Видео

I have upgraded my one with a brushless fan motor (150W 25,2V) which is available for 5 bugs only and fits in without any modifications. The vacuum cleaner is now more powerful and less noisy.

Mine is less than 2 months old, and has already developed multiple cracks around the nozzle where the extension tube slides in. It has done less than 2 hours of use, spot cleaning around the house. It is very obviously not the correct grade of plastic for this use. I would not recommend buying one of these as they are not fit for purpose i.m.h.o.

The entire mouse! Lol. Thanks for the video-I'm never buying one of these again.

How many screw driver type to do all of this stuff?

does the on /off switch lock on or has to be pressed while in use?

just completed my G604's repair. Here's to hoping it lasts long enough for a proper successor to appear.

when i enter /dev/serial/by-path/* it doesnt work, it says there is no directory with that name. ok i figured it out. i had the wrong STM chip entered. make sure to double check your board to make sure you have the right chip

surprised mine lasted as long as it did. It broke last year and making the effort to fix it now

This video is maybe the only thing online available now on how to install a hemera! Why does e3d not have any guide on their own products?

once i enter biqu as the user it doesnt let me type. EDIT: i found the answer. it just doesnt show what you type and i wasted 10 minutes of my time being angry because putty has a dumb password feature.

Hi do you know if this will work for the ZV-1F as well?

This sophisticated design seems to be a good way to implement the planned obsolescence. The easy fix for such an issue (in my case unexpected double-clicks) is a drop of silicone grease or so. I am using 5-56 and it works fine with most of the switches - can forget about the issue for a year at least. The only issue with this mouse in my zoo - it is very difficult to get there. The first G604 mouse I returned under the warranty. And the next issue happened a few months after the warranty was expired. So I got to fix it. But I did it with a syringe that time. A couple of years gone and it is sick again (along with the old M325 that is constructed in a way that much easier to access and lubricate her switch). This time I got the paperclip (peace of wire if you wish), sprayed a bit of 5-56 into a tiny cap, got some of the solution on the tip of the paperclip (that I slightly bent as a bow), and entered it into the gap between the left button and the housing from the front of the mouse towards the back. As it seen in the video from 4:00 to 4:05, the white switch button is situated somewhere in between the + symbol on the auxiliary button and the center of the wheel, so you got the idea where you have to poke the oily stuff. As long as there is a sufficient amount of the silicone grease on the top of that button it will find a way to get into the switch and lubricate/clean/cover the mechanism and contact points inside. I spent a few minutes poking and now back to work enjoying prompt response without unexpected double-clicks. I hope the Logitech company will change the way of manufacturing and would not celebrate the planned obsolescence, but will please the users with a long-lasting devices as it used to be in the beginning.

what if I only want to use it for clipper screen for remote control?

Thanks! With your guide I was able to fix my double click issue. My first time soldering project was successful!

how come mine wont connect to my WIFI?

Hi, can u make a Video how u install the BLTouch to the Chiron and which Firmware you use ?

my package is lack of ducky :(

It uploads everything except the language file. An error message appears. Display V3.0.1 Everything is fine on the V3.0 display. Do you have any idea?

What's the point of this upgrade if the print quality looks the same as stock?

After typing "make menuconfig" I get this response "make: *** No rule to make target 'menuconfig'. Stop."

thanks this guide helped me fix my g604 and its double clicking pita!!

Hey what size are the belts?

You don't need bags but filters.....

Which switches can i use for G4-G9?

amazing !

Hello, how to recover when the electricity is cut off?

was going to order the tft35 then seen it does not work with klipper then was going to use my rasbarry pi. into i seen a pad 7. seen your video saved video liked video shared video. you shown me everything i needed to know and made it very easy to understand thank you. also i got a sunlu in the corner over here. steppers dont work d.o.d going to turn that into a bigtreetech setup next. so asking. there is no need for a pi3 or 4 with this. just the pad 7 and a skr mini e3 3.0 ?

Thank you, this was the most helpful video in this topic.

