Esben on tech
Esben on tech
  • Видео 14
  • Просмотров 120 312
Start and stop climate in your BMW i4 with Voice command in Google Assistant.
This is a demo of how to control climate in your BMW i4 using voice command in Google Assistant.
Просмотров: 156

Видео

ID.4 offline fix
Просмотров 42 тыс.2 года назад
For some reason the ID.3 occasionally looses the connection and becomes offline. It shows this with a warning when the car starts and it tries to read the connection status. It's also visible on the little globe in the upper left corner of the infotainment screen. There is no signal indicators and the 4G logo is missing. It's quite easy to fix this issue by removing fuse 19 for a couple of minu...
ID.4 integrated in HA
Просмотров 1,7 тыс.2 года назад
A short walk through of my work-in-progress ID.4 integration into HA. References mentioned in the video: VW Connect ID integration: github.com/skagmo/ha_vwid Video on Node-Red flow scraping MyVolkswagen (for location data): ruclips.net/video/dSkKPFbLZmc/видео.html Home Assistant intro: ruclips.net/video/sVqyDtEjudk/видео.html
Smooth dimming with Node RED
Просмотров 11 тыс.3 года назад
In this video I'm taking advantage of the built-in dimming commands in the IKEA bulbs, to achieve a seamless and smooth dimming with minimal traffic on the Zigbee network. In most of my house I have IKEA Zigbee bulbs and on/off switches. I use binding to enable the switches to talk directly to the bulbs. This gives me several advantages: 1) The light switches work even if my HA is down. 2) The ...
HAPTEK WIFI Switch 4xRGB Multi-tryk i NodeRED 2
Просмотров 2643 года назад
Jeg blev inspireret af en henvendelse og har opdateret mit multi-tryk subflow således det nu understøtter ubegrænset antal tryk. Du kan således lave et ubegrænset antal handlinger - i princippet. Subflowet i Gist er opdateret og kan findes her: gist.github.com/esbenr/20c09fb85dec8da67c08809e54131367
HAPTEK WIFI Switch 4xRGB Multi-tryk i NodeRED (no music)
Просмотров 3703 года назад
HAPTEK WIFI Switch tilbyder basis on/off tryk i HA. Jeg viser her hvordan man i NodeRED kan lave et flow der tillader single, double, triple og quadruple tryk samt long press. Link til subflow: gist.github.com/esbenr/20c09fb85dec8da67c08809e54131367
Haptek WIFI Switch (no music)
Просмотров 4103 года назад
Jeg taler lidt om Haptek's ESPHome-baserede WIFI kontakt til LK FUGA og gennemgår installation og integration i Home Assistant. Kontakterne kan købes hos HAPTEK: haptek.dk/shop/ HAPTEK WIFI Switch 4xRGB: haptek.dk/shop/smarthome/3-wifi-switch-m-4-rgb-led-og-lydgiver.html HAPTEK WIFI Switch med 1xRGB: haptek.dk/shop/smarthome/6-wifi-switch-m-4-rgb-led-og-lydgiver.html Forum med support og guide ...
HAPTEK WIFI Switch 4xRGB Multi-tryk i NodeRED
Просмотров 4373 года назад
HAPTEK WIFI Switch tilbyder basis on/off tryk i HA. Jeg viser her hvordan man i NodeRED kan lave et flow der tillader single, double, triple og quadruple tryk samt long press. Link til subflow: gist.github.com/esbenr/20c09fb85dec8da67c08809e54131367
Haptek WIFI Switch i Home Assistant
Просмотров 1,1 тыс.3 года назад
Jeg taler lidt om Haptek's ESPHome-baserede WIFI kontakt til LK FUGA og gennemgår installation og integration i Home Assistant. Kontakterne kan købes hos HAPTEK: haptek.dk/shop/ HAPTEK WIFI Switch 4xRGB: haptek.dk/shop/smarthome/3-wifi-switch-m-4-rgb-led-og-lydgiver.html HAPTEK WIFI Switch med 1xRGB: haptek.dk/shop/smarthome/6-wifi-switch-m-4-rgb-led-og-lydgiver.html Forum med support og guide ...
IKEA Trådfri Switch udviddet med 2 ekstra funktioner - altså op til 6 handlinger på on/off-knappen
Просмотров 2633 года назад
Jeg har IKEAs Trådfri knap over alt i huset, flere steder ombygget til at sidde i 1M FUGA rammer. Men knapperne giver default kun hhv. on/off samt dæmpning op/ned. Jeg har dog lavet et flow i Node-RED, det tillader 2 ekstra handlinger. Det drejer sig om hhv. on (når lyset allerede er tændt) samt off (når lyset allerede er slukket. Det gør det muligt f.eks. at kunne "bladre" igennem scener samt ...
MinVolkswagen data i Home Assistant via NodeRED subflow
Просмотров 1,4 тыс.3 года назад
Jeg har lavet et subflow til NodeRED, således man kan få bildata fra MinVolkswagen/connectedcars.io in i Home Assistant. I videoen giver jeg en introduktion til det samt viser ganske kort hvordan connectedcars API'et fungerer. NodeRED subflow kan hentes her: gist.github.com/esbenr/abcc8670d6070715eb40320d8c99b9a9 * Subflowet er blevet opdateret således man nu kan indtaste namespace sammen med e...
Scraping app APIs and integrating them as sensors in HA
Просмотров 8593 года назад
Danish stream about scraping app APIs and integrating them into Home Assistant. Charles: www.charlesproxy.com/ Postman: www.postman.com/ ApowerMirror (mirroring phone on computerscreen): www.apowersoft.dk/phone-mirror Restful sensor in HA: www.home-assistant.io/integrations/rest/
CC2531 Zigbee2MQTT on Home Assistant - the simplest way
Просмотров 58 тыс.3 года назад
How to set up CC2531 Zigbee2MQTT on Home Assistant the simplest way using no commandline. Pairing Aqara button device with Zigbee2MQTT. Daniel Welch's repo for the Zigbee2MQTT integration: github.com/danielwelch/hassio-zigbee2mqtt
Cloud-less video doorbell on TTGO-Camera integrated with Home Assistant
Просмотров 2,8 тыс.4 года назад
The video is in danish only. Please leave a comment if you would like it in english. Me building a cloud-less video doorbell out of a ESP32-based TTGO-Camera module and integrates it into Home Assistant using ESPHome add-on. Configuration for ESPHome can be found here: gist.github.com/esbenr/c820957bda542597acc5470fda53272a

