Видео

$15.99 bottle of standard Sunlu resin. 103 Tomb Kings models including the huge living statue, 20 cavalry , 6 chariots, upsizied giant scorpion, casket of souls, 5 leader characters, 3 carrion birds. Sixteen bucks ! Yes, you can find total and exact gw models scans .... for free... online... and print them pout

G'day m8...i was on OIASS Dicord and was chatting to Nates Minitures and told him im looking for local YTbers to sub and share all of them on my socials. Because locals can give the best knowledge for locals looking at getting /or already started in Printing an Painting resin prints. big part is getting the tools we need an substitutes. So instead of getting their lists from Nth America or EU, i want to share locals who will showcase their skills and fails for others who fall in the same boat,,,, just subbed So big Cheers and good luck From A M8 Downunder🙃.......Queensland to be precise😎

Good afternoon. Can you tell me why when you click on the model to print , on the printer,Creality ld 002r, the error is displayed: The cutout does not correspond to the projected -1440 resolution?

You can get an industrial scanner but they cost any where from 2k all the way up to like 130k

It is so important to wear gloves while handling the build plate and FEP. The resin stays in the grooves and could still get on your skin without your knowledge.

Wrong on almost every single point. My formlabs is easy to use and produces details GW couldn't even dream about

I love ABS like but in some cases is just tooo flexible

Just going to point out youd need one hell of a mask to stop solvent fumes! Dont waste your time and money looking stupid here! If your just doing a few open a window/door and once its out of the wash just leave it to dry and go to annother room. If your doing this professionally then consider fume extraction.

I almost exclusively use water washable resin for the last 3 years, here is what i have for anyone who thinks they want it. The details are better than other resin's, it flows smoother and doesn't separate so i have left resin in my printer for months and just started a print up one day and came out fine, use a raft the parts are brittle till cured and if over cured, it doesn't have much of a smell and i can use it in a room im in with just a box fan keeping air moving. Happy printing

0 dislikes, what a chad

0:02 it's not a mistake. you're just a pig.

How to connect firmware to pendrive

One of my biggest fails was when I first bought my Mars 2 Pro. I spent 2 days changing printer settings before eventually realizing I never removed the plastic from the FEP film. Second biggest fail would be the number of times I've forgoten to even put the build plate back on when cranking out back to back to back prints. #8 Was hilariously applicable to me. I very much fall into the camp of having "files of shame". There's just so many models, toys, and tools that I'd LOVE to bring to life!

8:45 It happened to me twice in a row.. 😅 I stoped the print and cleaned the plate, put the plate on the place while cleaning other areas and forgot to lock it again 😅

Hi! Is it compatible with ELEGOO Jupiter 6K?

Or, what they didn't want to tell you because it makes their scanner look crap, openscan!!! Brilliant open source scanner that will give you great scan results for around $400 aud haha

Thanks for the Great video. Could you share the cut settings you used to get the best cuts in the 3mm MDF?

As for "it isn't just plug and play" I got lucky and everything worked perfectly, once I did forget to tighten the build plate, but that's about the only problem I've had so far 40+ pieces in

My favourite so far (after a week) is forgetting to secure the VAT! Came back to the printer after a half-hour print to find the build plate lifted to the"finished" position, with the vat still attached to the plate! 🤪

Whats that model at the start of the video that looks like a samuari in power armor?

Distillation is not inherently dangerous, but you need to have some sensible precautions and procedures in place. I've been using a cheap the water distiller to reclaim IPA and it works perfectly- the IPA comes out absolutely clear. Set up your distiller outdoors and away from structures and make sure that it's well sealed. You may need to use some sealing tape around the distiller head to ensure a good seal. Other than that just set it up, let it run, and you'll end up with crystal clear IPA. With that said, I recommend people use whatever method they're comfortable with and whatever works for them.

where did you get the troopaz?

Do you need to re-level the build plate after every print?

Why resin was sticked on my lcd screen.

