Thank you so much for making this video! I found the exact same magnets at O'Reilly Auto Parts and this fixed my brake lights staying on. This saved me a ton of money on parts, a possible ticket, and even potentially from getting rear-ended.
Thanks, Marlon, for posting this "how to" video. It helped me immensely in understanding how to solve the issue of my brake lights being stuck on. I was about to buy a brake light switch until I saw your video. I solved my issue a little differently by using a small "plastic panel push pin" instead of the magnet. Nonetheless, you got me headed in the right direction, thanks.
Thanks a million for posting this video. Went out to the truck and the pieces were on the floor sure enough. Already had some magnets in the shop and that fixed the problem. Took less time than watching the video and saved me hours of trouble shooting. Right on.
You are a genius. I spent over $60 on a brake pedal switch, light bulbs, and fuses trying to track this down. I laughed when I saw that broken plastic piece on your floor, because that's exactly what happened with mine! Thanks for sharing.
My dash lit up like a Christmas tree. Service advanced trac, check brake system, check emergency brake… all in the middle of a 1000m+ road trip. Just found the little bumper on my floor. Hope this fixes it!
It flipping works!!! I had the silicone spacer on my mat. Sure as hell my brake lights were on. I have a 2014 f350, one owner, me. This happened today 7-9-2024.
Took me a bit to see where you were referring too, but I found the little half a piece of plastic on my floorboard, couldn’t find a magnet, so I got a little plastic washer the size of the one that fell off, super glue and bam! Brakes lights went off, now, I have read the blue switch is a safety switch and could affect the performance of your vehicle. Mine bogged down like it lost power so I guess I’ll eventually have to replace the blue part, but it’s like $60 so we will let it ride for now. Excellent idea, Screw the stealership as they want $300 to fix it. .05 cent washer and $2 super glue and seems good to go. Thank you kind sir
Thank you!!! You just saved me a ton $$$. After viewing your video I went back to the truck and low and behold the gasket was on the floor board. Magnets are working!
Wish i saw earlier this would totally work. I ended up super gluing a dime to some felt then put some glue on the other side, rolled up a little tape on index finger, stuck the dime side on my finger, depressed pedal and got it in there kept it there for a bit for the glue to cure. Then slow wiggled my finger to get the tape off. We shall see how permanent it is. If it fails this will work lol
Wow - best tip for my truck so far - came home after work and my brake lights we on when I shut down the F250. Found your video, looked on the floorboard, sure enough - there was a plastic disc that fell out of place. Used a magnet. Viola!
That was totally the issue. Why in the world did the engineers design something this ridiculous, and a little plastic stopper would cause this much headache. Thanks again, Marlon.
Thanks bro you just saved me a big headache and I did use a magnet that I pried off the back of a flashlight until I can get down there and get the right ones but that did work have a great day and thank you for this video
My Brother, noticed this tonight on my F350 and Man bro your solution worked like a charm, I had a perfect magnet for this! Genius, thanks for saving me as well as all these folks!
Thank you very much for sharing this-this is incredibly helpful. Went and bought the magnets after I saw this video. Took me a few seconds to install works like a charm. Thank you for saving me time and money from the dealership
1000% thank you! I'd love to say you saved me some money but I bought two aftermarket and one OEM brake switch before realizng this was all it was. And of course the OEM one (most expensive) has a zero return policy. None-the-less, I appreciate the video man. Appreciate you for making it. Thank you.
Got the same problem but also Truck will not accelerate. Then service brake light warning nd advance track all come on. I hqve the magnets. Just need to install. Will update when complete.
Thank you so much for making this video! I found the exact same magnets at O'Reilly Auto Parts and this fixed my brake lights staying on. This saved me a ton of money on parts, a possible ticket, and even potentially from getting rear-ended.
2025 listeners Welcome to the Zamar Experience ❤
❤
Love this group❤❤❤
Still listening 2024😍
Yes, me too. Praise Jesus! Worship him eternally!!
Yes yes!
Outstanding video and recommendation. Your solution worked great...step by step..from purchase of the specific magnets from HD. THANK YOU!!!
Thanks, Marlon, for posting this "how to" video. It helped me immensely in understanding how to solve the issue of my brake lights being stuck on. I was about to buy a brake light switch until I saw your video. I solved my issue a little differently by using a small "plastic panel push pin" instead of the magnet. Nonetheless, you got me headed in the right direction, thanks.
So where do I Venmo you lmao been freaking me out all day then stumbled on this. Made ME feel like a G!!
The same thing happened, go to Ford. Part number MR3Z-7583-A It's a recall part of the Ford Mustang fits right in and works. 3.00 dallars
Great video brother.
100%
Thanks a million for posting this video. Went out to the truck and the pieces were on the floor sure enough. Already had some magnets in the shop and that fixed the problem. Took less time than watching the video and saved me hours of trouble shooting. Right on.