In case anybody is trying to fix the middle mouse button because it doesn't click anymore pay attention at 5:30. In between the springs you'll have to cut a slit open on that orange protective cover with an exacto knife so the little disk comes put. The disk is supposed to be dome shaped not flat. Just take a ball point pen and press into the disk until it looks dome shaped again. Not too much or else pressing down will feel too stiff. Wrap a narrow piece of electrical tape around the disk and board to seal and secure the disk. Thanks to the reddit guy that suggested this and this channel for showing us g604 users the path to repair.

Hinestly... I just use the heat gun and they came out easy lol. Works like a charm now, thank you got the video. 🙏🏽

Thank you for this. I just got the BTT Pad 7 and this was everything I needed to get it up and running.

The thing I don’t like is that you cannot block the trigger. Have to pulll all the time. To bad because autonomy so good with 18v battery

Hi! do you have a tutorial how to use the ADXL34 that is included with the BTT Pad 7? i'm at a loss here on how to use it.

i just lifted my pointer click mouse button and used a cotton swab with alcohol on my switch and it hasnt had the problem since. take battery out.

did not work for me you jump over things thinking we know what they are some of us older people are not that computer smart

Bro fucking 1 handed that printer like a fucking toy. I can already tell this is going to be a great video.

As a person who used to solder boards practically every working day for a few years as part of my job. Not a bad technique. My only criticism is that you used far too much solder and i would have like to see you clean up the flux before starting to rebuild the mouse.

Wow, Now I see why they stopped making this mouse. I do phone repair for a living and have since about 2007 and this looks like it will be more complicated then more phone repairs. As a tip though get yourself an isesamo. Get an actual name brand one take some fine sane paper to the tip and sharpen it slightly. Having a good isesamo for opening things is beat by nothing.

replaced mine with kaihl GM 8.0 switches, was time consuming but very easy

I've been out of the 3d printer tinkering game for too long, I want to do this to my Chiron but I don't think I have the patience to do all of this plus the firmware update 😭 It was the best mod for my CR-10S by far.

This is far to complex... If i buy a kit it should be plug n play and not need all the diy'ing of wires and brackets. Good video but bad kit!

I have seen several of these kits advertised and most use a mgn12c rail instead of the mgn12h that is used on the y axis. Do you know why?

thanks i replaced the switch on my G604 by watching this video

I can not thank you enough for this detailed, clean video of the process. G604 is a wonderful mouse except it has this horrible, apparently "incurable" issue of double click. Almost a year back, I got mine replaced with new one under warranty but within 2 months the issue popped up again. It had been extremely frustrating. While searching for possibilities of replacing switches, I stumbled upon your video and got back some confidence that this mouse can be brought back to its senses. Finally got Japanese OMRON switches, replaced them myself, following your video. Now with new switches, the mouse is working just the way it is supposed to. I am so happy and relieved. Thanks again. Best wishes. :) :)

I love this mouse and I hate that Logitech discontinued this product. Now that I start having issues with it. I'm looking into repairing it. But seeing this. I know I have to find another product. I repaired a few smartphones and this looks way harder than that.🤔 Thank you for saving my time!

why would you replace a limit switch bed sensor for a bltouch when the limit switch is far more accurate?

I tried and failed but thanks for your video, it saved me time. I damaged the printed circuit due to my poor skill, it's no longer solderable. Anyway, it was no longer under warranty. 2nd logitech dead with a double click problem after only a year or two, I'm done with this brand of scammers which doesn't care about its customers, moreover, the customer service is pitiful... For such expensive equipment it's shameful.

An expensive paperweight! This is what you will get if you buy a product from Sunlu, good luck trying to buy a spare part

any chance you can see these in UK?

There are 3 main things wrong with this mouse: - double-click issue - rubber grips peeling off and falling apart - over-engineered af After about 2 years of use, my G604 is now having the double-click issue and its rubber shell is disintegrating (I don't have sweaty hands, if you should know). So, earlier today, I decided to take it apart. After struggling to get the outer shell off, I was greeted with the most complicated mouse internals. It's even more complicated than the already complicated G602 I also took apart before (it was also exhibiting the double-click issue). I gave up and decided to watch RUclips videos of this mouse's teardown so here I am. 😅 I'll get back to it once the replacement switches arrive.