Видео

Rich, just wanted to thank you! We purchased a 2024 32rls and after watching this video I checked the fan and sure enough no sleeve. Contacted Alliance and Stephanie send it right out. All good now.. thanks again!

How’s about a close-up showing the thermostat before you do anything? Want to know how to remove the cover.

Thanks Rich, those do look great for back packing. I make the egg carton ones for our fireplace with reject candles and dryer lint. They work well too. Any chance you and Becky will be at the Oregon Alliance Rally in a couple of weeks?

Hey, I saw those get installed!!! Great video, love the way the legs adjust, winner!! We had to paint our factory stairs too, they had rust in the same spots. Thanks for sharing.

Nice Video. Was on the fence with this, but yours and another video has convinced me. I was looking at one that swivels. I see that you got the telescoping A-Frame ladder. What do you think? Does it store ok? So many things on a RV that requires a ladder.

Nice video and product, will look forward to this someday....

I have one and I love it! The strap should be mounted so that the screw is just outside of the ladder frame on the lower end at least so that when the tailgate is up, the ladder can't sag from it's own weight and truck movements. Next, you need the tailgate shock. Another thing that I thought I would never need.

Great video

I never thought I wanted a grandpa step on my truck. Until the one truck came with it in the tailgate. I'll never have a truck without a built in "pappy" step again :) Nice video buddy

Thanks for the review, very thorough. Did you end up using the antenna extension wire? How long is your rig?

Good information, presented well! Did Becky get hazard pay for hanging on the ladder?

Thanks for posting Rich. It looks great and a number of good tips from C2RV during the install.

Needed this info. Thanks

No way would I ever buy an alliance that’s all I see is poor quality control and poor craftsmanship from alliance

I camped in Blue Knob State Park. The Kadydids and Racoons kept me awake as I was in a tent.

Looks great what size of stove is it

Great job Lynn and Kimberly. Thanks for filming this Rich.

Just think. Had you not bought that POS, you would not have to go through all this. Does not appear you having a good time. / Word!

Tx! We have a 2024 32rls. Our pull is OK but I can imagine it happening in the future.

They did our install at The Rally& were very happy. 👏👏👏

They did a great job. Glad we had it done. Nice video Rich. I cringed when he cut the wall out😱

Great video!! I just added another thing I want done to our rig. Should have had it done at the rally. He did an excellent job.

Oh goodness.... Hurts to watch cutting that hole!! Good Job Rich, Lynn, Kim and Becky nice upgrade well done by a pro!

You are not far from me!! Shaler Twp

Where can you buy that oven?

Great Video Rich!

I went with rv locks and they seem to do well.

Hey Rich, great job on the mods! We just purchased a 32RLS, and it looks like you have a video for many of the mods that we are about to tackle. I wish you had recorded the install of the dresser outlet, but I did see your description on another comment. Thanks for the videos!

Well another case where an AH buys an Rv/ it falls apart and now the drama starts oh yeah the money flows

Thanks for the review. We have a Level Mate Pro. It is invaluable for finding level sites while boondocking, and working from the driver's seat is a must. One problem I have is reconnecting once my phone screen saver turns on. I have to wait to connect for a few minutes, it is a little annoying.

We went camping here two years ago and really liked it…They have an intact stone furnace which is great to see. We’ll probably go back soon.

Good one, any pizza left over??

After watching your video I pulled out my couch. I had three loose and one broken screws into the floor. I have a slight gap, on the drivers side floor. No daylight, but the plastic bottom wrap is in the gap. I sent Photos to Alliance. I know how I think I want to fix it, but I am waiting on Alliance to get back to me. Keep up the great videos. Reach out sometime and I will tell you how our bedroom slide drive broke at 6 months of use.

Thought you were going to show an install

This is great! Do you recall if the bathroom has those large sinks outside for washing dishes? Thank you!

I watched this video to see how to disassembly the Motor Cover. Looking to install a Sun Shade that slides into the Roller Slot. Thanks.

You can just eye it when mounting it. As far as the screws I found they were fine. It's cheaper then the level mate. You get a unit that you get your best bang for your buck. And no switch it shuts down when your out of the app like you said. Love it. I just took a 4' level in the camper and then set the sensor. Done. Also as far as measuring you get it close and your good to go. One video said you should center the sensor in the middle of the camper. Well you Don't. The sensor does what it soposed to do left right it doesn't matter. Just make sure it's facing front or back on the app. Took me like 5 minutes for setup and instalation and good to go. The only thing was to bad you couldn't hook it up to 12v. But if you change your batterys the same as a smoke detector then you should be good to go.

That belly is not going to rub itself, poor Lexi :) Love the knee pads. Great video buddy

So I can screw the hot black wire into new fuse while breaker is installed onto bus bar. With dual breakers is there a possibility of unbalanced neutral current ?

Hey Bill Martin.....Folks would pay extra when ordering for these stainless steel pieces....

Great job !!

Wow, nice job Rich!

Rich and Becky - it looks amazing. I Love it. Rich, after watching this whole video I realized that I cannot afford you. 😎

Looks awesome. Great job Rich!

I have a furrion and didn’t need a repeater.

Thanks for the video, Rich. Do you know what the roof cap right behind the camera is for, at 4:15 in your video? Is it just an attic vent? I mapped out my roof to add solar panels and noticed it there in my 32rls.

Thanks for your videos, Rich. We bought a 32rls a few months ago and have watched all the videos to this point. Alliance must be watching them too because almost all of the problems you have encountered look like they have been addressed in our 2023 model. I took a look at my island lights, and the mounting box is sloped to leave the lights at equal height.

what size screws did you use? How long?

Thank you for this great video. Staying at sites 40 and 41 which you reviewed right on the clarion river this week. Thank you.

Awesome Fix! I have the same sweatshirt!