table top. Very hard wood. I followed the directions to a t. For some reason, I got a bunch of white spotting on the top of the finish. No idea why. We used the finish on the entire table, and the 2x4 and plywood for the bottom shelf were fine. Just the butcher block was spotty. I'm going to leave it since it's just a work bench. Was curious if you ever experienced this. Thanks for the response!

@@nickp3173 No I Haven't. I've used Danish Oil on dozens of projects including my own workbench, solid Oak top. My WorkBench was the only time I had an issue. It Took along time to leach out the finish. I had to rewipe for days until it finally stopped. Very Porous wood, but no white spots. Sorry, I can't imagine what that could be, maybe someone more knowledgeable will chime in.

You are Welcome! Thanks for Watching & Subscribing. 😊

Thanks so much ZC & Thanks for Watching! 😊

Thank you & Thanks for Watching 😊

Thank you, Getting there. 😊 Thanks for Watching!

I do, but because their are so many different clamps out there I kept it simple. Basically the large bottom clamps are spaced 2 1/2 on centre. The smaller top clamps 1 1/2 o.c. For the slot width I added 1/16” or hair larger. I don’t think it requires perfect precision. But they will sit better if not to sloppy a fit. Hope this Helps!

Thank you, appreciate the Comment! 😊

I’ve only made this for general use while drilling freehand, it is tricky with smaller bits. I use my small drill press with a Honemade Fence etc. frequently, whenever I can. Thanks for Watching!

@@DIYFotoWorks Thank you.

Thank you 😊

Thank You! I believe it was roughly $100 for the pressure treated wood. It was still post Covid Pricey. A bit less now here in (Canada) Plus your pots of course. I had the exterior stain already. Hope this helps. Thanks for Watching!

Thank You 😊

Thank you, I know! 😊

Thank you & Thanks for Letting Me Know, Appreciate It! Link Fixed. 🙂

THANKS FOR WATCHING!!!!!!!!!!

Thank you, Canon R5 with a 100-400mm Lens 😊

Thanks so Much, appreciate the comment. It was Exterior Black Paint & Primer (Behr) 🙂

2 5/8”

Thank you, it looks great

I’ve considered something similar, sounds Great! 😊

Yes, it will, you could apply a clear coat for more protection however.

Easy build adjustment 😊

@@DIYFotoWorks Yep, just a lot more wood. But gosh I love the look of it. Mine is a decorative vegetable garden so appearance is key. That or I could stop using tomatoes that go 8-10'. 😂

You’re more than welcome, Thanks for Watching! 😊

Thank you, Good Luck & Thanks for Watching 😊

Thank you 😊

My Pleasure, Thanks for Watching 😊

I use a fair bit of water based finishes when I can, soap & water and a brush comb, I do it right away after I finishing filming. For Danish Oils if I use a brush I will throw it out, I use cheap ones in this case, but like foam brushes. I rarely clean with solvents etc.

Thank you 😊

Thanks! 😊 & Thanks for Watching.

Still love it I have an updated video on my saw Why I still Love my Dewalt Jobsite Saw 4K ruclips.net/video/ZkqeV24ELAw/видео.html Thanks for Watching!

Perhaps, that’s one way. It really comes down to how precise you find useful. Many ways

Thank you, appreciate it 😊

Thanks & Thanks for Watching!

Thanks, Sedum only for video filled with wispy grasses now. 😊

Yes, likely older videos

Thanks so much 😊 I really appreciate it.

You’re welcome, Thanks for Watching. 😊

Totally agree, can’t ever see replacing it! 🤞 😊

OK

Thank you 😊

Thanks so much from Indonesia! & Thanks for Watching. 😊

You're welcome

Thanks a lot, appreciate it. 😊

Thanks you! Thanks for Watching. 😊

Very kind of you, you’re welcome. 😊

Thanks, they absolutely do, it’s quickly melting however. Unfortunate for them good for me. 😃

You’re welcome, Thanks for Watching!

That’s Great You’re welcome, dog crate sounds great I’ve considered making something similar for my own guys. Thanks for Watching! 😊

The metal dot is actually a threaded rod leftover in the Oak. It was a large outdoor patio table at onetime commercially made. Thanks for Watching. 😊

You’re so right! 😊 Thanks for Watching.

Just a regular winter day in Canada 😊 Thanks for Watching!