- Видео 90
- Просмотров 164 246
DTJoinery
Австралия
Добавлен 18 апр 2023
We are professional woodworkers, sharing the inner workings and experiences that working as a Joiner has to offer.
We are a 3 generational business from Australia that was established by Brian in 1974.
Come and join Gary, Brian's son, and Joe, his grandson, as we share our workshop with you and what we get up to.
Our channel covers a variety of content, including overviews of work in progress, our own projects, machinery usage and safety, and general shop talk. We aim to upload a video every Wednesday/Thursday evening.
We hope you enjoy our content, and if you do, please leave a like and subscribe!
Prov 16:3
We are a 3 generational business from Australia that was established by Brian in 1974.
Come and join Gary, Brian's son, and Joe, his grandson, as we share our workshop with you and what we get up to.
Our channel covers a variety of content, including overviews of work in progress, our own projects, machinery usage and safety, and general shop talk. We aim to upload a video every Wednesday/Thursday evening.
We hope you enjoy our content, and if you do, please leave a like and subscribe!
Prov 16:3
A Look At What We have Been Building | Woodworking Projects
This video is just a quick look at what we have been making over the last 2 weeks.
#woodworking #joinery #woodmachinery #woodwork #dtjoinery #plantationshutters
#woodworking #joinery #woodmachinery #woodwork #dtjoinery #plantationshutters
Просмотров: 245
Видео
A Beginners Guide To Spindle Moulder Tooling
Просмотров 1 тыс.21 день назад
In this video, I give my thoughts on what would be a basic beginner setup in tooling for a spindle moulder. These machines are very individulistic, in that each person will have different tooling requirements, based on the type of work they are doing. This is just a basic all round starter, that will allow you do perform a large variety of work for a somewhat minimal outlay ( still expensive th...
Putting An Insert Into The Docking Saw Table
Просмотров 508Месяц назад
In this video, I repair our docking saw table by cutting out the damaged section, and fitting an insert into the table, in order to create a smaller saw track to avoid breakout on the under side of the timber. #woodworking #joinery #machinery #dtjoinery #woodwork #
How to : Sharpen A Jointer/Surface Planer
Просмотров 319Месяц назад
In this video, I give a run down and show how we sharpen our cutters on the jointer. #woodworking #joinery #machinery #dtjoinery #timber
A Look At The Haigh Tenoner
Просмотров 249Месяц назад
In this video, I give a look at the very old Haigh tenoner. Haigh machinery company was established in 1854 in england. We suspect this machine to have been manufactured sometime prior to the first world war, making it over 100 years old. #dtjoinery #joinery #woodworking #machinery #antiques
Removing Louvres To Match Bottom Panel | Woodworking Projects
Просмотров 249Месяц назад
In this video, our customer wanted us to remove the fixed louvres in the top of these doors and put a flat panel in that matches the bottom. He wanted to paint the doors, so we went with an mdf panel to minimise movement and to give a nice paint finish, the beading was made from pine. #woodworking #joinery #woodwork #dtjoinery #doors
Setting Up The Old Haige Tenoner
Просмотров 3042 месяца назад
In this video, I reset the scribing cutters on our Haige tenoner. This machine has been out of action for around 10 years, due to a burnt out motor. The tenoner is very old, being made in the very early 1900's. #joinery #woodworking #machinery #timber #dtjoinery
Building A Frame Ledge Style Door | Woodworking Projects
Просмотров 1,5 тыс.2 месяца назад
We build a frame ledge style door in this video, it has an arched top rail. This was to replace an existing door in a historical building, so it had to be made identical to the door it was replacing. We used Fijian Mahogany, a lovely timber to work. #woodworking #joinery #doors #dtjoinery #woodworker #skills
A Window Design To Accommodate Some Antique sashes | Woodworking Projects.
Просмотров 5092 месяца назад
In this video, we make up a frame and a sash, add some louvres to it too, to create a window that our customer had seen a picture of and wanted. 5 of the 6 sashes are old federation style sashes that the customer brought to us, we had to make an additional one to match. This window is the main window in their kitchen. #woodworking #joinery #dtjoinery #diy #woodwork #timber
Machining Timber To Match An Existing Profile. | Woodworking Projects
Просмотров 5583 месяца назад
In this video we machine up some 6x2 Western Red Cedar to match a sample of handrail that has some rotten timber in it. we use the spindle moulder to do the profiling and finish off cleaning it up with the no4 smoothing plane and sander. #woodworking #joinery #wood #timber #woodwork #dtjoinery #machinery
Kiln Dried Timber: Is It A Failure?
