![Rough Rooster Knife Sharpening](/img/default-banner.jpg)
- Видео 206
- Просмотров 731 527
Rough Rooster Knife Sharpening
США
Добавлен 8 дек 2014
My whole purpose of this channel is to teach freehand skill and knowledge of Arkansas stones.
Super Clean for degreasing?
This stuff works great. I do recommend giving it a shot.
Просмотров: 2 140
Видео
Freehand sharpening- My bevel looks great, but it's still dull!!
Просмотров 3,5 тыс.3 года назад
This is a very important part of sharpening. Re-Watch Enjoy 🐓
Freehand sharpening the mistakes most beginners make
Просмотров 9 тыс.3 года назад
This will help with alot of the guesswork. Enjoy 🐓
Simple green VS Dawn degreaser
Просмотров 21 тыс.4 года назад
There has been much talk on this subject. And here is you're proof Enjoy 🐓
Vintage Norton Arkansas never opened!
Просмотров 2,4 тыс.4 года назад
This was a eBay find, the stone was sealed from the factory. Don't know it's exact age. Guessing late 70s maybe early 80s.
Cold Steel Colossus cts-xhp Sharpening to hair whittling!
Просмотров 1,9 тыс.4 года назад
We will take a bid hunk of carpenters xhp to a hair whittling edge, with 4 stones in under 30 minutes. Enjoy 🐓
Degreasing vintage oil stones
Просмотров 3,1 тыс.4 года назад
I'm showing my method of de oiling and or degreasing nasty neglected oil stones. In this case, I have no idea what this stone could be. Enjoy 🐓
Hindostan stone, An American rarity
Просмотров 2,8 тыс.4 года назад
This is something I've never encountered, but I'm glad i did. It gives us a chance to venture outside the box. Enjoy 🐓
The fisherman and the tackle box
Просмотров 1,1 тыс.4 года назад
This video will tell you what you need in sharpening. "The best teachers will show you where to look, but won't reveal the answer (s). Nostradamus
Inadequate bevell's and why you should perfect them
Просмотров 3,5 тыс.4 года назад
Inadequate bevell's and why you should perfect them
Peening knife pins/ tweaking action on traditional knives
Просмотров 1,1 тыс.4 года назад
Peening knife pins/ tweaking action on traditional knives
Lt Wright large workhorse no edge to hair whittling
Просмотров 1,9 тыс.4 года назад
Lt Wright large workhorse no edge to hair whittling
Sharpening a Northfield (GEC) 12 and talking
Просмотров 1,4 тыс.4 года назад
Sharpening a Northfield (GEC) 12 and talking
Lapping a Arkansas with 2 different grits?
Просмотров 2 тыс.4 года назад
Lapping a Arkansas with 2 different grits?
True Hard Arkansas and stone quality talk
Просмотров 3,5 тыс.4 года назад
True Hard Arkansas and stone quality talk
Chip repair and sharpening on a tanto
Просмотров 1,1 тыс.4 года назад
Chip repair and sharpening on a tanto
I have the three Arks, and I'll probably get the translucent in the future. Of the soft and hard, the one labeled soft is the solid white stone, and the hard is the white marble one, but the hard feels much rougher. Are they mislabeled, or do I need to work on them more?
@@morehn that is a really good question and I've never thought about it but my thoughts are the hard Arkansas is more dense therefore it's harder so you would receive a repercut then a soft Arkansas The soft isn't necessarily softer It's just less dense and more porous if that makes sense.
@@roughroosterknifesharpenin5531 wouldn't that mean that the soft should feel coarser or rougher? Trying to figure out why it feels like the soft one grips the knife less than the hard one, when the soft one is supposed to be more abrasive, or a lower grit equivalent.
Do a video man!
It's me again. I just got a primitive cut from Dan's. It's not that big. But I love it. Bubba I wish you still had those. Yessir 👍
What a time capsule this video turned out to be. Purebloods were right.
@@airiksknifereviews9548 ??
@@airiksknifereviews9548 no response?
What’s the name of that knife?
@@Texan590 Benchmade proper
Bubba that blowed my mind what you told me. If your happy than I'm happy for you. BTW do you have any stone's you want to get rid of?
@@rickwhitson2804 All's I have left to get rid of is some nice sic stones. And some loose sic powder, good vintage oil to go with em. Stuff like that.
