- Видео 52
- Просмотров 115 092
MadCao
Добавлен 1 ноя 2010
Mode SixtyFive V2 PC with Lubed Broken-in Cherry Mx2a Oranges on Alu Plate
Keyboard: Mode SixtyFive V2 PC
Plate: Aluminum
Mount: Full Lattice Green
Switches: Lubed and Filmed Broken-in Cherry Mx2a Orange
Stabs: Staebies
Keycaps: GMK Rainy Day R1
Deskmat: LampKB Concrete Deskmat
Always find myself going back to Cherry switches. The Macchiatos were good, but the Cherry just hits different.
Plate: Aluminum
Mount: Full Lattice Green
Switches: Lubed and Filmed Broken-in Cherry Mx2a Orange
Stabs: Staebies
Keycaps: GMK Rainy Day R1
Deskmat: LampKB Concrete Deskmat
Always find myself going back to Cherry switches. The Macchiatos were good, but the Cherry just hits different.
Просмотров: 1 054
Видео
Mode SixtyFive V2 PC with Factory Lubed HMX Macchiato on Alu Plate
Просмотров 1,1 тыс.2 месяца назад
Keyboard: Mode SixtyFive V2 PC Plate: Aluminum Mount: Full Lattice Green Switches: Factory Lubed HMX Macchiato Stabs: Staebies Keycaps: GMK Rainy Day R1 Deskmat: LampKB Concrete Deskmat (ty goat @lampkb for bringing this to market) I originally built this board with MX2A Oranges with Iso top mount and it was pretty good. I was really surprised when I switched to the green full lattice block mou...
KmanCult 2/65 with Lubed Cherryburgs on Polypropylene Plate
Просмотров 7566 месяцев назад
Keyboard: Kalam Keycult 2/65 Unfinished Red Plate: Polypropylene Mount: Gasket Switches: L F Cherryburgs (Cherry housing, kailh burgundy stem) Stabs: Staebies Keycaps: GMK Burgundy R3 Deskmat: GMK Demon Sword Clones bad; however, I feel like Keycult will never release an anodized 2/65 like the Unfinished Red again. I don't want to pay that egregious aftermarket price either. That being said, th...
Chimera65 R2 with Lubed OP Black Switches on Carbon Fiber
Просмотров 1,9 тыс.6 месяцев назад
Keyboard: Chimera65 R2 (Berserker) Plate: Carbon Fiber Mount: Gasket Switches: Lubed OP Blacks (205g0, 105 on TX 65g long springs) Stabs: Staebies Keycaps: GMK Modern Dolch 2 Deskmat: GMK Demon Sword Artisan: Chimera Cap Board so good I bought it thrice. I originally was going to pick up the Prism SE colorway on extras, but once I saw the red, I had to get it. Overall, R2 is a nice refinement t...
Singa Unikorn r2.2 with diamond-polished NK Creams on FR4 Plate
Просмотров 7726 месяцев назад
Keyboard: Singa Unikorn r2.2 (Reseda Green) Plate: FR4 Mount: O-ring Switches: L F Diamond-polished NK Cream by Joechuu Stabs: TX Stabs Keycaps: GMK Botanical R2 Deskmat: GMK Demon Sword Had rebuilt this for Joe last month, but I haven't had a chance to record a sound test for it. Much better build vs the Zakus imo. These switches are Joe's first trial at diamond polishing and they turned out p...
Singa Unikorn r2.2 with Lubed Zakus on FR4 Plate
Просмотров 4738 месяцев назад
Keyboard: Singa Unikorn r2.2 (Reseda Green) Plate: FR4 Mount: O-ring Switches: Lubed Zakus Stabs: TX Stabs Keycaps: GMK Botanical R2 Deskmat: Tinyland (Autumn) Sorry about the desk noise. Another one of my friend's boards. The build probably isn't my favorite, mostly because I'm tired of Zakus. Otherwise, the Korn is very nice!