Просмотров 6423 месяца назад
In this video, I discuss my experience of the last 20 years using kiln dried timbers. Is it successful, or is it really just about getting a return on investments quicker? #dtjoinery #woodworking #joinery #wood #timber #woodwork
Building A Pair Of Gunstock Style French Doors | Woodworking Projects
Просмотров 8433 месяца назад
In this video we make 2 pairs of gunstock style french doors, to match the existing heritage doors on site. #woodworking #joinery #dtjoinery #doors #wood #woodwork #frenchdoors #bespoke
Table Saws - My Thoughts On Some Important Issues
Просмотров 8994 месяца назад
In this video, I discuss the problems I see far too often on youtube and the likes, with table usage and the lack of correct operation. I also speak about an oversight I have observed with modern table saw design. #woodworking #joinery #wood #machinery #dtjoinery #tablesaw #timber
How To - Cut A Flawless Scarf | Woodworking
Просмотров 4314 месяца назад
In this video, I show how we go about creating a scarf joint when it is necessary for us to do so. I use the PP Wadkin dimensions saw to create the cut, this comes of the saw so clean that I can glue up straight from the cut, with no additional prep needed. #joinery #woodworking #dtjoinery #woodwork #machinery #skills
Some of My Rare Antique Hand Planes
Просмотров 6424 месяца назад
In This video, I show off some of my more rare hand planes and give a brief overview of each one. #woodworking #joinery #woodwork #dtjoinery #machinery #handplane
Making Window Sill From 7 x 3 Hardwood
Просмотров 1,6 тыс.5 месяцев назад
Making Window Sill From 7 x 3 Hardwood
Wadkin BEM Spindle Moulder - An Overview
Просмотров 1,7 тыс.5 месяцев назад
Wadkin BEM Spindle Moulder - An Overview
Building A Colonial Styled Curved fanlight | Woodworking Projects
Просмотров 2,3 тыс.5 месяцев назад
Building A Colonial Styled Curved fanlight | Woodworking Projects
Collecting The Delta Spindle Moulder
Просмотров 6585 месяцев назад
Collecting The Delta Spindle Moulder
How To Sharpen A Handsaw - 84 Yr Old Joiner
Просмотров 2,8 тыс.5 месяцев назад
How To Sharpen A Handsaw - 84 Yr Old Joiner
SCM T120C - An Overview Of Our Newest Spindle Moulder
Просмотров 8356 месяцев назад
SCM T120C - An Overview Of Our Newest Spindle Moulder
Wilson 5 head Tenoner, A Closer Look
Просмотров 8816 месяцев назад
Wilson 5 head Tenoner, A Closer Look
Building A Queen Size Bed Part 2 | Woodworking Projects
Просмотров 2946 месяцев назад
Building A Queen Size Bed Part 2 | Woodworking Projects
Building A Queen Sized Bed, Part 1 | Woodworking Projects
Просмотров 1,1 тыс.7 месяцев назад
Building A Queen Sized Bed, Part 1 | Woodworking Projects
Hand-tool Competency, We Have A Huge Problem!
Просмотров 1,1 тыс.7 месяцев назад
Hand-tool Competency, We Have A Huge Problem!
Making An Edwardian 4 panel Door | Woodworking Projects
Просмотров 4,5 тыс.7 месяцев назад
Making An Edwardian 4 panel Door | Woodworking Projects
A Machine That's As Rare As Hens Teeth
Просмотров 4,8 тыс.8 месяцев назад
A Machine That's As Rare As Hens Teeth
Building A Semi Circular Window PT 3 | Woodworking Projects
Просмотров 2,7 тыс.8 месяцев назад
Building A Semi Circular Window PT 3 | Woodworking Projects
Hey, if you let me know what software you are using, what sort of camera, and any other details, I may be able to help resolve some of the technical stuff.
Thanks for the offer, it would appear my usb slot that I was using to download my media has become faulty. I also need to put my camera in for a service.
Hi, My BEM had a large yellow metal guard over the fence/spindle area. I think the front panel slid up and down to adjust to the work. You should have a double hole casting for the vertical and horizontal finger springs. Also the whole table will rotate to use the sliding table.
I've seen them like that too. I beleive my fence setup is not original, in fact I am wondering if it actually belongs on the SCM. Bith came from the same place.