Комментарии

  • @wendycrossman2236
    @wendycrossman2236 6 дней назад

    2024 ID4 Pro S AWD northern Alberta Canada. Thank you for the fix!

  • @FrancisMcDaid
    @FrancisMcDaid 12 дней назад

    Thank you, my 2024 RWD ID.4 lost internet, followed your instructions and it sorted it out, very helpfull.. 👍..

  • @werty1432k
    @werty1432k 13 дней назад

    Solved it for me! 2024 Pro S AWD Canada, US built

  • @GibsonBuck
    @GibsonBuck 2 месяца назад

    It solved my problem, MERCI.

  • @nataliehakim6988
    @nataliehakim6988 2 месяца назад

    This solved the problem on my 2024 Pro S AWD thank you so much!!

  • @thockenos
    @thockenos 3 месяца назад

    Works like magic! Thank you!

  • @Mvf38000
    @Mvf38000 3 месяца назад

    If you want a problmatic car this is what you want you will have a different problem everyday I think this car will be recalled VW can’t sell something that does not work and they can’t get you in for 5 days to look at it and tell you they have no loaner cars, can they?

  • @vasurav
    @vasurav 6 месяцев назад

    Hey sorry to resurrect this really old video. This looks incredible. Do you know if it is possible to do this using ZHA instead of MQTT? You mentioned that you could do this using a regular "call service" node but I cannot get it to accept "brightness_move" there in the light.turn_on or through any of the zha commands either.

