Видео

When referring to the size chart, if you’re in between sizes I recommend you size down as the gloves will stretch as you wear them. Hope that helps!

Yess, they sure will! Thanks for your comment.

@@motokasaki thank you so much

Hi, thanks for your reply, I checked with K-Speed customer support , they told me this Footpegs is compatible for 2016-2019, it can not be installed in 2023

If you’re looking at the right ones it should be the same as what I have in the video. My rebel 500 is 2023 so I’m sure it works 😂

@@motokasaki thanks, I will check once again.

Hey there, 1” bar grips should do the job :) Thanks for your comment!

I’m not sure my friend, thanks for your comment though :)

From ali express. Thanks for your comment. :)

I used the old handlebars to measure the distance of the holes and just used a drill bit that was the same as the stock holes. Hope this helped :)

Thanks for your support!

Sorry my friend, I don’t have this bike anymore, I’m sure if you search woodcraft clip on installation videos, you will find it. Thanks for your comment!

Here’s the one I use: amzn.asia/d/5fiSHEX Hope that helps, thanks for your comment! :)

Apart from the design, they are the exact same thing. Hope this helped, thanks for your comment!

@@motokasaki def does. Did you prefer them over the stick pegs with no rubber on them? Debating getting the AliExpress pair

I just prefer the styling of the Diablo ones, but the aliexpress ones were just as good. :)

Please have a look at my other video which shows you how to install bar end mirrors :) Thanks for your comment!

@@motokasaki Thank you!

I did not unfortunately, Only have worn double D closure helmets.

Not these exact ones i don’t think. I’d have a look at their website under the Rebel 1100 Tab. Thanks for your comment!

Thank you Sexy 😉

Granted they have 1 inch bars, they should do. Thanks for your comment!

Its really depends on the type of bars and how you are planning on routing the lines. Perhaps you will have to, perhaps not. :)

Thanks for your comment! Woodcraft clip-ons are 12” in length. :D

K-Speed is the original manufacturer of these parts and assures the highest quality. Any other unbranded part that looks similar is a knock off and terrible quality. I wouldn’t buy anything like these parts off ali express. I’m very happy with the quality of diablo parts. Hope that helped, Thanks for your comment :D

Thank you! That does help bc I am about ready to buy a bunch of stuff from them but nobody is specifically talking about quality in the parts. Just the looks. It had me wondering.

My pleasure. Yeah you can definitely feel the difference between the parts K-Speed makes and the knock-offs. The cheapie Chinese ones don’t even come close.

From aliexpress, i’m sure it will come up if you search something like rebel 500 leather tank pad :)

Glad it helped. Thanks for the comment :)

Thanks for your comment <3

It is just a generic chinese one, i’m sure you can find it on aliexpress or ebay. Just search up Ninja 300 Gear indicator and pick whichever colour you like :) Thanks for your comment

But they are so cute.

Hey mate, thanks for your comment. I used just a generic license plate mount that you can get from ebay or ali express. But I made the extension arm myself. Hope this helped :)

Thank you for the kind words my friend :) I appreciate you

Absolutley!

Haha!

Hey there, I’m sure they are accessible worldwide. There are many people in USA with these exact parts also so you shouldn’t have any issues :) Hope that helped.

Hi Pat, Thanks for you comment. As I said in my video, yes it will work on a 2023 model but you will need to buy an additional item: The Electrical Relay, and install it under your tank. I left more info in the description of the video. Hope this helped!

It’s very personal, I used it only for aesthetic purposes.

Hmm… Seems very strange. Its a universal socket so I don’t see why it wouldn’t work. Do you mean theres just a bit sticking out? That is normal if the adaptor is just tall, then I suggest a shorter one. Otherwise I’m not sure what you mean. If you provide further details I may be of assistance.

KSpeed is a Thai company but they have outlets in different countries, one of which is Japan. But all the parts are manufactured in Thailand. Hope this helped. Thanks for your comment

Hey, yeah thats right. It is plastic

Hey brother, thanks for you comment! The stock handlebars are quite thick and that is probably why you’re having a hard time. However, the stock handlebars that are oem to the bike already should have holes. Which bar are you using?

The original stock OEM handle bars of 2020 Rebel.

Ahh, I just realised you are talking about the installation for the bar-end mirrors and not the handlebars (I made another video on handlebars). You should be able to drill holes but It will be more difficult. I cannot help you with that because to be honest I don’t have a lot of experience with drilling. All I can say is make sure you are using a proper drill bit for metal. But I suggest getting different handlebars as they already have holes on the end and will fit the mirrors perfectly as if you do it yourself there may be some error

Thanks mate appreciated!

@@anshulp7 Hi man! Were you able to solve this problem? Im in the same situation as you right now...

Nice man, I loved my ninja. Definitely lots of cool things you can mod it with. Thanks for your comment!

I love bike

@@motokasaki It already has some cosmetic damage to the fairings, few nicks and scratches. I'm learning how to ride so I might wait a few months before I fix the fairings. They'll probably be expensive too. Are yours gloss black or standard?

Yeah, good idea. They are matte black

Very, ahahhah. They had you leaning in and extending your arms too far for my liking. Thanks for your comment!

Hey there, Thanks for you comment! With the set up shown in the video, full lock does not touch the tank in any way.

Hey man, thanks for your comment! Here’s the link: www.ebay.com.au/itm/154534252903?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=a23WaE7BQEG&sssrc=4429486&ssuid=27ugylxcr-c&var=454611546595&widget_ver=artemis&media=COPY

Thanks for you comment! Glad I could help.

Thank you for your comment! That definitely would have been a smarter engineering choice. Not sure why they didn’t think of that haha.

Hey there, thanks for you comment! I am not sure what you mean, the licence plate holder on my bike is stock so I haven’t changed it out. Also I am riding a rebel 500 now, the kawi was fantastic but I wanted a change of style.

@@motokasaki That makes a lot of sense actually. I bought my 300 used and there was already some modifications to it so I'm guessing the guy took off the stock license plate holder. Thanks anyway!

Sorry I wasn’t able to help, hope you find what you are looking for!

Thanks for you comment! The only points touching the tank are the adhesives and foam so there will not be any scratches. Most likely the adhesive will leave behind some residue but that can really easily be removed with brake cleaner.

@motokasaki Thanks a lot. I'm planning to buy K Speed mod for my cmx 500.

Awesome man! They are really great stuff, what are you planning on getting for it? Keep me updated :D@@dlc556

@@motokasaki tank, side pocket, under Cowl, Radiator, engine and wheel cover set.

Nice man, got the whole shabang going. I’m going to be getting a front fairing soon as well for my rebel, should look tight. Wheel covers should be awesome bro.

The handlebar has a different tilt than the oem one, so you are reaching a bit further to get to the grips if you know what I mean. In terms of length its pretty much the same or maybe only a cm longer or so. Hope this helped!

Hey man, thank you very much! :D Heres the link: www.ebay.com.au/itm/285251349678?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=WQb2fpwFRjq&sssrc=4429486&ssuid=27ugylxcr-c&var=&widget_ver=artemis&media=COPY