Видео

Working great no issues. Thanks for watching Let me know if you have any questions

4 inch pvc Thanks for watching and let me know if you have any other questions

Your welcome glad it will help ya out if you have any questions just let me know

Wouldn't change a thing. It's been performing perfectly. We fish for striped bass so we don't run into any weed or things collecting on it. We pull planer boards and the boat doesn't get into the shallows just the boards. We are in north east tennessee and we don't have alot of grasses where we fish mostly soil and rock bottoms. Let me know if you use it and if you have any questions about the build thanks for watching and tight lines.

The gap I cut was 2 3/8 inches be sure to sand down the edges so it sits flush with the motor housing. Might vary a little depending on what motor you have . Let me know if you have any other questions and thanks for watching

Awesome video and I have the PowerDrive v2.. ur design is gonna save me prob 300 bucks.. GREAT IDEAL

@scottrummel9477 glad it's gonna help you out. When I ran into this problem it made me mad that they didn't make something to adapt there product to all motors so when I came up with this I wanted to help out the people that had they same problem. Thanks again and tight lines

Your welcome glad it worked for you and thanks for watching

I thought about doing that but you would have to cut it flush with the motor housing and I didn't want to chance that when they cast the skeg that ther would be a small hollow spot where he skeg and the housing meets. I didn't want to void the warranty or have a point that if I had to patch it that it would be a problem spot for a leak. Thanks for watching and let me know if you have any other questions

Guess Im going the PVC route!!!

@shayeoana probably the better option

Here is the link to Amazon for the mount. I used to attach the transducer to the pipe spacer Humminbird 740182-1 AD MTM HW MSI... www.amazon.com/dp/B07L3K13ZC?ref=ppx_pop_mob_ap_share Make sure you check the number of screws on the bottom of your transducer, mine had eight but some models have less. Didn't use a cover or anything we striper fish so we don't get into any weeds or trees. Thanks for watching and let me know if you have any more questions. Tight lines

Glad this helped you out. Thanks for watching and tight lines

That is a penn spinfisher V 8500 live liner. Thanks for watching and let me know if you have any other questions

Thanks for watching they do make the black pipe but I already had the pvc and the flex seal. I don't have any weed issues but we fish for striped bass so aren't in the real shallow water. Thanks again for watching and tight lines.

Humminbird 740182-1 AD MTM HW MSI Trolling Motor Adapter Bracket a.co/d/1yAbBfV Here is the link to Amazon Mine had 8 screws so make sure which one you need cause I think they make a 6 screw one. The number of screws is how the transducer mounts to the bracket. Thanks for watching and let me knowbif you have any more questions.

@@subasurfcasters thanks for replying!!

@@subasurfcastersdid you use the black flex seal spray can?

Yes the black spray flex seal

No it doesn't works perfectly Thanks for watching

Hope it helps you out. Let me know if you have any questions I can help you with. Thanks for watching

No problems with it and wouldn't change anything . It works perfectly. If you have any questions during the build let me know and thanks for watching

@@subasurfcasters thanks for the great video/idea I will be doing this

@@loganmapes2307 let me know if you have any questions during your build. Thanks for watching

@@subasurfcasters How did you manage the transducer cable running up the shaft of the motor to avoid pinching/damaging it

@@loganmapes2307 mine doesn't attach to the motor shaft. I have a new minnkota powerdrive and the shaft of the motor slides in the motor housing until it hits a stop bracket you adjust for the motor depth. I have it attached up by the head of the motor above where it slides with a zip tie

We use fresh cut mullet. Go at low tide to check out the beach and the sand bars cause it's always changing. We fish all day but 3 hours before low and high seem to be good but you never know sometimes we catch them all day. Thanks for watching. Let me know if you have any more questions.

Thanks for watching

What can I help you with

Sir I am Bangladesh i

@@subasurfcasters I love fish sir

@S H A O N D A we love to fish also. Did you have a question regarding fishing that I can help you with. And thanks for watching

Sir I Go to your house ..and you are me fishing to sea ....sir please I go to your home..

Can't do that but can answer any surf fishing questions you have

@@subasurfcasters sir I like fishing but my Bobbi you and me fishing to sea

Its my numbar sir

Thanks for watching

We use 5 to 7 oz frog tounge weights. 16/0 mustad duratin circle hooks and we use fresh cut mullet we catch. I have another video up that shows our whole set up. Hope this helps let me know if you have any other questions and thanks for watching. Tight lines

Didn't know there were stripers in Wilbur. We have caught some nice trout there.