@@roughroosterknifesharpenin5531 What size are they. I need your email
Man I really like that old esse Btw I hope you get in the mood to make a video sometime . Hint hint. LOL
@@rickwhitson2804 I'm not really into the same kind of sharpening I used to be man.
@@roughroosterknifesharpenin5531 What's changed?
@@rickwhitson2804 well I don't have any knives anymore to sharpen. And I've picked up wood working pretty heavy. Plane irons, scraper blades, chisels etc.
Bro I'm 62 and it's awesome to see the younger generations carrying on the tradition. I've learned a lot from you. Bubba don't ever stop.
@@rickwhitson2804 I appreciate it man.
I would love to try one
Years later but here is my 2¢. Using pliers, I break the blades into 3-4 inch pieces. Drill holes for lanyard as needed. I also file down the teeth of the hack saw blade. This keeps the HS blade from tearing up your ferro rod. Not all they way but half the original height. The blades are flexible when cut to the right length. The flexing does a lot of the work for you and it seems to make directing the sparks easier. Also, Magnesium shavings can be made by using a drill to create the shavings. The coarseness of the shavings depends on the size of the drill bit. It is probably cheaper to just buy by the bag but you can make some for that weekend outing if you do not have the bagged magnesium on hand. Harbor Freight still sells the magnesium striker bars for $1.69 each.
Dam it man. That is one beautiful stone.
You know man I'm the only one at work that is into knife sharpening. But I swear when I order a stone I feel like a kid at Christmas waiting for that thing to get here. It's a awesome hobby. BTW and it takes a lot of skill too. LOL
Bubba it's 4 years later and I just got over that crap. It's here to stay.
@@rickwhitson2804 Fuck COVID. I had it and bilateral pneumonia at the same time. It literally almost killed me.
I've sharpen on the top of my truck window. It's ok. Far from great. LOL 😂
Man that diamond stone is huge. Where should I go to get me a top quality diamond stone?
@@rickwhitson2804 dmt
Man that is the coarsest stone I've seen. Would be good for those crappy jobs. You know what I mean. LOL 😹
FRRRRAKOSTO 2024 64 65 URO RSO DOPO FRRAKOSTO PRNDO IL 4 MAK KUSTO O IL K LIT ZTL BLLACK
what ever happened to the rooster?
@@EagleRun23 long time no see man. Thanks for the comment. I'm still around. Just not posting
@@roughroosterknifesharpenin5531 I dont do much knife stuff anymore, but I posted a knive video today and I thought Id look you up! blessings!
Well bubba i found a couple videos i haven't seen. I just gotta say I have never been a fan of spiderco. I know I'm weird. LOL 🤣
@@rickwhitson2804 they aren't for everyone.
Hey brother i don't want to run this in the ground. But I wish you would make a new video. BTW what good diamond bench Stone would you recommend that I get. I've heard too many negative things about the DMT . There quality have went down hill big time. I've heard it from too many people.
@@rickwhitson2804 I use DMT. That's pretty much all I use anymore. I have the coarse fine and extra fine. They work great. I've had issues with them too. But they are still the best imo.
If anyone reading this is serious about learning to sharpen freehand, listen to what this man says, follow his teachings, have patience, and you will be seeing improvement in no time.
Very useful video. Thank you. I just found your channel. It’s great. One thing though. I’m an old man. I’ve been using email since 1993 and the Web since 1994. People have been being rude little jackasses on here since then. Just ignore these fools. Because they will not stop.
That is such a beautiful stone (grey and white)
You know I've been thinking about this video, and concluded I don't think this comparison is quite right after all because we're comparing a heavy duty degreaser to a regular one. To make this fair, I think we need to compare heavy duty with heavy duty. Try with Simple Green Pro HD (HD standing for Heavy Duty) against Dawn Heavy Duty and see which one comes on top from that. Simple green has a different makeup and composition than Pro HD and they're both purple as well by the way.
@@cellsheet no I will not do a video like that and I will tell you why because everybody on this fucking channel was harping and harping and harping about old simple greens better and this and that so here's what you got their method versus mine.
@@roughroosterknifesharpenin5531 gotcha, I guess others overestimated regular SG as well in that case, makes sense
@@cellsheet simple green is garbage that is my point of this video it stinks it doesn't do what it's advertised it is nowhere near a degreaser
Hard to watch your videos. All the "uh" and "um"s every other word.
@@Dashr44 cool. Don't fuckin watch them.
@@roughroosterknifesharpenin5531 I'm not. LoL
@@Dashr44 good. I have plenty of subs. And I talk to them daily. Thanks tho!
