- Видео 12
- Просмотров 88 827
Henrik L
Добавлен 31 авг 2012
Seaknight Windrunner 3, a painfully detailed review!
A weird swede with adhd disassembles a Seaknight spinning reel while mumbling incoherently
Просмотров: 30
Видео
thumbstick tension mod test
Просмотров 6153 года назад
things to consider: 1. spring should be centered if possible. though, this works just fine, the small offset makes the stick tilt ever so slightly. 2. the spring I added is too stiff and the increased tension of the stick is off the charts. 3. the fact that I also pushed the spring inside with some force makes it harder to press the built-in thumbstick button (one again, I should have gone for ...
thumbstick tension mod, no soldering?
Просмотров 1,1 тыс.3 года назад
experimenting with increased thumbstick tension without soldering. seems to work. try it and report back if you can! Just be careful!
Xbox elite controller series 2 deadzone "fix" and stiffening The thumbstick... A lot!
Просмотров 67 тыс.4 года назад
A not so short explanation of what i've found Ps: screwing of = unscrewing 😅
Gbg Ellen och Henrik (för dom hade inget för sig)
Просмотров 1545 лет назад
Gbg Ellen och Henrik (för dom hade inget för sig)
5min no soldering paddle add-on to Xbox one controller
Просмотров 15 тыс.6 лет назад
Diy paddle to your Xbox one controller, 5 min, all you need is a fork, two screws and a screwdriver!
Tip to instantly become a better halo 5 player
Просмотров 716 лет назад
Trick to make you a great movement player
Great video. keep up this kind of content, you've earned a follow. thank you.
Tight stuffs
I brought it yesterday. Plugging this shit into my computer, I found something interesting. My right analog had loose stick at one point above 12%, the rest was between 5 and 11%, so I sent it to the service center for replacement. I have to wait almost a month to play...
So I did this about a year ago for siege and at this point have a broken controller it completely trashed my dead zone over time and now I don’t get controller input until the stick is less than a mm away from the edge it’s like playing a game on max deadzone
After a year of use that is basically what you can expect from these controllers....if you're a bit handy you can open up the controller and clean the sensors on the joysticks. perhaps replace the sensor rings as well.
@@henrikl218 yeah I’ve tried to remove the top plate to clean the sensors but ended up breaking a prong any tips to finish the job properly?
Any tips for it not clicking down anymore. Just feels like a spring. Didn’t drop or anything. Right stick. 2nd time it’s happened to me.
there is such a large deadzone play on the stick
Twist it clockwise...It's loose.
I enjoy your experimental videos on joystick tension. I hope you take care of your thumbs, as I can't imagine extreme joystick tension is healthy.
Thanks man! Yeah they're doing fine 👍
Anyone with stiff analogs wana trade controllers for one with not sloppy/free roam analogs but analogs that feel like slicing through butter? I like stiff not smooth
Finally someone talking about this
Henrik L. Stick to the Danielson flyreels worldclass in your own backyard.... ;-)
Welcome to a short explanation …. 16 minutes later
I know i know 😅
@@henrikl218 interesting watch though
Hey can I buy one if those springs from you?
Haha I'd love to be able to sell those but since I live in Sweden and i guess you somewhere else, it seems easier that you make one yourself :) besides, every different spring on a different controller needs a bit of "fine tuning". However I can make an instructional video for you if you'd like? ^^
I have had mine for 2 and a half years. I take care of mine, make sure I don’t have sticky hands/any dirty grime or fluids on hands. I clean it and put it back in the case when I’m done. Never had stick drift you guys just don’t know how to take care of your stuff and just complain about it. Idiots…
You do have a point I'll give you that. But for most of us...they come that way from factory :/ sure it's a fairly easy fix...but the controller is super expensive and as soon as you open it, the warranty is gone! For 200+ dollars, depending on where you buy it, it shouldn't have as many issues at it does (sticks, bumpers, loss of rubber etc).
Nah, Microsoft doesn’t know how to do QC :)
Christ bless you, man!✝️❤️
How did you get the blue light on the controller?
Permanent marker and steady hands 😁
@@henrikl218 funny because the led was color changing the entire time. they just addewd an update and now you can change it to any color in the settings.
Your thumbstick is way too high
Is there a way to swap joysticks with regular stock Xbox joysticks?
I think so....you first option is to desolder the analog unit and replace it with a regular DualShock. Your second option is to glue an M3 nut on the bottom of the regular stick and screw it on the existing unit. The series 2 has M3 sized threads where you screw the thumbsticks on.
Did the hole pass into the square of the analog stick? And I wasnt quite able to follow. You just put that spring you showed inside the hope, closed it, and it was all?
hey i have the same problem thing is whenever I turned it the right side it comes back to the left. what can i do?
“Next I used superglue on my $200 controller” [Eject]
Lol, i know, this is not for everyone !
In the video, he shows a Power A Spectra Enhanced controller. This drill method may not work on Xbox controllers.
Actually you're right...it won't work in regular Xbox controllers. They don't have the same analog stick
I have been having a lot of latency issues with my controller. This is the “new” one they sent after my bumpers were sticking. So basically what happens is I’ll be moving & grooving then out of no where it’ll just stop. Almost like lag out.
Where did you buy the spring contraption
I made it myself :)
This man wanted 0% recoil for his controller that badly
I did 😂 and still do!
