Видео

No link in description

😂😂😂

How much is the program I need this for part building plumbing groundwork Illuminate dig out plumb Done

You are out here saving lives brother!

jesus christ those pigtails loose as fuck

I'm not completely positive, but it looks to me like those are compression couplings, which would indicate EMT and not rigid conduit.

The first knot is actually a girth hitch, but great instructional clip overall.

Facing the front of the washer, the left pump seems to fail often. Why is that? Should we replace the other pump as well?

You dont subtract/add anything?

dog bless you ty!

I have an ox and although the sharpener is in a better location, it needs to be tapped/cleared out mulitiple times per sharpen. Negating its preferable location.

I appreciate you my brotha ! 🙏🏽

Bro these Click baits... Everyone knows that this is garbage.....

❤ this is really sweet

Lee John Robinson Donald Martin Larry

I've pulled miles of 500 mcm wire, many parallels, through 4 and 6 inch conduit over the years using the half hitch. Never had a failure to pull, quik and easy .

Anderson Deborah White Brian Perez George

Thanks for the vid, J.

Wilson George Thompson Sharon Moore Elizabeth

Martin Donald Thomas Christopher Lewis Richard

Thomas Steven Williams Michelle Williams George

Brown Paul Young Laura Perez Nancy

What are those purple levels and where can I get one? They’re sick!

Harris Angela Lewis Frank Thompson Donna

Not all heroes wear capes . Thank you !

Lewis Thomas White Carol Martin Jason

White John Robinson Robert Jackson Christopher

Johnson Matthew Anderson Sharon Thomas George

Clark Mary Garcia Larry Perez Karen

What size is that

Weigh 140 can’t do it I always need help

Anyone else watching this, it isn't necessary to disassemble the entire machine. Just tip it back, prop it up, and take it out through the bottom of the machine. It'll save you probably an hour taking it apart and putting it back together.

if the top of the wire is not cut off how are you going to get the tool off?

Super sir Ji 😊😊 TV blinking ruclips.net/video/yJOPDNvzSpM/видео.html

Thanks for this. Just replaced my drain pump and good to go.

Is that happening because there is an exposed wire that is circulating power through the steel plates? Be careful

Damn, to your forearm. I do thumb to pinky.

Bend with you foot to avoid dog legs especially box offsets. Looking down the pipe hoping it’s straight is how the doglegs happen. If you bend with your foot the first bend will face straight down easier to see it straight down then looking down the pipe. I’m just giving my opinion for first timers.

Thanks for the content, I wanted an electricians review before I pulled the trigger.

Thank you man quick question those three dc connectors at the bottom what are those connected to?

Very handsome look on Klein linesman plier

Just ordered it!!

The diode check is always the first thing to be done because shorts on the input side or sometimes even the output side cannot be saved by the drive just faulting. What you are actually checking are the 6 input rectifiers as well as the 6 reverse polarity freewheeling diodes built into the modern IGBT's. What you do is follow the current path from the meter through the component. When you place the negative meter probe on the DC bus Negative, then the positive on any of the inputs or outputs, you are reading OL because you are charging the bus capacitors with the output voltage of the meter. This is what you want to see. When you place the negative meter probe on the DC Positive and then put the positive on any of the inputs or outputs, you are then measuring the drops of all the diodes in the corresponding half of the drive. The three input rectifiers on the 'top', and the three reverse polarity diodes on the IGBT's on the 'top'. When you reverse the probes (positive of meter to DC bus Neg) and do the same operation, you are then measuring all 6 diodes on the bottom half. So you want to see healthy voltage drops typical of those rectifiers, such as above ~300mV or so. Anything below would indicate one of those diodes has failed shorted, and something is going to blow up either powering it up, or giving a run command (if it can't just fault).

i fell asleep 6 times watching this video

Nice

Cool thanks 🙏

That's freaking sweet

Could you shorten this video? Couldn't watch the whole thing

Make a video about doing panel wiring and diff kinds of cage style you can do 🎉

Thank you such a simple task you deserve a hundred atta boys🎉