Видео

Being watching this build from the beginning, coming along nicely, well done

Wow that is a lot of hours. I don't have the patience for all that. Looks great though!

dope series

Thank you for your help

Thanks!

Jesus christ what did the previous owner use to make that hole the power cable is running through, a shotgun? Has it worn through the cable insulation yet?

Can you help me? I'm trying to cash out my Toad of coinbase wallet

Dude amazing video! Thank you so much.

What lbs/pound air bags have you used? 2500?

What is the part number for the cable? Is it a dealer item only? My driver side door cable snapped.

Hello, my renegade is a real pain. Last summer I replaced my whole engine and in the process I decided to go with a single mass flywheel and clutch Masters clutch and at the beginning it worked pretty good I also did the delete. But over the year I've noticed the clutch not engaging very well so I went through and built my own motor mount so they're really stiff now the clutch doesn't work at all. I mean you can't get it to disengage anything and what's really strange is you can hear the slave moving when someone's applying the clutch so I don't know what's going on. What's interesting to me is there's actually a valve to bleed your clutch system from but you can't do anything with that if you got to unclip the fluid line to get fluid running out to me as a dumb idea they should have had a valve that you can unbolt to release the fluid which now I'm having a struggle getting that clip out

I was reay hoping for more of a vudeo for the cylinder head for the beetle. Any tips on getting the cylinder head off from ezhaust onn02 beetle turbo?

Good job!!!!!

pkease show final progress

This is absolutely amazing! I cannot wait to see this thing go. You are an absolute genius!

Good luck man im working on my 96 impala to keep it alive 😅

Nice job, but why couldn't you just use air shocks?

Is this a new 2.7T swap? A couple of days ago I rode in a friend's 2.8 that he swapped ecms and added turbos. Everyone I know of says you can't do that but his was crazy fast with no hickups. He might not have told me the whole story but I really liked how fast it was.

This is encouraging, I want to convert my veloster as well. You got a new sub!

Put a Pivot Point on the bottom air bag

my dream car

What is that exhaust and intake u said i-1 i-2 and so on and e-1 and e-2 so on my brother accidentally deop those and it all came out i need help on its right place :( 22:47 Pls help

What about Awd?

Is this possible to replace head gasket without taking the engine out?

Man, 15years? Don't feel bad I got a cadillac in 2000. It ran less than a year before I completely started to rebuild the car. It hasn't run in 24 years and has been moved on a trailer four times to four different homes. You've got plenty of time to finish the Impala. Check out Harbour Freights car enclosures for $150. They don't last very long but they save a lot of damage on cars that sit for long periods.

Just did my XJ trans took 12 hour straight mostly trying to get top bell housing bolts Then sticking it back in took forever Got a Audi b6 1.8t last week Clutch went today, my luck. Nervous about it fighting to go back in, anybody got any tips

I have a 04 Beetle turbo auto and the engine blew the head gasket. . This good detailed video just made my day. :)

19:28 headliner

Did you disconnect the battery before unhooking the seat safety connections?

I need to up the tension on my sunroof shade. Do you know if there's a way to do that? Literally no information on it

If you had wanted to keep the G4FJ engine, and instead only go for a AWD swap, do you think you could have made it work with the Veloster’s floor pan? Maybe by cutting, but not as much as it would have taken to make room for the Genesis transmission? I have a 2014 Turbo R Spec and I desperately want to AWD swap it with a fully mechanical automatic torque balancing front/center/rear diff set up. I’ve been building up my skill set to prepare, but… ooof. That full on double floor pan cut out, trim, and re-weld is too much for me. Like, your playlist has got me researching drag bike chains and other half brained ideas cus I do not want to do that full floor swap.

I was gonna mention the wide body fender kits that are available, but then you said you were doing it literally as I was typing 😂

It helped me!

What’chu mean you only got beds and a TV? I seem to recall you took 4 seats out that Genesis. Weld some legs onto them and boom, house furnished.

Thank you for your video. Now know much better about interior of my 2017 rav4.

I cannot thank you enough for this detailed video. I'm getting a B6 A4 shortly from a friend and this is one of the mods I was looking to do. Saving this video for later.

Thanks dude, super helpful

3:10 what was that noise? Did you knock over your beer? That noise is my break bell. When its empty enough to fall over I go get another. Wiring looks great! Should last years.

keep up the good work!

That poor car! She was rode hard and put away wet. Whole lotta restoration needed.

Damn, good for you that you do electrical. I hate electrical. I have a box of roach clips that I use as third hands so that I don't burn my fingers when soldering but I still can't stand doing it.

On my 2018 RAV4 it doesn’t have a ON/OFF switch to turn off the passengers airbag, or rather I can’t find it. Do you know where it’s located or does a person interface with the “maintenance” section using the steering wheel control(like how I reset the oil change service reminder when I do an oil change)? If there isn’t a switch to turn off the passengers airbag, then I plan on disconnecting the 4th connector for the seat bottom bladder(I think that is what you called it) that measures the weight of the passenger…Do you think this is a good idea. In summary, I simply want to disable/turn off my passenger airbag. Thanks in-advance for your reply.

At least you remembered before getting the car all back together and then leaving a giant oil slick under the car. Ive done that more times than I can remember.

Man I cant even explain how happy I am to see this video! My trunk was going on and off for the passed 2 days, I pushed abit to hard on it thinking it was stuck and the fking thing popped up into my door and now the only way to open it is with the inner latch.. I thought I was gonna have to replace the door or pay someone 100$+ to fix it. Youve just saved me loads of time and money with this easy fix 😁 However I'm now wondering if this isnt a factory issue and there probably should be a factory recall to have this issue fixed. If you've had to replace it 6 times now, Im definitely gonna order and extra one for emergencies 😂

I wish I had your knowledge! This things going to be awesome

Why did you have to replace the cylinder head bolts ?

How did u take out the gas without losing air pressure to the gas tank and mines doin the same thing where it has aweak start ithought it might of been gasket because of lose of pressure in engine...help!

You’re my new best friend!

Thanks for the update. I enjoy following this project.

Do you have the video how you fix it?