JJW Moment with Diamond-polished MX Browns on PP Plate
Просмотров 7668 месяцев назад
Keyboard: JJW Moment WKL (DUSK) Plate: Polypropylene Mount: Half-gasket Switches: L F Diamond-polished MX Browns (Vex; 2:1 205g0/105 Mix, Sprit Springs 57g SE, TX Films)) Stabs: TX Stabs Keycaps: GMK Tuzi Deskmat: Tinyland (Autumn) Sorry about the desk noise. This is my friend's board, and I'm very glad to have the chance to try this it. I was in the GB for this, but later canceled due to me no...
Singa Kohaku R2 with Lubed Broken-in MX Blacks on Alu
Просмотров 3,7 тыс.9 месяцев назад
Keyboard: Singa Kohaku R2 (Black) Plate: Aluminum Mount: Gasket Switches: L F Broken-in MX Blacks (1.2 Million Actuations from Nomkeys, 205g0, 105 on springs, spring swapped to TX Long 65g) Stabs: TX Stabs Keycaps: GMK Mictlan Deskmat: Tinyland (Autumn) It's been several months since I sold my R1 Kohaku, mostly because I didn't use it as much anymore and the silver color was boring. Once R2 uni...
TGR 910 V2 ME with Lubed Vintage MX Blacks on Alu Plate
Просмотров 8729 месяцев назад
Keyboard: TGR 910 V2 ME Mount: Top Mount Plate: Aluminum Switches: L F Vintage MX Blacks Stabs: TX AP Keycaps: GMK Jamon R2 Deskmat: Tinyland (Autumn) Backplate: Copper (Hype Keyboards) Force Break: Yes Changed my polypropylene plate to aluminum and it sounds even better. MX Blacks on aluminum never ceases to impress me. I also picked up a copper backplate and GMK Jamon R2. The board is now com...
Singa Jaguar v2 with Factory Lubed Sarokey x Geon BCP on Alu Plate (X-Ring)
Просмотров 700Год назад
Keyboard: Singa Jaguar v2 Mount: X-Ring Plate: Aluminum Switches: Factory Lubed Sarokey x Geon BCP Stabs: Staebies v2.1 Keycaps: GMK Mictlan Deskmat: GMK Mictlan (El Camino) Internal Weight: Yes Artisan: GMK Mictlan HIBI Artisan GMK Mictlan is one of the last GMK GBs I joined that I was really enthusiastic about. It finally delivered this past week and it came out so nice. The novelties really ...
TGR 910 V2 ME with Lubed Vintage MX Blacks on PP Plate
Просмотров 976Год назад
Keyboard: TGR 910 V2 ME Mount: Top Mount Plate: Polypropylene Switches: L F Vintage MX Blacks Stabs: TX AP Keycaps: GMK Dualshot R2 Deskmat: Tinyland (Autumn) Backplate: Carbon Fiber Force Break: Yes Found a nice deal for this red 910 ME and couldn't say no. I've been liking red a lot more lately in keyboards. Tbh, the board in its stock form with the PC plate isn't that great. It sounds hollow...
Iron165 PC with Factory Lubed Mode Obscuras on Carbon Fiber Plate
Просмотров 524Год назад
Keyboard: Iron165 PC Mount: Gasket Plate: Carbon Fiber Switches: Factory Lubed Mode Obscuras Stabs: Staebies Keycaps: GMK Reforged Deskmat: Tinyland (Autumn) Foams: No foam Polycarbonate Iron165 is pretty good and glad the PCB has underglow LEDs for that sweet RGB. Probably the Iron165 in its best form. GMK Reforged is also so nice.
Geonworks F1-8x V2 with Diamond-polished MX Blacks on Aluminum Plate
Просмотров 4,4 тыс.Год назад
Keyboard: F1-8x V2 Mount: Viton O-ring Gasket Plate: v1.1 Aluminum Switches: Vexkbd Diamond-polished MX Blacks Stabs: TX Stabs Keycaps: GMK Burgundy R3 Deskmat: Tinyland (Autumn) Foams: No foam Ever since Geon announced a v2 of the F1, I sold my original F1 in anticipation. The lower front height and refined case design really drew me in. The two-tone case color for this first drop is also so n...
