Видео

Lovely jubbly 👌🏻

Thanks to Sharpey for the vid, I don't have an angle grinder so did it a different way that worked really well. 1. Use an 8mm drill bit to drill down about 5mm into the socket of the bolt 2. Tap the T50 torx bit in with a hammer 3. Loosen off with breaker bar - don't use impact gun until loosened 4. Zip out with impact gun Worked perfectly and saved me a ton of time doing the opposite disc once I worked this out! Going to make a vid but thought I'd leave this here.

Great vid, but my bolts just will not budge using this method. So now trying to cutting heads clean off with grinder

Any ideas? Having a major headache with a mk6 sump, tried using liqui moly silicone sealer, kept seeping through, bought new sump and liqui moly another 2 times, still seeping. Bought the gasket in the video and now can still see the wet oil appearing through, no stupid stuff being done all torque evenly. Appreciate any help👍

Great tip there bud! Done this job a few times and been pretty lucky. Great work pal

Great tutorial, I'll be trying this next week

Same issue but one torx has bit stuck in and the other one is cut off at the head so just thread left in the hole. Can I just cut the inside of the hub off with a grinder? I can’t get a bit long enough to drill them out?

Thanks for this - very well presented.

thanks mate

مرحبا اذا ممكن قياس جوان سبي من فضلكم شكراً

Magic, just what I needed thank you

fantastic, thankyou. Same thing happens on the workvan that I use every day & it's been driving me nuts. Thanks again & all the best.....

I've got the same problem and I've tried this but still not fixed! Any more ideas? Thanks

Just doing mine (discs as well) - my hub nuts were literally finger tight! Had no bearing play, recent MOT. Most odd

Brilliant.. just brilliant!

Anyone experienced getting a new bearing with shorter torx bolts supplied than the originals? I bought a cheap bearing and an expensive one and both had torx bolts 10mm shorter than originals. Seems a bit dodgy with 10mm less.

Brill!!! Literally what I needed, been putting it off for weeks, you've made it seem so easy thanks to your clear communication!

Good morning, its nothing near a short circuit. You are witnessing EMF backfeed die to a high resistance on the earth which causes the flow to backfeed up cables that are normally live upon action. The electricity escapes down anything it can which is why lights "trafficate". Please don't call an EMF backfeed a short circuit. The EMF doesn't like it. You wouldn't like anyone calling you by a name that isn't yours . Stay well, stay seen. Signed A vehicle electrician

Mechanics worst nighmare, and ford knows that. Its a conpiracy theory 😮

For cutting out the bolt holes, put a ball bearing (larger than the hole) in it, and hit the ball bearing.

So I'm guessing the bearings are lubed by the diff oil. Did you put a bit of grease on them for the initial lube.

Just an update. I had the same problem as Sharpey, used this to fix it. For the next wheel, I tried my own method - do this for each bolt and it will come off very easy : beat up the bolt with a long bar through the hole, clean it up with a tiny screwdriver inside so that the bit fits perfectly, beat it up again with the bar, then put your bit in and beat it up with the hammer while its in (not.too hard, just normal taps), then undo it the normal.way. Comes off no problem. Took me 20 mins to get all 5 off, works a treat!

Brilliant thanks for this! And your drop link change, saved me ££ by doing it myself. Do you how to get driver side electric windows, back on the runner. Someone broke into my van and smashed window . Got replacement in but can't get it on the runners

Thank you very much, my tprx snapped into the bolt today so ill have to use your method to get it off. Great channel

Thank you for sharing your process 👍😆

Great video thanks 👍🏻

GREAT JOB. What transit model is it?

Still looked a crackin job you done👍👍

Thanks sharpey, I diddnt spot the paper gasket you mentioned, which part is it? Many thanks

I know it's a couple of years since you posted this but you have given me some inspiration to do the battered old work van that I drive. I think you did a pretty good job on that & you should be proud of yourself. I have just replaced the side door rollers & now they work like a dream. Thanks for the vid & all the best.....

I think one of mine has broke and snapped on my drivers side Would it do much damodar if I drove it for a week until being fixed ?

Back in the days, you'd use corn flake packet for free. Nowadays, you'd buy some of the same stuff.

Anti roll bars miles out on mines how’s that gett moved

yes mate i did that and the job was don so you are a top man 👍👍👍👍👍👍👍👍👍👍👍 thanks Gary from Crewe

i mate just seen your blog looks like i will have to do that as the Torx have rounded off but my disc are 12 month old as i got to do the bearing so this is very help full good blogs as all ways Gary from Crewe

Just a tip. Should of tried leaving the top on and undo the bottom first.

Bet dad does most of graft.

Love your style. I will be watching to learn a thing or two

I noticed yesterday that one of the wheel studs are broke and I have 4 out of 5 bolts on the wheel.. Makes me wonder if owt else is damaged in there.

I've got just same problem ,but bolt is the bottom one...happy hours .Thanks Mate to show this solution

Do you need to apply wheel bearing grease?

I couldn't undo 3 torxs last time. I drilled them off. Takes around 5 minutes for each one . I think it's better to buy 3 new torx bolts than new brake disc :) Still, transit brake discs is a pain in the ass!

Did you try hammering in the next size up torx bit the 55 or maybe a spline drive bit?

Mate this is gold :) thanks for sharing !!

I hate rear drums with a passion. I try and avoid them whenever possible. I am doing a 2012 connect and can't get the new drums on.

Thanks and good video.

brilliant video buddy not looking forward to buying that big socket ,,,,......

My sump is okay free from rust etc I just need to change my gasket do you reckon I’d be able to do that without taking the oil pick up pipe off?

Straight to the point and easy to understand, going to go see if this sorts my issue out too, thanks for the video.

Nice video