Striper aren’t below wilbur

Thanks for watching

With That type of tag in order to get the rolled up paper inside of it out with all the info on it you have to push the tag line like a plunger to push the paper out and when you do that it breaks the water tight seal of the tag. That's why we removed it.

@@subasurfcasters you're not supposed to cut or take of any tags on any wild animals!

@@jonathanespadas2045 we are volunteers for NOAA shark tagging program and they state you can release a shark with or without the original tag. And you can re tag the shark if desired. Thanks again for watching

@@subasurfcasters bs NOAA volunteer keep telling yourself that Bud ! ! Maybe next time you will leave the tag on let the real people tagging and keeping track of the wild animals do their job .

@@jonathanespadas2045 anyone can be a volunteer look it up it's under NOAA cooperative shark tagging program

Absolutely our favorite freshwater fish. Thanks for watching

Trout We get them from a local trout farm. You have to have a receipt for them if you use them for bait. Thanks for watching

Do you mine sharing the trout farm name and location? Thanks in advance:)

The name is Cable trout farm in Elk Park NC his number is (828)406-8920 His name is Mike.

there is also a trout farm in Hampton TN but he is trying to sell it and it's hard to catch him there. his number is (423)725-3861 sometimes he will meet ya there but not as reliable as Cable trout farm

@@subasurfcasters thank you 🙏

Glad it helped you out and thanks for watching

Thanks

It works great don't even know it's there. The transducer reads perfect. I was skeptical about cutting off the skeg. Since it would have to be cut flush with the motor housing. The housing and skeg are kind of like a die cast metal piece and didn't want there to be a empty cavity there where it would be cut and the motor leak so I came up with this mount. Hope it helps you out. If you have any more questions just let me know and thanks for watching.

@@subasurfcasters have you had a problem with the pvc slipping around the motor when you tighten it down? Father in law was using it Saturday and it was working well until it didn’t- repaired it and it was ok again until he hit my dock backing out and broke it off…. Going to try adding a transducer shield saver

@@travisconley4636 No problems with it slipping. The slot that you cut in the bottom for the skeg to fit in keeps that from happening. Hate to here that he broke it on the dock.

@@subasurfcasters how wide is the piece of pipe you removed

@@travisconley4636 I'll check and let you

Thanks mom

Fresh cut mullet

@@subasurfcasters fish finder or high low rig? Sorry I’m from Boston but coming to Beaufort next week to visit my sister.

@@subasurfcasters never mind lol, I caught a glimpse of your fishfinder rig with the steel leader.

@@6atlantis fishinder carolina rig I have another video on our channel that shows the rig and all of our setup if you wanna check it out thanks again for watching

@@subasurfcasters thanks, I can rig that up. I’m coming to S.C next week to visit my sister, last time we fished in the river in Beaufort using a high/low rig for the usual suspects(whiting, rays, sharks et.). This time I’d like to throw some artificial‘s and have access to live fresh bait besides shrimp for some reds and trout. I wanted to see what rig you guys were using in case I surfcast hunting Island. Thanks again.

Good luck and tight lines

Yes we use live bait but the size depends on the time of year

Yes it is on Boone lake. Thanks for watching and check out our other videos

@@subasurfcasters the biggest striped bass I caught out of Boone was 40 lb

@@jeremiahcalebhehehehe5687 my wife caught a 44 inch 40 pounder this spring got pictures but no video

@@subasurfcasters nice I got a picture of mine and trust me man I believe ya there is some giants in there

We do cast from the beach

@@subasurfcasters u cast from land and catch those big sharks? Wow that’s crazy

@@tylermitchell1672 yeah sometimes they are closer than you would like to know lol.

We also use fresh cut mullet and sometimes live ones

Kiawah island thanks for watching

We use penn spinfisher V 8500 live liner models. They have a new model the spinfisher VI now. The rod we caught that one on was a shimano 12 foot surf rod with heavy action We also use ugly stick rods that are also 12 foot. We use the same reel on all the rods. Hope this helps We also have a video that shows the whole set up We use. Leader hooks everything if you want to check it out. Thanks for watching. Let me know if you have any more questions.

Thanks man and thanks for watching hoping to have few more this year.

Yeah man for sure it was crazy

Thanks glad you enjoyed it