Satisfaction75 with Stock Pink Robins on PP Plate Sound Test
Просмотров 1,3 тыс.Год назад
Keyboard: Cloud White Satisfaction75 Mount: Burger Mount Plate: Polypropylene (PP) Switches: Stock Pink Robins Stabs: Staebies V1 Keycaps: GMK Demon Sword Deskmat: Busy Town (Rough) Foams: No foam This is probably the best build I've done for the Sat75 and might be the best I'll ever get it. The hollowness is essentially gone, and the sound is in a pretty good spot. The spacebar is hitting nice...
Cannonkeys Chimera65 R1 with Lubed Zakus on PP Plate Sound Test
Просмотров 833Год назад
Keyboard: Chimera65 R1 (Grey/Lilac) Plate: Polypropylene (PP) Mount: Gasket Switches: Lubed Zakus Stabs: TX AP Stabs, Staebies r2.1 on the Spacebar. Keycaps: GMK Thinkcaps Deskmat: Busy Town (Rough) Yeah this build ain't it, chief.
Mode Sonnet (Isolated Top Mount) with Stock Gateron Cream Sodas on Pom Plate Sound Test
Просмотров 1,1 тыс.Год назад
Mode Sonnet (Isolated Top Mount) with Stock Gateron Cream Sodas on Pom Plate Sound Test
Mode Sonnet (Stack Mount) with Stock Gateron Cream Sodas on Alu Plate Sound Test
Просмотров 843Год назад
Mode Sonnet (Stack Mount) with Stock Gateron Cream Sodas on Alu Plate Sound Test
Cannonkeys Chimera65 R1 with Marshmallows on FR4 Plate sound test
Просмотров 592Год назад
Cannonkeys Chimera65 R1 with Marshmallows on FR4 Plate sound test
Mode Sonnet (Stack Mount) with Lubed Broken-in MX Blacks on Alu Plate Sound Test
Просмотров 1,1 тыс.Год назад
Mode Sonnet (Stack Mount) with Lubed Broken-in MX Blacks on Alu Plate Sound Test
Mode Sonnet (Isolated Top Mount) with Lubed Broken-in MX Blacks on Alu Plate Sound Test
Просмотров 1,7 тыс.Год назад
Mode Sonnet (Isolated Top Mount) with Lubed Broken-in MX Blacks on Alu Plate Sound Test
Singa Kohaku with Lubed OP Blacks on Alu Plate Sound Test
Просмотров 2,2 тыс.Год назад
Singa Kohaku with Lubed OP Blacks on Alu Plate Sound Test
Cannonkeys Chimera65 R1 with Diamond-polished MX Blacks on PP Plate sound test
Просмотров 1,9 тыс.Год назад
Cannonkeys Chimera65 R1 with Diamond-polished MX Blacks on PP Plate sound test
Drift Mechanics Forever65 with Broken-in MX Blacks on POM plate Typing Sounds
Просмотров 1,7 тыс.Год назад
Drift Mechanics Forever65 with Broken-in MX Blacks on POM plate Typing Sounds
Drift Mechanics Forever65 with Stock Mode Obscura on CF plate Typing Sounds
Просмотров 619Год назад
Drift Mechanics Forever65 with Stock Mode Obscura on CF plate Typing Sounds
JJW Cloudline with Lubed Vintage MX Blacks on PP plate (O-ring and Top mount) Typing Sounds
Просмотров 1,6 тыс.Год назад
JJW Cloudline with Lubed Vintage MX Blacks on PP plate (O-ring and Top mount) Typing Sounds
JJW Cloudline with Lubed OP Blacks on PP plate (O-ring mount) Typing Sounds
Просмотров 2,1 тыс.Год назад
JJW Cloudline with Lubed OP Blacks on PP plate (O-ring mount) Typing Sounds
TGR x Monokei Jane V2 ME with Lubed OP Blacks on PP Plate (O-ring) Typing Sounds
Просмотров 2,7 тыс.Год назад
TGR x Monokei Jane V2 ME with Lubed OP Blacks on PP Plate (O-ring) Typing Sounds
TGR x Linworks Dolice with Stock Gateron X on Alu Plate Typing Sounds
Просмотров 780Год назад
TGR x Linworks Dolice with Stock Gateron X on Alu Plate Typing Sounds
Jelly Epoch SE (Special Edition) with Lubed Boba U4T on PC Plate Sound Test
Просмотров 866Год назад
Jelly Epoch SE (Special Edition) with Lubed Boba U4T on PC Plate Sound Test
Mode65 with Lubed Lavenders on Pom Plate Sound Test
Просмотров 353Год назад
Mode65 with Lubed Lavenders on Pom Plate Sound Test
dude your room must be big and high ceiling
@@luvtravis yeah the ceiling are pretty high
this video is so awesome- i was really into this board and this vid makes me want it even more!
