Видео

I have 14 cushions I need to cover and I’ve been putting it off bc it’s so daunting. Your video is THE BEST one I’ve seen! I’m inspired!!! Thank you😻

It's just genius!!!

Toca aprender ingles

Totally agree with your huge support and adoration from these followers. I’ve watched many other videos but yours is the best!

I was looking for piping!! That is not easy to put piping in.

Very nice

Awesome! Can you do more of these for different things ?

I really appreciated your video! Made a long bench cushion (and two back cushions) for my daughter's dorm and was originally not going to do the long zipper up the sides, but after my struggle to fit the wrapped cushions into a thin cotton casing with practically the entire back seam opened, I decided to do it your way for the final cushion covers, and it was so much easier. I used a concealed zipper method, but that was the only difference. They came out beautifully!

im watching this after cutting way too many pieces for my cushions. thank you

Great video and instructions but I'm pulling my hair out over the zipper. As mentioned, unless your zipper is wide, even staying as close to the zipper as possible I can't get the half inch seam allowance. You did mention this. My question though is when you do the side seams do you use a half inch seam allowance and then taper it in when you get close to zipper to match that? That is hanging me up. It doesn't seem to be an issue for anyone else so I'm wondering what I'm missing. It seems no matter what, it's going to mess up how the cover fits. Thank you.

What a great “update” to the first video. As I’m a beginner sewer I did need to tell myself to just trust the process about the folded edge box corner. This video helped wrap my brain around it

This is pretty straightforward, thank you

Do you have a video on how to make a box cushion cover, but no zipper, just the over hang of material like a pillow case ? But the little flap to still cover the pillow / cushion

Wow!!! Because of your video I was able to make an L -shape cover. So proud of myself due to getting the measurements right😅. Thank you so much❤❤❤from South Africa

To put a cushion cover on I put the foam cushion in a garbage bag. Insert it with the open end of the garbage bag in. Fold the whole thing in half if necessary. When the foam is in place pull the bag off of the foam and out of the cushion cover. Works pretty good

best tutorial to make box cushions! Thank you so much for making it fun and especially easy!!

Both your original boxed cushion tutorial plus this updated version are wonderful. I have watched so many videos, and your videos make the most sense to my brain by far! Thank you!! However, I'm struggling because my fabric is only 54" wide and my cut material needs to be 57x57 according to your formulas. I need to add a seam somewhere to get to 57", but I'm struggling with the math and where to add the seam so it doesn't show. Do you have any other videos or recommendations? Thanks!

I’ve been sewing for about 50 years, never thought todo zippers like that, thank you. One thought for fraying fabric, just zig zag if you don’t have a serger. Thales a bit more time and thread but worth it, especially on edges you zipper. I also spray with Scotch Guard, resists stains & moisture.

Awesome tutorial thank you ❤

Do you remember where that fabric is from?

Hi 👋🏽 Thank you so much for this video! I got all the way up to the end where you make the last two cut outs at the corners ..Quick question… if my cushion is 4 1/2”, what should my corner measurements be? Thank you in advance for your help

Best tutorial I have ever watched for box cushions, you just made my life easier, thank you

Awesome tutorial! I was going to just turn my outdoor fabric into a huge, long pillowcase for my 6' bench cushion (×2 for seat and back) till I found your tutorial! Thank you for telling us the thread you used. I might've used regular thread. It's been about 20 years since I've done any sewing. I'm a little nervous about the project, but I'm sure with your tutorial, I can do it! Thanks again!

Thank You... it is through MTN my fears of living in this country quelled. I haven't talked to my daughter snice she voted for Trump the 2nd time.. through her prayers.. I told her she needed to check who she was praying too.. Hopefully that will now be healed.. ATY

I have been trying to find a tutorial to be able to make one of these box cushions for outside fabric and I have watched many of them. Your tutorial is so well done that even a beginner could make one. Thank you I appreciate this tutorial so much.