  • @TheNielsen73
    @TheNielsen73 9 месяцев назад

    godt jeg fandt din kanal , flere timer , gået med prøvet at få andre yaml filer til at virke uden hæld. også virker din i første forsøg , super godt beskrevet, og så dansk what not to like :-)

  • @piyush1309
    @piyush1309 9 месяцев назад

    Thanks so much for the video, very helpful!

  • @DIYtechie
    @DIYtechie 10 месяцев назад

    Hej Esben. Fin demo. Er det en standardfunktion i BMW-integrationen i Home Assistant, eller kan du sige lidt om, hvad vi ser?

  • @codypearson6937
    @codypearson6937 11 месяцев назад

    Thank you so much for this! I was having trouble setting up Car-Net on my ID.4 and this fixed the issue. Saved me a trip to the dealer!

  • @ethmtn604
    @ethmtn604 11 месяцев назад

    Any help on resetting services notifications without obd tools please 🙏 VW ID4.

  • @Joe11y11
    @Joe11y11 Год назад

    It looks interesting, but I don't understand much. Could you please add subtitles? Thank you!

  • @pato10111
    @pato10111 Год назад

    What a hunk of junk. Why am I pulling fuses in my wifes 1 year old ID4. Madness. Wouldn't happen in my Polestar.

  • @stefan2796
    @stefan2796 Год назад

    VW has a nasty habit in pushing products on the market, which have not been fully tested/developed yet. Just wait a couple of years and then the EV's from VW will hopefully give less trouble... (and have a lower salesprice!).

  • @ShajratunTayyibah
    @ShajratunTayyibah Год назад

    This method will give you air bag error

  • @OK-uz9yv
    @OK-uz9yv Год назад

    I got the 4g signals with this yes! Still in my informainment system offline button is like stuck, can't slide the button "go online" into right, when i push the button, it does not react. Very strange....

  • @istvanattilagal9220
    @istvanattilagal9220 Год назад

    Working! Thank you!

  • @andersjuuljensen9160
    @andersjuuljensen9160 Год назад

    Just picked up a ID.4 Pro Performance and had the issue... Tried the tips and tricks posted in this video to no avail. I did however find that the small "info" -icon at the roof gave some indication ... When pressed I see the Globe switching to 4G then 3G and then back to globe while a "human friendly" female voice calmly states: "This service has been deactivated, please contact a dealership or service provider" ...

  • @vulcanbespock
    @vulcanbespock Год назад

    Thank you very much for this video. So easy to follow F 19 fixed it.

  • @emil.jafarov
    @emil.jafarov Год назад

    Same problem. İ did it as you said. İt worked. Thanks

  • @ashokmanji
    @ashokmanji Год назад

    Works on a 2021 VW ID.3 Pro. Thanks!

  • @VadimTikhanoff
    @VadimTikhanoff Год назад

    Thank you for this video. Extremely useful. I had the same problem but lasted for a week, followed your instructions and worked like wonders. Thank you again

  • @frodeskalevik5163
    @frodeskalevik5163 Год назад

    Very helpful - worked for me on my Id4 - Thank you👏🏼

  • @akosnemeth4608
    @akosnemeth4608 Год назад

    Thanks a lot, it realy works at 2021 ID4.

  • @martincostabel
    @martincostabel Год назад

    In the video it looks very easy, and it is if 1) you have the right tools, especially tweezers, 2) you are parked on a clean ground, 3) you are young and agile. When you do it yourself, you will find that you are not sitting in the driver's seat while doing it, but probably kneeling outside, so provide a little carpet if the ground is not clean, and padded if your knees are older.

  • @barryh13
    @barryh13 Год назад

    Worked for me, thanks! God, VW software is rubbish if it requires such hacks!