is the rgb level highest? i wonder you can raise the rgb brightness higher than this level
@@dyaak372 yeah the RGB is at its max level here
RGB!!!!
owns a kc2/65, buys a kalam kc 2/65 just for the love of the game!
@@keyboardstuffkeeb lol i sold that real one a long time ago
jit clackin
return to cherry is on strong atm
Delicious cherry, honestly doesn't sound way different from my stock oranges, so more reason to leave them stock
this sounds fckn nutty!!!
thats like, what the keyboard gurus say, marblee?
I think my last build would fit that description more!
It always circles back to cherry
Been loving my Mode65 board is so easy to tinker with and build. This config sounds really good man! And I am not even a cherry guy lol.
@@RandomKeebs yeah this board is so solid. It has not left my desk at all lol
@@MadCao888 I have been using it as my new switch tester bc it is so easy to rebuild. Remove accent pull 4 screws and then swap plates etc lol. I have already done like 5 builds in it.
@@RandomKeebs Yeah the 4 screws make it so convenient! Do you have a favorite build so far?
@@MadCao888 I could have sworn I replied to this lol. But yeah I did two builds recently on my channel. One with Ghost dragons on Alu and another with Bsun Bunny on Carbon Fiber. Both slap!
Yo my man how to make the pretty lights work? My RGB doesn't seem to work lol.
You need to use VIA to map a key to turn RGB on/off
i came
How does this board compare to other 65s you’ve recorded (or have)?
@@bjp0327 sound signature leans more clacky I think, so I like it better than the chimera65. Compared to the kohaku, personally, I think it sounds almost as good; especially when I had the mx2a orange build
@@MadCao888 better than chimera65, thats high praise. it does seem to be pretty good
New to hobby. How did you get RGB into the case?
@@tys3456 The PCB comes with RGB LEDs. Once you connect it to Via (website where you can remap your keys and set your layers), you can configure what keys to hit to turn it on/off
Sounds really really good my dude. I cannot wait for mine to get here.
@@RandomKeebs thanks man, you're gonna love it
that's some nutty RGB, that isn't the stock PCB is it? also, any chance you'll upload a sound test with the oranges?
It is the stock PCB! I'll probably switch back to them or MX Blacks sometime soon and will upload :)
Damn. This actually sounds a lot fuller than what I expected for HMX. Fire
Same, very surprised by them!
glad to see ure back! (new desk & layout i see 👀)
Work keeping me way too busy, and also falling out of the keyboard hobby :( But yes! I've finally split my work and personal PC on to separate desks :)
busy town spotted
@@polynotgone8349 busy town goated
Does your pp plate have the leaf springs or did you get one without them? I got a pom plate without leaf springs for my kalamcult and the spacebar sounds and feels thud-y
@@thefeel2261 I'd have to open it up and check to know for sure, but I think mine is without the leaf spring too
how does the diamond polished browns feels? is the tactility still there or it just straight up feels like a linear?