This is the absolute best video to make this cover! Thanks so much! Great tutorial!

I have a long foam matress that my dog loves and it needed a new cover and your tutorial was fantastic. I bought the really long zipper and made it and it came out really good. Thanks for your tutorial

My cushion measures 40 x 15. That is the size foam +3 inch height of the foam. My measurements were 37 for the depth and 44 for the length. It is not long enough and is too deep. Any suggestions that I might do to fix this problem as it is quite expensive for the foam and fabric. 20:42

Why is my cushion cover too small? My cushion measures 40 x 15 and the foam is 3 inches I cut the depth to 37 and the width to 44 is that correct? It is not long enough and too wide. Any help would be greatly appreciated as materials and foam are quite expensive.

Do I need to protect my foam with anything for outdoor patio cushions if I’m using the canvas waterproof outdoor fabric

I purchased this and am wondering if this type of matting will work: Light Weight Bonded 100% Polyester Batting 4oz 48"?

Excellent demonstration. So simple. Thanks

hi, novice sewer here. I followed your directions for measurements to a tee, but it’s rather loose fitting. What did I do wrong?

Just now watching this video and have a much easier way to do those last 2 corners. Just orient the seam to be in the middle of a triangle and sew over the wide end of the triangle the correct depth you want the corner to be. Reinforce the seam and trim to the 1/2” seam allowance you are using and voila’ you have a quick corner.

I love your tutorial! You explained the process very well! I am going to make my cushion very soon! Your method is fantastic! Thank you!

This is the best video I came across! I found another video describing corners only which was great too. I started practicing with an environmentally friendly canvas drop cloth, minus the zipper. It actually looks nice. I used 5 inch foam with half inch Dacron. It's a little on the firm side. This is a 1960-70's cushion redo from my grandparents old wood den set. Thanks again!

I just finished making a futon cover using your first video last night and thought I would review the video again, just for memory sake, when I suddenly ran across your new updated video. Your first video was very good. My only complaint was that it was not in landscape mode so this video is much easier to watch, and very instructive as well. Thank you for taking the time to teach us all how to make cushion covers you are the best!

Funny, I’m covering some cushions with the same fabric!

Thank you , do you have a tutorial for curved back cushions? Your explanations are so very easy to follow.

You have done an amazing job with this video. Thank you it was exactly what I was looking for.

I didn’t find this as easy as I hoped 😂 but I was making a 2m long box cushion which might have been part of it. I really battle to make the zip ends neatly into the seam. Lit if ripping & redoing

i'm wanting to re upolster my boat cushions with curves and even one inside corner. Can this method be used for them?

Love your video

Thank you so much for taking the time to share this with the rest of us. I enjoyed the video and learned a lot, including the difference in zippers. I never even considered the different options. You are clearly very skilled and watching your speed, vs my own, reminds me that I’ve got a lot of practice ahead of me. I’m a mid 40s man who is always trying to learn something new. I purchased my “project runway-Brother” machine a few years ago but was soon sidetracked with 3D printing as my winter project. I’m hoping that someday one of my daughters will come to me for help sewing something. By then I hope to be able to show off my superb sewing/ upholstery skills and blow their minds. Thanks again for sharing your knowledge and experience.

Great vid. I made a dog bed using the first video. There was nothing wrong with the vid. Just requied a bit of attention and note taking. Thanks for taking the time to make these.

What an excellent tutorial! Thank you so much for this great video. I’m making two cushions for me and my husband and one for our 18 year old poodle/bishon so she can be more comfortable.

super et très facile pour des coussins droit j le garde

Great and easy to follow video. Thank you for an easy way to cover cushions!

Just wanted to say thank you for this video!! I am a total novice (this was my first project ever) and I was able to completely transform a $100 FB marketplace sofa and chair with new cushions. I even used the pattern to make the back cushion cover inserts (just didn’t add a zipper) and everything came out so beautifully. Can’t thank you enough!

question: if my cushions are not square, how would I calculate the measurements?