Hi, I bought my first BEM from a guy who sold his yard to Tesco for a supermarket. It was 10 horsepower three phase with reverse and an extra speed with a sliding table and all attachments in nearly new condition. Best spindle i have ever used. Stacked tooling on Iroko no problem with loads of power. I think the power feed was a holtser. Worst thing about it was the small brake pad whivh would regularly wear out. I still have a one and a half inch shaft and collars for this machine.
Sounds like a good buy.
Amazing work you do. Hats off to you.
@@GreenSaxon Thank you.
I like how you join your radius jamb head to the legs with that drawbolt hardware. I would love to see how you attach the vertical rod that operates the louvers.
I don't know that you can still get what I used on the jamb. They are actually handrail bolts, we also use threaded rod at times. I just used a plastic hinge that is designed for plantation shutters. They are a pretty delicate fitting. I have used screw eyes in the past, but they are pretty sloppy.
Breath of fresh air to see real joinery shop on RUclips 😊
Thank you.
Fantastic collection. I had a shop with about fifteen Wadkin machines plus a Weinig four sided moulder. I had two BEM spindles. An MT morticer, disc and bobbin etc etc. Wadkin machines are unbeatable really. Ref your BRA14? crosscut. Surely one of the best ever made. We had a brand new one in about 1968. Incredibly versatile machine and amazingly accurate with a proper Leitz crosscut blade. I still have all the brochures and manuals plus a Wadkin tooking book supplied to Westland Helicopters woodmill in the 1950s.
@majorscope Sounds like you had some nice gear too. We have a BEM now also. Wadkin are my favourite, just great machinery.
Interesting, no thermopane/double glazed panels? Is your area in that sweet spot for heat and cold that makes double glazing unnecessary?
We very rarely use double glazing. If anything, we use low e glass. Our climate here doesn't get too cold. We never see snow, and summers are hot but easily overcome.
@@DTJoinery Ahah, so you are in that sweetspot. Your videos are always excellent. Thanks for all of your work to help us learn.
@valekenny No worries Cheers.
busy is good - business is healthy - keep well.
Indeed. Cheers.
No worries do videos when you can, you guys are the best and thanks for the videos.
@@bccev770 Cheers mate, thankyou!
How does it look after finishing? Is it super noticeable?
@terencemoore554 If you pick the grain, colour, and do a good job of the joint, they can be very hard to see. Most people would only notice of pointed out.
@@DTJoinery just tried on some scrap oak so fingers crossed!
@terencemoore554 Keep practicing, ive had many years to perfect it.
Nice video, thanks for sharing! To live in a country where they have laws against certain tools is wild. I'm sure the average woodworker is far more likely to get into a car accident than a industrial injury, yet there are no restrictions on cars. Also one year without touching a power tool? Any evidence that supports that it is worth it? Seems like the tradesman is being held back in progress
@treystills Our apprentices are more often than not only 15-16 years old when they start. They are introduced to machinery slowly to avoid any accidents, this is how we operate and have done for 50 years. Thanks for your comments.
Great job what adhesive is that you used? Love all of your work
@@alanmooney Thanks. The glue is AV515.
Well done mate. You’re trying to tell people in one video what you have learned in 60 years 😮 only joking. We are still moving forward. If anyone is starting out go the extra and pay out for a tilting arbour spindle. Lats go back to Whitehill cutters ( scary but got it done )
I could do with a tilting arbour spindle😁
I haven't used the AV515 yet, it seems to set up quickly how extensively do you use it, as is is a reliability expensive product, I use mostly use AV180 (yellow) except for exterior work.
@alanmooney We use it all the time. It is a very good glue, and you will never get it apart once set. In warmer weather, it dries in about 20 minutes, up to an hour in winter. It's not cheap but well worth the money, I think it is around $20 for a cartridge, though I buy by the box.
My advice is start with the better euro cutter head like the one in the orange box they can be got with spir cutter for rebate work and euro cutter for all the profits he's shown until you become confident with setting up. The euro heads use alinement pins making the fool proof for beginners.
@joinertanner Yes, I agree. I also wanted to give some other options outside of that set, but for the cost, it's hard to beat, given its versatility.
Great video. Just picked up 2 of these machines (we call them shapers) with power feeders and need to get tooled up so they can earn their keep. Would love to see more content! Especially on techniques for running material through the machine
@truckguy6666 What brand machines did you get? I have 3 other videos of machining different profiles, not tutorials, but showing the process.
