Видео

Yo.... that KY joke had me dying laughing

Thank you!!

Very helpful! Thank you!

You seem like the guy to ask about my gasket leak from the cat to the pipe, any redneck fixes aside from welding it?

petroleum based lube on a rubber part??

the second race black and red 12 is my cousin he diesnt know he is on here and there next race is sep 17th i think ima be there

I'm a lady and you made this so easy for me to follow, it was like working in the backyard on cars again with my Dad! You were thorough and gave so much information about how not to die while fixing my truck! Thanks man! Because of you, I'mma be able to fix my own truck!

Literally laughed out loud! I am liking and subscribing. Like your style. sir!

I'm having trouble loosening the belt with the half inch drive. Whenever I try to loosen it snaps right back into place. Any suggestions?

As a former Tacoma owner, everything on this truck is a PITA. From oil changes, to transmission changes, to coolant, etc etc. It's as if it was designed to be purchased and then discarded with when the fluids have run their course.

If there is a need for direct sales car tube bundles from the manufacturer, please contact me

love that look he gives after he says KY jelly.😁

Usac sprint cars at Lawrenceburg or Eldora = awesome highly recommend

I like dirt track racing more but this is a really neat facility no doubt. I will be going to that 100 lap Raintree race if i can

Be a man, spend an hour trying to do it with regular shitty pliers

KY?? WTF 😂😂 life saver bro. Thank you.

Jesus....thank you sir. I subscribed.

could i use aquafor instead of vaseline ?

Those are on tons of stuf. Not just a 90 f450. Do better

What socket did you use to take out the alternator studs?

Excellent video. Just curious what was the price on this job? I ask because the bolt of the idler pully sheared off so now I gotta take the alternator off to get whats left the bolt out. Then replace the pully and belt. I figure i can spend what I save at a shop on tools.

Bro you just saved me a crap ton of frustration!!! YOU DA MAN!

Only thing I would add is there's really no reason to remove the big cowling piece that goes around the front of the engine compartment, it doesn't give you any added room that is useful for getting the alternator out.

Thanks for doing A two wheel drive f 350 greatly appreciated Everyone else does the 4 wheel drive Thanks again 👍

Sir I like your style. A realistic glimpse into what it’s like to work on cars. Never trust a mechanic that doesn’t swear profusely. Thanks for the chuckle. 🍺

Rinse your hoses out with a bit of coolant/ water. then slip it on while it's still wet. otherwise, pretty good. Oh, well, don't get fluid on your hands/ on the outside of the hose. super slippery then.

Is that a 15mm e torx/socket?

Magnet or a little super glue

A bad and failed car with many problems and malfunctions.

There's no way in hell I'd ever let a mechanic like you work on anything like that not even a freaking tricycle

A magnetic socket works fine

Just use electrical tape

Put a dab of grease on the bolt insert into socket!!

Get a snap on magnet adapter.

Just put a drop of glue in the socket

Tape

I use grease

Piece of black tape

Button Magnet inside the socket

Tape

Paper works just as well

I keep hearing fangers, you from Indiana or the Midwest? My dad always says fangers and lag (leg) or warsher. Hes from Indiana.

Or just use a sheet of paper

This is what children are for

In my experience, a piece of painters tape works as well. Tape over the top of the bolt head, stick the socket over it, and that holds pretty well.

When he said torx vs Allen, actually Allen= hex, and torx is a star with a pin head recess which makes it a security level fastener.

Love the name, had to subscribe! Came for the video, stayed for the content.

In all seriousness thanks for the tip here! Now, this mechanic may be a lube expert.

The look at 1:02 is worth the the whole video!

PSA: GM has a special warranty on this part (10yrs/120k). Hope this can save you some money! Here’s the link: static.nhtsa.gov/odi/tsbs/2020/MC-10177367-9999.pdf