  • @GalisNO
    @GalisNO Год назад

    Tusen takk for videoen. Det funket på første forsøk.

  • @sheikhbtm
    @sheikhbtm Год назад

    Hi there, I have VW ID.6 and in the past 4 months I have been gone office over 20 times - ah it’s so frustrating that I cannot connect my Apple CarPlay with full confidence. Any suggestion or solution please

  • @laatu1234
    @laatu1234 Год назад

    What is that fuse?

  • @Tajikblogger001
    @Tajikblogger001 Год назад

    Hi there, my VW ID4 both screens are shut down, but I still can drive, small screen showing that I am driving and it is on D, thats all! Other parts just black! Can you guys help me what to do? Thank you

    • @gerryheery1388
      @gerryheery1388 Год назад

      try holding down the power button on the infotainment for a minute or two

  • @dannielsen6306
    @dannielsen6306 Год назад

    Fik du nogensinde lavet flow færdig så man kunne holde to knapper inde? :) Ved du om der er nogen der har lavet mulighederne i selve trykket?

  • @danmatiesanu6823
    @danmatiesanu6823 Год назад

    how can I get the device path if I don't have a supervisor install?

  • @bechirmestiri9584
    @bechirmestiri9584 Год назад

    Thanks a lot for yr great tip 👏👏 Worked 100% with ID.3 👍

  • @MrGunca100
    @MrGunca100 Год назад

    Thanks for great info. Happened to me too. Offline mode sorted. Only for right hand steering cars fuse panel is located in glove box. Needs remove glove box door and fuse lid is located on left beside saloon filter element.

  • @reinfriedgellert2579
    @reinfriedgellert2579 Год назад

    Vielen Dank, das hat prima funktioniert!

  • @sa0jnn872
    @sa0jnn872 Год назад

    Big thanks for posting this fix. Went off line and couldn't go back. Popped fuse 19 as instructed and the problem was solved.👍

  • @Nikorasu69
    @Nikorasu69 Год назад

    Hello neighbour, you just saved the day. Just moved over to Zigbee2MQTT and got stuck on the dimming issue. Deconz had a build in domain that handled it in a similar manor like this. Thank you very much for sorting this out.

  • @sofiascarrentalskarpathos6368

    Hi.. i Have the same issue and I am doing all the steps as you mention but still my connection gets lost very often.. ID3 do you recommend something else ?? Thank you

  • @dreamsofhaegum
    @dreamsofhaegum Год назад

    Perfect. Worked first time on my ID 4. Thank you for posting the fix.

  • @cez8017
    @cez8017 Год назад

    Thank you! It helped.

  • @mohamedhasanalhammadi6392
    @mohamedhasanalhammadi6392 Год назад

    It’s working thanks buddy 💯

  • @andrewjoy8364
    @andrewjoy8364 2 года назад

    Many thanks for your video. So far we‘ve not had this issue. And it‘s great to know what to do if it does occur.

  • @user-vr2kj6wr6o
    @user-vr2kj6wr6o 2 года назад

    Подскажи пожалуйста надо просто вытащить на 5 минут предохранитель и обратно вставить? Я просто не совсем см понимаю английский язык.

  • @paulbritton9758
    @paulbritton9758 2 года назад

    Thanks for this. For my right hand drive ID.4 the fuse panel is behind the glove box, a bit fiddly to remove, but the fuse is in the same position and the fix worked for me.

    • @gerryheery1388
      @gerryheery1388 Год назад

      I'm having this issue what number was the fuss mine is right hand drive (ireland)

  • @dotlink
    @dotlink 2 года назад

    Works a treat on my id3 2021 Pro S!

  • @mahmah3000
    @mahmah3000 2 года назад

    Is car service working on WiFi?

  • @mohanparson4589
    @mohanparson4589 2 года назад

    Perfekt. 1000 tak

  • @Lingkxs.83
    @Lingkxs.83 2 года назад

    Worked on my ID3 in 2022. Thanks.