In all the time you drew this you could have done a video on how to actually do wtf you’re talking about
Lol yeah but the pin is already glued and i did NOT want to open that thing again 😅
bro it's such a good idea
Thanks man ☺️
What's your buddy's that fixes controllers I need my elite controller fixed 2 drift sticks ??
Get-To-The-Point After 4 minutes of watching I gave up. No information whatsoever unless later in the video but unfortunately that's way too boring
Yeah i know...i tend to rant 😌 maybe i'll make a new video that is shorter
This is not entertainment, it’s for educational purpose you tool 😂
Could I put the whole mechanizm from mi old controler (normal xbox one controler) and just put it where the broken mechanism is on mi searies 2 controller
IF it has THE same sort of connection to the Mainboard i Guess you could solder it ...but Then why not order a new mechanism online for a few bucks? :)
@@henrikl218 Ok thanks
How do you make the orange spring for the Xbox one controller?
Haha lol han är min matte lärare
Brand new
My controller came with a lot of play
That drawing part looks like something that does look right
Apply to Microsoft so maybe you can fix the upcoming controllers, maybe you know more that those stupids engineers at XBOX
who tf is gonna understand this bs😂
Not you apparently 😂
Your voice is calming
Genius!
Oh stop it you ☺️
I've owned both Elite controllers and I've got to say that it is such a shame that Microsoft wasted so much potential on with them both. The first elite lasted me for around a year of heavy use. The grips were peeling off the controller, the bumpers felt very loose and I had left stick. My elite series 2 became useless after a few weeks. I used the paddles so much that I broke the piece inside the controller that stops the paddle to give it leverage. I also had this physical deadzone issue, it got gradually worse to the point where it was unbearable. I returned it within a month of getting it. I've got to admit, though, that the app for the controller is perfect for me. The shift button was my favorite feature, I used a lot in games like Rainbow 6 Siege and Battlefield V. It could've been such a great controller, but it has major flaws that I doubt Microsoft will fix before they release another one. I ended up just rebuying a wolverine ultimate. I strongly I reccomend it, it's a very solid controller. If the wolverine had the same amount of customization as the series 2, it would be just perfect, but oh well. That's just Microsoft being Microsoft..
Agree with everything you said and the Wolverine is awesome!!! And.... I have the older Razer Wildcat and it's still going strong💪. Come on Microsoft, I believe you can make a controller without major flaws🙏🙏
You dont need to open it you can use the tools inside the xbox case and then you turn the sticks
I have same problem tool didn't work and screw is all the way down
I'm bouta switch from a 20$controller to the 200$ elite.... should I make the change bro
NOOOO you will most likely get a bad non responding rb button and maybe some right controller drift and both of these problems are common
how's the controller holding up
Don't buy it I got right stick drift after 2 months and my rb never responds
Holy crap. This entire video is a bad idea.
The drawing😂
Perfect 5/7 right? ;)
Did your joystick feel like it was struggling to move in the up direction? I play FPS games and moving forward (up) to walk forward feels like I can't walk or move forward sometimes. Is that what you meant? I did notice that if I take the joystick top off, it doesn't give me the stutter/can't move forward. But once I put the joystick thumbtack on, it will do it again.
Nah... Mine was just very jiggly with a large deadzone
@@henrikl218 its been doing the stutter today... I think I'll have to use my warranty with best buy.
Hawaiian Cerveza yooooo bro mines doing that too. Have you learned anything?
@@colebankston8752 Not really. Other than replacing the mechanics for the joystick its self. I don't have the tools so I'll be sending mine back to best buy to replace. For now Ill have to use the regular controller. Haha I feel so dumb pressing back triggers that aren't there.
It’s something to do with the magnetic bs
Do you not buy the elite series 2 it’s a waste of money
i got a replacement because the left thumbstick on my original broke completely and was sunken in. my replacement controller fell 2 feet and the right thumbstick gets jammed almost the same way the left one did
It's the best controller ever made at the price point.
Rig revolution x does not have this issue. If anybody is looking for a controller with no drift out of box
@@BC-ks9bmnah this controller is equal to a powerA pro. Shit is ass
@@YEETYfrmXBOXI want drift so always aimassist
I think the stick drift out of the box you just need to break in the controller it’s like it’s a new pair of shoes you gotta break it in and since it’s a new controller you might need to play with it for a while
Also another guess for the stick drift (not for everyone) but I feel like it has to do with their dead zone settings within their games. This controller is very popular in the Fortnite community for example and I know they like to play with little to no dead zone, and obviously with no dead zone they will have drift. That’s just a theory I need others to say their experience, but that’s what I thought of recently.
JwY well 10-10 dead zone shouldn’t give me drift
@@hero654789 ya i use it for fort on 18 on my right stick and it have to push a bit for it to go so defeinlty not ideal
Not true
@@gunnf1re32918? Like as in 18%?! You have to push your stick that much because your deadzone is way to high. The higher your deadzone the further you have to move your stick to register any input, if your drift is that bad that you have to set your deadzone to 18% to prevent drift, don’t even use it. Honestly you’re better off playing with stick drift in most cases, one: your stick isn’t drifting or moving by it’s self if your thumb is on it aiming or moving your character and 2: it’s also helping your aim assist readily engaged most of the time🤷♂️
how do u fix it when u can’t press the right stick in help
This guy must build the best houses in Minecraft.
Fax