@DTJoinery I got a Delta 5hp 1-1/4 spindle with Maggi powerfeed and a jet 3hp 3/4" spindle with a generic feeder. Both single phase! A good bit of tooling with each machine, sort of a mishmash. I've used these machines for years but not often. Retired old boss sold them to me
@truckguy6666 You should have a good machine with the Delta. I bought one for parts, its a very heavy, well made machine.
@@truckguy6666 is the delta a Delta hd?
@jar944 I made a video of collecting it, at the start and end of the video, I gave a closer look of it. I bought it for the fence setup, the machine itself needs a lot of work to get it up to working condition.
Interesting hearing the pricing differences. 40mm heads and profile knives are relatively cheap here. Under $20 per pair is average. Heads are a bit over $100. Cant say ive seen a wobble saw available anywhere. I would likely skip the glue joint cutter and suggest a 180/200mm 15-30mm adjustable groover. (In addition to a 4-15mm groover in place of the wobble saw) the 15-30 will allow someone to cut moderately sized square shoulder tenons as well as grooves.
@jar944 The adjustable groovers here are just over the top expensive, which is why I suggested the drunk saw. Where are you located? your prices are very cheap compared to here.
@DTJoinery I'm in the US. I think I paid under $200 for the 20-39x170 groover and maybe $300 or $350 for the 4-15mm x160 3 peice set. The standard 40mm cmt profile knives were $13 for years. Those were only the knives since we don't run limiters or limited blocks here.
@DTJoinery and I hadn't looked at the exchange rate. Add 50% to my prices.
@jar944 So cheap, those groovers are over $600 here, at least what I've seen. I guess that is the problem when everything is imported.
Wow, the client wanted that beautiful door painted?!? Whew.
@elavynnek4173 Believe it or not, it was for a toilet block that was replacing an old door and had to be the same.
Do you hone new blades, and what do you use to grind the blades; do you have any particular machines or do you just pull them off and use a regular sharpening stone? As always, thanks much for all of your excellent videos and advice.
Definitely hone new blades. A straight knife grinder is needed for grinding. We don't have one, so we send them out to be ground. To do the honing, we use a silicone carbide stone, theu work well, bit wear very quickly.
Hi DT! I jhave just purchase my first spindle moulder, a Grizzly model G1026 manufactured in 2001. It is in good condition. I bought it to do all of the mouldings and T&G flooring in the new home my wife and I purchased recently. I have several years of construction and shop experience (carpenter's kid, many summers helping my Dad, and a few years working with him as an adult). I will be milling about 2000 board or probably about 4000 linear feet of 4/4 oak flooring from trees that were beetle killed in my area and I sawed into lumber, plus coffered ceilings, base moulding, window and door trim, the works. Specifically, for doing significant (for me anyway) amounts of T&G boards, what sort of set up would you suggest as far as hold-downs or feather boards, jigs, etc. Also, is there a cutter head manufacturer and set you would recommend for 4/4 (26cm) boards? My moulder holds from 1/2" to 1" spindles and is 3HP. Fantastic video, by the way. My wife is watching it now as a way to understand the moulders and the dangers involved in improper use. Thanks very much for your video.
@elavynnek4173 Well, enjoy that spindle and make sure not to do anything remotely dodgy. I try to use my feed units wherever possible. If I can't, then we have some springs made from timber that we use. Most spindle moulders have steel springs that can be attached to the fences. If you don't have them, then a simple timber spring/feather board will work just as well. Try to avoid using it free hand, as it is a lot harder to get a good consistent finish, not to mention it opens up possibilities to injure yourself. As far as cutter heads go, i'm not sure what suits that shaft size, mine are all 11/4". I would try and find a head that suits the 25mm, as that will be your best option and give a superior finish to router cutters. The brands I have are Freud, Garniga, CMT, Stark, to name a few. Leitz are pretty good too. I assume you are in the US given you have a Grizzly, I'm not familiar with what tooling you have there, but look up spindle moulder tooling, you should be able to find something online to get the job done. Hope that helps.
@@DTJoinery Excellent advice. I'm dedicating a couple of hours today to making feather boards, and have ordered the hold-down springs from Grizzly. Yes, in the States. Freud was the one I'd figured on purchasing, but I'm going to look at Garniga now. Thank you!
