Видео

Tbh I’m used to hearing printers bc my first one (I know it’s tiny but) was a WIIBUILDER, and it doesn’t have anything to silence it so I’ve fell asleep to it with not much trouble lol

My old cr10 broke and I’m trying to find a printer for around 350$ would you recommend the Neptune 4 plus???

4 slot for mine was throwing my spool off. But adapter helped. It still goes loose though

When my Bambu labs x1-c ran out its filament just purged all of it immediately, just like the one you showed, before it moved to the other roll that was the same exact brand and color. Is there a reason mine does that? Can change a setting or something?

I just started doing some pteg and turning the heater up a little higher and the place under the heater has started to form a circle divit.

I'm brand new to 3D printing. The 5M is my 2nd machine since Nov 2024. Print nozzles clog after 5 prints and WILL NOT unclog. I give up.

Did the enclosure help with prints? Got mine for Xmas and have had the hardest time getting good prints consistently. It’s mainly with setting the right nozzle temp especially with different material. Get a lot of stringy prints or build up on the nozzle. Any suggestions?

I got a 5M in the Black Friday sales. It had about 5 great prints... Then on the next print, the bed levelling failed and the nozzle gouged the bed and snapped off. I returned it and got a Bambu A1 instead.

I have had two of these ooze out though out the nozzle and ceramic surround. think I will go back to the stock one.

How did you fix it it’s the same problem with mine

Hey man! I'm looking at your X-axis linear rail mod. Mind sharing where to find the parts and how... Love your stuff, man! Keep it coming 👍

This printer is actually good for the price, not sure if you're just milking views or what.

Did u say the secret souce 😂

All your children, and you know each one has their good days and bad, and some throw total fits of rage while others nearby snicker and say "Look what I can do" while they're spitting out full plates of spaghetti, meatballs included! Ahh, the smell of PLA and ABS mingling with a slight hint of something burning on a nozzle that isn't cleaned. Yep, that's the world of 3D Printing! Now I have to go because I heard a little song in the other room and a beep as well. It's like Christmas all over again. 😂

Atleast the ace is drying

Know the x axis. For even better prints

Thank you for this info!

Legit just spent the last 4 days levelling my 4 max. Never again. Finally got it working after a 5 hour call with someone on the Elegoo discord. I knew going in this was not a beginner friendly printer, and have been using 3d printers for a while. But it should not be this difficult to level a bed and get a print going

I use the ender 3 v3 se. Its like the A1 and elegoo neptune 4 pro mixed together. Really nice prints.

Can you send me your tuned settings?

What printer is that

You should have tested both printers on the same filaments, otherwise the comparison is usseless.

LOVE my T1. I print PETG at 500mm/s and it prints wonderfully. Best printer I’ve ever owned. The fan is not as loud as many make it out to be. I have it in the same room as our TV and we can watch TV without it bothering us.

I love my Ke. ❤ Faster and great quality for a good price. I do want to go to the next level with printers just have to save. Thinking bamboo, Creality, or flash forge

Get the lock models for the ams or just not place them ontop. never trusted that setup

my neptune 4 plus's y axis is way too far back and all the prints are shifeted back a bunch of inches

Love that stuff. Bed weld works great but this stuff works better, and isn’t that much more expensive. This stuff works for PC if your bed doesn’t get hot enough. I can print PC on a 100° bed with this stuff!

Is there a printable purge basket for it?

I just got a Neptune 4 plus. Me and my dad finished the assembly recently. I know I have to do firmware and tuning and stuff next but what are some issues to avoid as you have a year of experience with this printer?

Dont you need a 60w heating element for this rather than the stock 40w? Delivered to the nozzle

I have got a problem, on all prints exept benchy the prints come of the bed, i put on glue, i have also cleaned it, but the first layer is just bad

Brother ,my m5c s extruder plastic gear broke after 1 week, is it available as a single part or do I have to by whole hot end ?

How do I replace the filament on it tho? I’m trying to print something with a different color and I just got my printer yesterday so I don’t know how it works

Doesn’t mean it’s not a good printer

Is the T1 good?

Did you ever find out how to fix the benchy? My ankermake is having the exact same type of print quality with a benchy

Will you be getting the Qidi plus 4? Would love to hear your thoughts on it.

You can put the speed on it to 500%

the nozzle on the ender 5 s1 is longer then the other ones