Pretty smooth, the tactile bump is still there
@@MadCao888 that is great then i like the sound and how light the tactile bump is, I just not vibing with how scratchy it usually is
@@huymichael5641 Agreed! I hadn't used MX Browns since my old Drop Ctrl Keyboard, so i was pleasantly surprised by these
@@MadCao888 yeah I recently tried some 1 mil broken in mx brown and they are just still so scratchy, so I was hoping that the diamond polish would fix this since I love the sound.
is this the galatea?
Yeah, galatea pcb
Great sounding board! Would’ve copped one If not for that erection emoji lmao
top row sounds hollow?
KC have terrible cnc so they don't anno no more LOL.
Yeah the anodizer they had in the USA just couldn't get consistent quality. A shame tbh.
Great video, what do you think about this compared to the Iron165 Plum?
I've never seen a plum iron in person, so I'm not sure. Both are nice colors. Sound wise though, chimera is vastly better imo
@@MadCao888 so in terms of performance you would say Chimera has more to offer?
@@MuffledSmithers depends on what you're looking for. Iron 165 is a better looking board to some people and vice versa. Sound wise, the chimera wins. They're both keyboards at the end of the day, so whichever you prefer lol
How does it sound compared to the original Keycult one?
I'd have to rebuild with a build I did with the real one to say for sure, but it's pretty similar in sound.
My day is ruined. I need Cherry Mx blacks on the Alu plate, which is TGR Jane tradition or Nixies.
I actually despise cannon keys for putting their ugly ass logo on this otherwise amazing board
lord mercy im boutta....
Ayo lmaoooo
Sounds really nice! Are they linear switches
Yep, they are linears!
First
A shined set is a loved set :- )
ay yooooo that T is shineeeeeeeey
Lmaoooo Burgundy is so good I use it on everything
Is there a big difference in sound for the copper backplate and regular?
I think it helps a little with the hollowness, since makes the bottom a bit more dense. I'm not 100% sure though; I haven't tried this board without forcebreak
The only Kohaku I know is Anba Kohaku
pretty nice, what polish did you use?
Sorry I'm not sure. My friend polished these!
diamond polishing nk creams might be abit overkill unless u have a really fine diamond polish like 0-0.1 micron 200k diamond polish
most people today can’t appreciate this but i sure can, sounds clacky af in the best way possible.
That is one of the best sounds ever on 910 v2 me, where did you get the alu plate? I'd like to get that one!
I took the available plate files and had one custom cut through sendcutsend (USA-based).
@@MadCao888 hi there. where can i find the plate files? how much did it end up costing you?
@@tranmeister you can get the plate file from monokei's website. It cost me about $60 USD
@@MadCao888which plate is your favorite on your 910?! Thinking of picking up extras
@@tranmeister hmm I think I like all the best tbh! 910 ME is a little quiet, so the metal helps imo
I'm having the same setup with you. Which mount do you end up preferring?
I prefer top mount. Spacebar sounds better to me in top mount vs o-ring.
this or the sessantacinque?
Hmm I'd probably choose the 910 since it looks less boring.
yea 910 def better looking, how bout in terms of sound and feel?@@MadCao888
@@mattheww6139 Feel is pretty equivalent if I'm using top mount in the 910. If using o-ring, 910 would probably be better? In terms of sound though, sessantacinque would win.
I love this sound test is this with fr4 pcb or cem3?
Thanks! It's FR4!
@@MadCao888 thanks so much!
based for long poles in korn, but this is nice af
I understand the love for the Korn haha
best board ever @@MadCao888
sounds insane dude
Right? This might be the first mx browns build I like. Moment is just so nice bro
maybe i should try some cherries in my moment this sounds so nice
So nice. I want a moment now lol
damn this board slaps!!!!
Thanks anh oi 🥰
Will a stack mount fix the hollowness/ping?
Yep. I have another video uploaded with stack mount if you want to compare.