Видео

CZ MAKE A 6 shot plus 1 . Short grip . Pocket .

First time I’ve seen an sp-01 with a red dot. Not bad

Such a nice build. Definitely my next buy.

Had this same issue when installing a Surefire comp on a new barrel. Had to trash the entire set up. Luckily it was a cheap barrel.

cool tip. glad i saw this before i ordered

Do you feel shooting wise that the shadow 2 compact is worth the extra money from the p01?

As a disabled veteran who uses a wheelchair, I just want to say how cool that fella in the brown shirt is. Youve got a heart of gold, man💛

I'd rather have muzzle up to my friend's butthole than down to me peepee

Johnson Daniel Miller Karen Davis Nancy

Walker Thomas Davis Scott Rodriguez Kenneth

She’s is beautiful

So nice & compact

Red dot on a pistol? Lgbt approved

Really great info, thanks. I’ve put on and taken off a ton of muzzle devices and I’m really surprised this hasn’t happened to me. I’ll definitely try to be aware of the type of threads I’m working with from now on.

Nice job. I hope to get there

i put those same grips on my p01 and S2, just in black. they make a huge difference

Never was a fan of rock set or any other glue on barrel threads. I’ve galled a couple myself. I’m a big fan of using anti seize. You can buy that at the auto parts store.

Garcia Anthony Harris Timothy Lee Elizabeth

I just had to do the same removal technique...bouthgt a geissele upper from a local guy an he had threadlocked the muzzle brake on while i wanted to use surefires 3 prong for their suppresser...im glad it handt fully set as i put near 150 ft lbs to remove it...am a mechanic by hobby or i may not have had the strength to remove it...proper torque works just fine

Great Video..Thank you..

Question, who did the optic cut for that plate?

Galling happens all the time if your male and female threads don't have enough clearance (class of threads) AND both materials are the same type & grades of steel. Stainless is the worst at galling. (titanium is just as bad) In this instance you needed the proper anti seize on the threads. For very high temps use NICKEL based anti-seize. About 25 years ago I threaded a stainless barrel for a A2 flash hider, using the flash hider as a "gauge" for fitting the threads and a single point threading tool in my lathe. Later the owner of the barrel screwed on a AAC Ranger stainless suppressor that galled. We had to use a hydraulic press to hold the barrel and when removing the suppressor it ripped the threaded end right off the barrel. Had to bore out the suppressor to remove the end of the barrel and internally re-thread it, but it worked. ALWAYS USE ANTI-SEIZE on stainless vs stainless. Iv'e installed many suppressor brakes. If it's properly torqued it won't loosen off. No need for Rocksett as most customers come back later and want the mount removed and installed on a different weapon.

Do they offer a barrel for it

Are the thin boggies the same thinness as the shadow 2? I just ordered the thin boggies for my cz omega? Does anybody know?

I bet he would have 0 recoil if he put his hand over the muzzle

Radical improvement.

Nice 👍 tip thanks

Such a stupid video

Turning a 600 dollar gun into an 1800 dollar gun. Not counting the Trijicon.

great video! but hey definitely invest in a bluetooth mic. I will be subscribing regardless

Soft stainless steel has low Charpy strength (corner strength). threads are nothing but a bunch of corners. 300 series stainless and non-hardened 400 series stainless is known to gull in the threads. at works I specify stainless parts with threads to be hardened, this prevents the gulling. It is possible the barrel material or the attachment were softer materials basically below 35-40 Rockwell C in the threads. 416 barrel steel is usually 35 Rockwell C and up. If you drop that attachment on the concrete and it dents, that means its soft. it is is not damaged then the barrel is soft. in order to start the gulling process the stainless needs to have micro fractures from friction in the surface and the fractures open up and the material from one of the components enters those fractures, and boom you have gulled the threads. if the material is hard enough it will not fracture from friction. I suggest using pipe tape for a grease free barrier. I have messed up printed call out on 2 and 3 classes of threads with littles issues in stainless. class 3 has the tightest fit and class 1 has the loosest fit for perspective with class 2 being the standard fit.

Sorry. I don’t get it. But since I’m not a fan of lights and red dot sights, and stock triggers are fine by me, I guess it’s not surprising…love the gun. Would like to feel the grips. They look great. But it would be a sad place to live if we all liked the same thing.

EXCELLENT FUNDAMENTALS!!!!

THAT'S EFFICIENCY FOR SURE

You make it look so effortless. You know a man is good at his craft when he makes doing something look easy.

Stay Ready So You Don't Have To Get Ready

Just Came Up On My Timeline. Great Video.

Why do people buy these in 5.56?

This is my next purchase!

I’m just letting people know. The shit isn’t gonna work now because of that orange paper insert that they put in the muzzle device package saying he uses class three threads that you don’t want to use a different class 3B3 whatever class two whatever type of thread

That really sucks once all the said and done, the barrel itself is 1000 bucks Now be aware your fire on their most recent muzzled devices have an orange Paper that tells you the class of threads that will work with it and do not use it with that because they’re not gonna be liable as does a company that makes your hundred dollar muzzle delays thousand dollar suppressor but they wanna lose $1000 every time someone takes a chunk of threads out of the barrel course not so companies of getting even high end companies they’ve been getting very very like where they used to be like oh we could do that for you no problem or let me check. We might actually have some MK 13 hangover still are not the same as they used to be

I have almost the exact same set up on my SP-01. Same colors and everything except I went with a EPS Carry optic and a TLR-1HL. That pro package is awesome.

Thanks, there are few videos out there as thoroughly informative. Kudos !!!

Fcd makes the best saftey selector on the market. But having purchased 2 I don’t know if the upgrade is worth the price increase

What's the price of that setup?

I had to replace the hammer spring with a good one cause the blue kept having light primer strikes

what the distance?

Any mounts compatible with Holosun HM3X?

Nice piece, random but your voice tells me that you can make some good ribs 😂

Yes but this is gunsmithing. Isn’t it? There are licensing requirements for that right? Does that impact things like drop safety? I loved the explanation about the functioning of the gun. Hard to find on the internet in such a clear fashion. I have a Shadow 2 since May, shot probably less than 500 rounds through it, so mmmh mine will stay stock for quite some time! 😊