This is genius. One day you have to build another one of these with plans so we can purchase and make one. Love your videos pal. Had to subscribe. Keep them coming all the best from manchester U.k❤👍
@@vinnyrea5608 Thank you very much. I will give that some thought👍
Nice work. Nice machiery. No home shop can afford any of that commercial machinery.
@johnverkler3962 Thanks. Size, space, and power would be the bigger barrier.
Wow! This looks like an interesting channel. I recently found myself looking at woodwork, mainly doors and windows, and thought how beautiful they were. Now, they are all being replaced with uPVC. I bought myself a set of books on woodworking from the early 1900s and the 1960s in the UK, which show you how to make them. I just can't get my head around the scribing part where the stile joins the shaped rail, etc. Your channel looks great, though. Thanks for sharing. It doesn't look like you use double glazing there?
@leeedwards3783 Thank you. Thankfully, pvc isn't used here much. Hopefully, it won't be for some time yet. Double glazing is used but not like in the UK. I prefer single low e glass over double glazing, just my preference. Thanks for commenting, and we hope you enjoy the channel.
Thanks
No worries.
Gary, I think this is great! So few people hone their knives here in the states, it nice to show people how to get some more life out of your blades. I do personally find that that all my knives come in from the grinders with a bit of a hallow in them. My assumption is that it has to do with heat build up as they’re grinding them.
@joshuahayes1272 Yeah, not many here do either. The hollow could be from howbl they are grinding them, if they are going over the centre more than the ends of the knives. We have to be careful with our wet wheel for chisels and plane irons, for that reason.
🇬🇧🇩🇰😀☕👍
😊
thanks for making these clear and intelligent videos
@@toozip9617 No worries.
How easy do you find it to set up the knives on the tenon heads after sharpening?
@amhjoinery2060 It's not too bad, we just setup a template so all the knives are the same.
What a beauty mate. I’ve got a haigh spindle from about 1912 I believe
@amhjoinery2060 I've not seen a spindle of theirs. How do you rate it?
@@DTJoinery are you on Instagram? I’ll send you some pictures
What a beast! If all else fails you could always melt it down and build a yacht hull, lol
@@illyakuryakin5024 Haha, it certainly has some weight to it.
lovely machine, I love the shape of the cast iron parts, what a beauty. I would guess 1920's on age but difficult to tell. I would keep the switch gear, nothing wrong with it and much better and safer than modern plastic ones.
@markpannell4058 They certainly put a lot of thinking into design back then. I'm not sure on age, apart from very early 1900's.
Fascinating how you use, repair and jerry-rig these beasts. Wonder how ‘fun’ it is for you to get these in working condition or keep them in production vs just doing what you have to out of necessity. Necessary evil or more than that?
@ericerf6837 For the most part, being so well made, they really don't need a lot doing to them to keep them going. I get a lot of satisfaction from having, using, and maintaining them. They work just as well and, in most cases, better than any new machinery. They are basic machines and require skill to operate as opposed to todays computerised equivalents. That's what I like. They are also as reliable as the day is long.
Good to see the big boss make an appearance,
@@davidnewton6241 Haha, she is here nore often now.
🇬🇧🇩🇰😀👍
😀
🇬🇧🇩🇰😀👍
😀
Nice looking door - good job. I've started cutting almost half way with the TS, then flipping it over and almost cutting half way again. I then finish the small middle section on the band saw. I don't like surprises and even with a riving knife, there's no guarantee it won't bind up. Cheers
@justcruisin109 Cheers. For the most part, its trouble free. The problem is kiln dried timber, having a lot of stress and tension, coupled with timber coming from younger and younger trees. It certainly isn't a bad option to finish it off on the bandsaw. We occasionally do that with bigger boards.
Hey DT i am a wood worker too from jamaica i subsribe and look forward for your videos all the time
@DamionBrown-zp7jv Hi Damion, great to have you with us. Thanks for commenting.
@@DTJoinery yes sir your welcome
Keep up the good work
@@DamionBrown-zp7jv Thankyou
Thats an old one. Most SCM stuff I wouldn't touch with a ten foot pole to press the start button. But I have used the later t 110 and 120. They are okay. The fence assemblies arent the best but they work. You can set them up as a single end tenoner if you get an aftermarket clamping cradle. Takes up less room but not as fast as a dedicated machine of course.
This one is a good machine, it's quiet and nice to use. I dont have the original fence for it, sadly. All cast iron, similar in a lot of ways to my BEM.
