Видео

Less talk more action ! 🤙🏽💪🏼nice job bro

Ha funzionato 🎉

Bro, why take off so much to get the drive shaft lose? You Dont Even have to loose is. But since you want to do that next time just loose the over steering rack to get it to twist thats it.

Nice step by step video 💯

Now I know what to do for mine because it seems to be not letting much heat build up it would be better to replace it then to flush it out

Thanks!

Bet that extra lift caused the problem. What keeps that axle from rocking back and forth besides the drive line?

My car f150 3.5 2011 throws code p0001 and has a rattle in the pump when I disconnect the power cable it stops making the noise I can also add that I changed the spark plugs and ran it about 2 miles and put the pedal to the floor and it didn't accelerate and after that I realized the pump wire for this pressure was not connected and when I connected it and it started to make that deal I hadn't made before and the verification engine turned on. And they told me it was the fuel pump but could someone tell me if it is the low pressure fuel pump or the high pressure pump, or the connector, thank you very much.

would you like please to told me about the all beetle engines types without turbo ?

Gran trabajo. Excelente video. Gracias

Can you tell me where is „max” on this oil stick? I just bought a twingod and im confused about it 😢

Can this clutch replacement method be used on a 2005 Audi A4 Base Sedan B7 2.0T too?

Now that I see how they work and are installed I can very easily make one myself and just weld it directly to the frame

Thank-you for making this video. It was very interesting to me. I subscribed for you. Take-Care, Mike.😃😁

Excelente video

Fantastic video. I am considering a used A6 with this problem.

Cool but for the price I just bought a camera and cut a hole to mount it. Nice vid

Wouldn't it be cheaper to just replace the spring?

Ótimo vídeo!! Pode ensinar como regular alavanca seletora!!!???? Obrigado

take a sawzall or body saw and cut the firewall bigger from under the hood.....just make one big hole and it will go in much easier....then take some great stuff fire rated foam to seal it up once you know you are leak free...

Just got a "fix offer" from a mechanic, he says they need to replace some parts and it'll be 400 euros... I don't think I can sell the whole damn car for 400 euros!

Hi Great Video and explanation without unneccesary comments, Im performing the same Job on my Audi A4 2003 and have a Question. How many Bolts did you remove to the Steering Rack from Bottom and Below and what Tool you used? it seems to be a Torks or some similar Tool Thnaks for Feedback 🙂

Great video, one of the best and simplest I’ve seen for removing lock assembly and fixing this issue. Looking for some post install help after swapping out the door lock the electrics behave like new, unlock with fob or key and windows drop as needed to clear hood the problem now that the passenger door won’t actually open from the inside or the outside. Before closing door the window dropped and the puddle light was on showing the new assembly was working, closed door now it won’t open - what did I do wrong?

who uses self tapping screws for a damn exhaust mount....

My beetle gives yellow oil light what can i doo?

Wat kinda wrench is that u used to take off the sway bar link

"Dont buy aftermarket pump". Okay, which pump i have to buy for my DI?

Hello, if been watching your rebuild on the 63 buick skylark, you did a Great Job man. Congratulations!!!!! I have a Question? What air nailer are you using, and what type of nails are you using please 🙏. I'm getting ready to do the head liner on my 63 2 door Coupe and I need to staple it in along the Sail Pannels and a few other spots. Them you. I appreciate you and your videos.

I bet you didn't put correct steering fluid in the system :/

Mam this video is awesome. Nice 63 buick. I got a 2 for Coupe, same carb and 215ci. V8. Love the video 😅😅😅

Bro ik heb ook zo 1 gekocht 951 alleen nog nooit op kunnen varen want ik heb het gekocht en het motor blok laag uit elkaar en ik komt er maar niet uit😔

Is differential for 2001 4x4 manual dakota the same as the automatic or different?

Boss what is the number of timing belt

I put one on my 2000 ram 2500 2wd and it helped a lot

This is the best video I have seen and also with minimal removal of parts. I already changed the passenger side thanks to your video within 30min and planning to do the driver side soon. Looks like I need to drill out the mounting hole and come up with a nut and a bolt.

is this a box 5? if so which clutch do I need?

Great video. Perfectly made. Many thanks!

I love it but the offset would bother me

Best i have seen, brilliant, love from England UK 🇬🇧

Danke das hat funktioniert ⭐️⭐️⭐️⭐️⭐️

Can't seem to figure out how to get the heater core lines in through the firewall into the engine compartment

Great Video!!! Does anyone know the torque specs for the 2 bolts that are at the 4:29-4:34 of video?

Can I ask you a question please? What is that ring? You put back in the pan after you cleaned it up thanks. I enjoyed your video.

How much product did it take to do this top?

very helpful

I saw that snappedbolt 😆 😆

You do realize that everyone of those parts have torque specs.

Hello. from which company did you use the coil and cables?

This is really one straight forward video of the process which is absolutely perfect! Keep up the good work!

Es hat super funktioniert. Dankeschön!😊