@@roughroosterknifesharpenin5531 No problem. You're welcome.
Bubba I need some advice? I've got a Dan's hard. Absolutely love the thing. But literally after about 3 or 4 knives I can feel the thing getting smoother. It's getting glazed already. In your opinion what is the easiest and best way to touch that thing up. Should I get me a pocket diamond hone or go with the wet / dry sandpaper?
@@rickwhitson2804 I'd get a pocket diamond stone.
Bubba I got me a Dan's translucent. Ooooooo yeah I paid for it. But man it was worth every penny. OMG that thing cuts so good 💯.
Man I really love that stone. Beautiful
"HOLY SHIT THAT MOTHERFUCKER IS SHARP" 😂😂😂😂😂😂
Wait so you're telling me if I want a real Dan's Arkansas Stone translucent or black I have to order it and wait 2 years????? Dude what takes it so long? Like that alone is stopping me from getting a good stone because I'm way too impatient to wait too freaking years. Like kind of disappointed but it seems like this is a marketing strategy by Dan to only release so many a year to keep the price and the rarity and prestige around his brand of stones because if it's hard to get and you got to get on a waiting list it makes it seem like you got to be part of the inside club to get it. That might be why people use cheap stones that you hate on them for because people don't want to just sit around and wait for 2 years for a sharpening stone. I guess I'm going with diamond plates 😭. Damn Dan
Dude that's bs. Everyone I send there gets one within a month.
Well shoot I was about to purchase some atoma diamond plates but you just sold me on buying a translucent and a black dans. I'm looking at it as more of a precious mineral than I am a tool
I just got a Dan's translucent. This thing cuts so good. I like it better than my black arkansas. Great investment. BTW I really enjoy your videos. Dam good stuff
Hey rooster are you doing well? Hope so. Watching the new fallout series?
I hope this hiatus is good for the ol noggin, instead of bad. Sometimes I stop using social media and realize that’s my only connection to the world anymore.
Doing alright I guess. You? And not yet
I've never owned a washita. Hopefully one day I'll run into a good buy on eBay or find one at a flea market or something like that. Great collection you got.
Thank you
Whr to buy ?
Sharp. Love the old ka bar
I don't mean to be a broken record. But u-tube can really suck. Channels that you can learn something good and that is fun to watch. But on the other hand they pay these idiots to do all this dumb crap and they're getting filthy rich off of it. What is wrong with this picture
I've got a much younger friend that I'm trying to learn how to free hand. He had one of those things. It has almost ruined his blade it is removed so much steel. Well anyway he don't have it anymore. LOL
Freaking junk!
Of all my Stones I do not have a washita. I would love to know. LOL.
You have a good point. Bro I've seen some new knife designs that are ugly as crap. Absolutely impractical as hell. LOL
There are a few crazy ones that are not user friendly for sure
I get my best edges when I'm feeling good. Mentally and physically
Hey bubba what is your opinion of Flissa knives? I've got 2 and for the money. They are awesome
The only bad thing about this is I didn't find your channel sooner.
I've got the Norton crystlon and the India. Both are awesome stones
I've got one. A really great knife. Hi-carbon steel
The vintage ones are great. The new ones are junk
@@roughroosterknifesharpenin5531 yes sir I agree 💯
You have a felon's name on your shirt...shame on you.
You better be glad that I've got strikes on my community guidelines or I'd let your ass have it. I support Donald Trump 155% whether he got convicted or not he is a good man and he was leading this country in the right direction I'm sorry that you're missing formed and that you support child molesters.
I've got a soft Arkansas that needs to be done bad. I bet it's around 2000 grit. LOL 😂
I love my black arkansas. Absolutely one of my favorites
Rooster, Haven't seen ya stream in a number of months. You inspired me to pick up and try good arks ( after having tried shit cheap ones many years ago ), after years of being happy with diamond plates and Japanese water stones, both natural and synthetic. After my learning journey with my set of Dan's arks( Soft, Hard, Translucent, Black all 10x3x1 or larger ) picked up over the course of a few years I've gotten an edge too sharp to even whittle my wife's pixie thin hair. Just pops in two as soon as it touches it. Just want to say thanks for making me give arks a second chance. Hope you hop on again for a sharpening or discussion stream, and hope all is well. Cheers, Chef Kev
thanks for sharing your insights and experience in a very straightforward and thoughtful manner.