The old delta unisaw was a decent machine. There's hardly a woodshop in America that doesn't have one. But most of their stuff is kinda second rate. I hated Rockwell Delta bandsaws and thicknessers. The shapers aren't much chop either. They did make good drill presses though.
This is the only one I have had any experience with. I only wanted the fence, though.
Gor blimey four tenoners, no one's got four tenoners but you are right when you got machines setup it becomes a production line much quicker, we had seven spindle moulders setup only for doing kitchen doors.
Yes, I am the only shop I know that has more than 1. It definitely pays off, though, if you have the room. The advantage of being able to walk up to a machine and press the button and go, compared to constantly having to set up, is huge. Yep, we have 6 working spindles too😁
@@DTJoineryI thought I was nuts with my 8 spindles! 4 tenoners! That’s a lot of floor space. Like with the spindles it saves so much set up time though
@amhjoinery2060 Yeah, spindles are a must. I also run 3 morticers and 4 radial arm saws, 2 jointers, and 3 table saws, each one set up for a different purpose. Also, because I like machinery😁
wonderful information, I own 5 RAS...all Dewalt.....16 inch, [3 ] 10 inch and a 9 inch.......thanks
@@ypaulbrown Thank you.
Thanks for your videos. I love old English woodworking machinery. I'm retired and my Wadkins live in my garage/workshop and are hobby machines. I have a 1925 Wadkin LP recessing and boring machine (like an LQ); a 1926 Wadkin RB 9" buzzer; a 1936 Wadkin CK radial arm saw*; a 1945 Wadkin PK dimension saw*; another (untagged so I can't date it, but ~1946) Wadkin RB 9" buzzer; a 1951 Wadkin RT 6" wood lathe; and a 1928 Preston Woodworking Machinery (Canada) 30" bandsaw*. Some are undergoing overhaul, * some are runners.
@johnvannisselroy6197 You have a good collection there. Wadkin are my favorite machine's, they are made so well. I did have an RD 16" jointer. An ECA tenoner An EKA tenoner I sold them some years ago, I wish I kept the ECA.
Thanks for the tour. Looking at your EP spindle moulder, you suggest it was built around 1960. More likely between 1946 and 1951. What's more, it appears it was built by Sentinel (the steam lorry building company) for Wadkin. If you look on the left hand side of the base there are three tags. I'm sure the bottom tag says "Manufactured for and to the design of Wadkin Ltd by Sentinel (Shrewsbury) Ltd". Apparently after WW2 Wadkin had too many orders and so sub-contracted out the manufacture of some machines. Sentinel seem to have got all the EPA sub-contracts. Cheers, Vann.
Thanks for the info, I will have a look at that today and see what it says.
@@DTJoinery It's a pity you didn't include pictures of the tags of your other Wadkins, then I could have used the test numbers to give the year of manufacture of each of them (not the BFT & BRA as they were built in one of the former Bursgreen factories - and used a different test number system).
@johnvannisselroy6197 Yeah, I didn't think of that.😊 I know the date of some, my Dad was an apprentice for the company who bought the RE brand new. Our friend bought the EQ brand new. My 6 header, I learned last week, is a 1993 model. Most of the others, I have a vague idea, that's about it.
Thy
👍
All the time, it’s a nightmare. Even in accoya it can happen 🤷 I usually get a ‘feel’ for how it’s moving and over cut based off that , ie. skim face and edge and leave a bit of time .. then repeat… and if it seems to have settled down I’ll thickness. Even then sometimes I’ll pop it on a pile on jointer over night‘weighted’ Worst I ever had was a couple of cube of ‘thermally modified hemlock’. At least 60 percent was shot to shit inside / totally unusable from about 3 mm in the whole way, it was shocking. Some you could pick the cell collapse just looking at it in the rough!! But some caught you out. The most annoying thing was the ‘good stuff’ was fantastic !
@Dazza19746 So irritating, so much good timber ruined. They need to come up with a better drying method, or at least slow it down.
Wow! Nice work Gary. It would be interesting to see it in place. Strange having frosted glass for a kitchen 🤨 Maybe the view was not to their liking 😁
Thank you. Yeah, I'm not sure why they wanted obscure glass. Hopefully, I will get a picture of it installed.
Nice work integrating the old and new. Cheers
Thank you.
That sure is a unique looking window. Nice job!
@brycecomerwoodworks It's definitely different than the norm.