This video just save my a$$ from spending money and headache thank you my brother 🙏 your my hero ❤
This man deserves a medal
You are a genius. I spent over $60 on a brake pedal switch, light bulbs, and fuses trying to track this down. I laughed when I saw that broken plastic piece on your floor, because that's exactly what happened with mine! Thanks for sharing.
My dash lit up like a Christmas tree. Service advanced trac, check brake system, check emergency brake… all in the middle of a 1000m+ road trip. Just found the little bumper on my floor. Hope this fixes it!
Wow just tried this…Truly a great video. Thank you for sharing and saving everyone a ton of money
This video saved me so much money it’s insane. Thank you so much for posting this.
It flipping works!!! I had the silicone spacer on my mat. Sure as hell my brake lights were on. I have a 2014 f350, one owner, me. This happened today 7-9-2024.
You the man
Awesome fix!!! Well done sir!
How did we survive without RUclips tutorials like this??? lol this is the BEST fix for something that would have easily cost hundreds at a dealership.
Took me a bit to see where you were referring too, but I found the little half a piece of plastic on my floorboard, couldn’t find a magnet, so I got a little plastic washer the size of the one that fell off, super glue and bam! Brakes lights went off, now, I have read the blue switch is a safety switch and could affect the performance of your vehicle. Mine bogged down like it lost power so I guess I’ll eventually have to replace the blue part, but it’s like $60 so we will let it ride for now. Excellent idea, Screw the stealership as they want $300 to fix it. .05 cent washer and $2 super glue and seems good to go. Thank you kind sir
Thank you!!! You just saved me a ton $$$. After viewing your video I went back to the truck and low and behold the gasket was on the floor board. Magnets are working!
It may be good but I can’t tell where this is located.
I like the video that you made in fact, I have the exact problem but how did you get the magnet up in there to start with? Can you help me out?
Wish i saw earlier this would totally work. I ended up super gluing a dime to some felt then put some glue on the other side, rolled up a little tape on index finger, stuck the dime side on my finger, depressed pedal and got it in there kept it there for a bit for the glue to cure. Then slow wiggled my finger to get the tape off. We shall see how permanent it is. If it fails this will work lol
1 Thess. 5:17-"Pray without ceasing." God be glorified! Amen.
Just had the same problem and your video helped me fix it. These are the types of videos I consider valuable.
Amen
Thanks! your video saved me a bunch of cash and aggrivation.. Spot on and to the point. Great job! Also had an extra fridge magnet, thanks BradyW84
You're a genius F those little stops. Even if you have a new one they are a pain to put in. Stopping at home depot in the morning. Thank ya sir
You the man! Thank you soooo much for the help!!
never comment on youtube videos but this was so spot on down to the tiny piece i found on the floorboard. thank you so much!
God Bless you!!! Lights wouldn’t go off, then all kinds of sense lights were going off! Used the exact same magnets you used, cured it all!
Wow - best tip for my truck so far - came home after work and my brake lights we on when I shut down the F250. Found your video, looked on the floorboard, sure enough - there was a plastic disc that fell out of place. Used a magnet. Viola!
Thanks for the video. This was my problem..
Worked like a champ! Thanks for posting this video
My mechanic suggested to put something under the brake to turn off the light
That was totally the issue. Why in the world did the engineers design something this ridiculous, and a little plastic stopper would cause this much headache. Thanks again, Marlon.
Absolutely thank you
Thanks bro you just saved me a big headache and I did use a magnet that I pried off the back of a flashlight until I can get down there and get the right ones but that did work have a great day and thank you for this video
My Brother, noticed this tonight on my F350 and Man bro your solution worked like a charm, I had a perfect magnet for this! Genius, thanks for saving me as well as all these folks!
Thank you very much for sharing this-this is incredibly helpful. Went and bought the magnets after I saw this video. Took me a few seconds to install works like a charm. Thank you for saving me time and money from the dealership
Amazing! Worked like a charm. I had the same piece on my floor mat and the magnets in the garage. Thanks for posting this!
This video is outstanding. The fix was exactly as the video explained. Thanks for the help.
1000% thank you! I'd love to say you saved me some money but I bought two aftermarket and one OEM brake switch before realizng this was all it was. And of course the OEM one (most expensive) has a zero return policy. None-the-less, I appreciate the video man. Appreciate you for making it. Thank you.
Yassss 🙌🏾🙌🏾🙌🏾🙌🏾
Got the same problem but also Truck will not accelerate. Then service brake light warning nd advance track all come on. I hqve the magnets. Just need to install. Will update when complete.
Was wondering what this was on my floor mat, an identical piece to yours, thank you for sharing this, as mine started yesterday.