Видео

Great video, thank you. You showed some B-7000 adhesive to the camera but never seemed to use it, did I just miss it?

This video could've been 3 minutes long...also, i automatically give a dislike for any video with ai voice over

If all four burners are dead it means you had a power surge. Turn on the ‘self clean’ function and let it run for 5 seconds. Then turn it off and the computer should reset so everything works.

Hey could you please assist me and answer some questions? I want to understand what I made wrong....I tried to repair my sons iPad A1488 and i followed yours and other videos to get an idea how to change Digitizer on my own. Everything went fine, I also disconnected the battery before removing the old screen. Only the Digitzer was broken, before I tried to repair the LCD was working without errors. When I connected the display the first time, it worked...but at the left side there were some coloured lines and black parts on the display. Because I wanted to test before, I only laid the screen carefully down and didnt used the screws..when I moved the iPad a little bit, the stripes on the left were gone and some new stripes appeared. So I thought that errors maybe are not physical?! I tried a little while to get back first state where most of the display was working, but I cannot repeat it. Sometimes when I tried to find out, whats going on and held the iPad in my hands, then the Apple Welcome Screen is appearing below many many error stipes and black parts, but I also couldn't reproduce where to press or pull to see it again. I show you a verty short clip of my screen....ruclips.net/user/shortshgGsKHjprqM Is it completely broken now? What went wrong? I was super careful and the complete process seemed easy and worked out well until I tested the display.... Maybe you say the LCD is gone, get a new one, but how to make sure the same thing didn't happen again?? I want to understand it more deeply and I ordered two broken iPads to test it again...are there more connections between LCD and iPad or is it only the small fllex cable? Coukld the Flex Cable be broken?? I think actually I tried to hard and my current display is somehow broken, but when I am correct, then its only the big large crack...but it is not visible crack in the LCD. It would be very nice If you could answer my questions. Thank you.

I just replaced my screen on my iPad 5th generation and I done everything right but now it won't turn on

Before wasting all that gamble on getting the parts and getting it back together, I’ll just buy a used one cheap, that works.

This is the worst piece of mess GE had ever did.

Aaa,,,Sir? It's work in laptop?🍃

So I know others have problems like this too, like one outer burner and one inner burner stops working. Because it’s metal 3 people I know felt a shock when touching the Metal bars upon turning on the stove/oven. GE will answer for it.

Can you use excel?

The switch assembly wires is not available anymore anywhere. I have change the infinite switch only and the burner but the front dual 12 " burner still don't work. All the other burners are working. Any suggestions to change only the wires?

same phone,same colour,same crack,same lines😂😅

The moststupid video to explain how it is done

Thank You

Would this work if I boot it from mac os?

Can I connect other drives with usb hub to the phone?

Where did you get that ratchet??? What’s the brand?

Does not work with my S7 edge 😢

Where did u order the package with the screen and all tools?i would like to try this my self with my screenbroken ipad 5.and whwre cab i buy this dryer? Wanna thamk u for a simple and good clip

Will this USB work on another PC? Means can I use it on multiple PCs?

Just buy a new one! Too much hassle

Thank you!!! Exactly what I needed!!

my lights are working but the stove top does not get hot on any burners

i have a lenovo laptop and my son is gaming night late

Please is there any software to turn my old phone to a functioning computer where i can download games/win apps and then control it from another pc? basically what i wanna do is streaming 3 phones in one computer to play a game with 3 accounts since i cannot have 2 in the sale phone. Please if anyone has an answer let me know it would help me big time. thanks in advance.

Throw it out and just buy a new brand oven 😅

Hello... My Samsung galaxy C7 pro display is dead. I cannot see anything also the touch doesn't works. It is also pin locked. Can I connect this phone too as you did? I saw somewhere that in samsung mobile we need to agree to the pop up in mobile screen after that only screen would be shared on monitor. Please reply I need to back up my data from it.

Can I use it with an old Lumia 720?

Samsung only?

My issue is all burners and oven not coming on. No burner light. But the clock works and control panel seems ok. Any ideas?

Exalent

Can i run python code in rpi 4 8gb ram with rapian lite os please reply

Why would all burners not work . I look at the switches but could not see any burn switches. The burner indicator light come on for all 5 burners. Oven works fine.

Best video ever , very detailed every step.Thanks !

Thanks man you helped me a lot

Is this phone want to enable usb debugging???

hi.. after i formatted the ssd harddrive, the internal windows on the pc crashed after a few days later. firstly there wasnt any problem. i could open both. i had blue screen problem. how can i solve that. If I don't open external windows, this problem occurs. why might it happen

I used my LG Stylus 2 for this one. Its really cracked, But the LCD is still working. I used it as a pocket PC, I also used some wimdows simulators (Win 10, 7, and 95)

Does the external hard drive need to be fat32 to install windows on the external hard drive?

hello, when I plug the "usb ssd" into the usb port outside the computer, does it work as fast as normal ssd hard drives?

thx

I'm your 1000th subscriber

I searched way to long to find your simple guide to get it done. Thank you!

Thank you for posting this!

Can you tell me the part number of the set switch assembly that you ordered ? Thank you

My GE profile electric range 7 years old, burner s have problems 3 times, I can’t fix it anymore , even I replaced burner elements and switch. I don’t want learn how to replace wire and control panels. I will buy a LG or Samsung kitchen appliances next time.

You say "simply hook up the cables as seen on the video" Yeah that's easier said then done bro! It would of been nice since you were making a video on how to do this then maybe you would explain HOW TO DO IT! It's like it was just a lazy attempt at showing us how to do it correctly. So now I'm on to another video.

Hello, thank you for this helpful video! I have a question about the windows update, when I want to check the updates this message shows: "Your device is missing important security and quality fixes" with no error code. Do you know how I can fix it?

stupid music, useless. Garbage post.

Hice todo lo del video, exactamente como lo dice, pero con Fedora y no funcionó