I think if you want a swarm army, 3d printing is going to be better, but if you care about how each model looks and big models, then buying is better

yes, station forge has pretty nice orks!

mrmodulorka, mekka miniatures, bluesky was good but now doing the pirate stuff, and the omes who stopped because they got games workshop claim

A few things that works for me. First I do not clean the supports as it just gets your IPA dirty faster. Second I use 2 baths of IPA prior to the wash and cure station, you will have just one really dirty IPA to clean often and the other ones can be used over a longer period of time. Third, to clean the dirty IPA, I expose it to UV over a long period of time in a closed container (a bottle is fine), then I filter it through a kitchen towel, why? because the coffee filters are too thin and gets clogged so fast... The advantage of the towel is that, when all the liquid goes through, it leaves this gewy slimy residue that you can squeeze to get as much IPA as possible out. It leaves a solid cured plastic on the towel. Let it dry and you can remove it in one bloc so the towel can be reused again. Then you can filter it with the coffee filter, it will be way way faster :)

Mistake #1 : buying a resin 3D printer

on a serious note the ipa would be worse than the actual resin 3d printer's smell. like fume wise i would be better off connecting ducting and an inline fan for my ipa container than my resin 3d printer 😭

Love it. Made sure not to mess up that one. Earned my sub

Hi, man! Question: u use for black linening also speed paint grim black, or any other paint?)

I didn't watch this video, and def one to include is NOT USING METAL TOOLS IN YOUR FEP!!!!! Learned this one the hard way...

Fellow Aussie here, yeah I've just found out printing in winter sucks. Where I am it's like 0°c or lower, during the day it's around 8-12°c glad it's something like the weather that's the reason for failed prints today, unfortunately I don't like the idea of a 12+ print going in winter even with a heater going.

this was a bad video, but hopefully he learns if making more....first 1 year ago, resin is already sky rocketing in peoples favorite way of 3d prints....second you only said negative more or less negative things about resin and positives about fdm, you forgot the negatives of fdm,.....anyhow...

Every print takes me 2 hours. I have zero idea where to start. So i tryed tons of exposures... I am doing this for more than a week and I am still trying! How cool it was if people could get a list of there printer and the resin they are using. And no, there are no lists for my printer/resin, i looked everywhere.

its more optimal when you don't need a resistor. I got 12v 405nm UV LED's from amazon. If your power source is 12v you don't need a resistor. I have a DC splitter for a 12v power supply that powers 9 of these LED's that I stick into my models.

Great tips,I just followed number 7... :)

When I'm working on my cars, my rule is to never put a bolt in place unless I'm going to tighten it. Use the same rule for your build plate and you won't ever leave it loose.

Hello, just start using the water washable resign and would like to hear your recommendations. What primer is better to use for this resign , what paint & protected coating?

That cartoony color scheme is actually so cool, if you ever get some tankbustas you should totally have them shooting their rockets and have some cartoony flashy sound effects like “Kaboom!” Coming off of them

Dude sounds just like Major kill.

Blue sky minis all the way. Best Orks in da biz!

Great video, thanks! I tried cleaning my IPA tank along the same lines the other day, it didn't go very well as I didn't think about the resin curing as I was doing it - now I've actually watched your video I'll give it another go. Coffee filters and big funnels - top tips 😁

Good set of advices

Mistake number one - do not read the instructions for the device!

Hi where can i get those 3d models?

I'm considering starting 3D printing and this video's a big help. Forewarned and all that. Thank you. Subscribed )O(

You forgot to mention an important one. Dont drink the resin. It doesn't taste very nice.

You need to point out that each resin change means finding the right settings again. It may sound like fun changing resins each print, but this is a huge paint. Cleansing the vat takes time, but failed prints inevitably damage the FEP. Tuning the printer for a resin often ends with failed prints. Another one is printer cleaning. The resin is pretty nasty and light inevitability makes cleanup difficult. Also point out humidity Amd temperatures effect printing so working to keep these constant is a key to success.