Видео

I have changed my 3D mode to ATTI mode on my H1 by setting a value of 1400 to the 3D switch position instead of 1000, it worked but I have 1 issue and don't know if it's a normal condition, in all other filght modes swash plate is level in ATTI mode the left side cyclic servo drops about 4mm wich also tilts the swash to left roll. Is this a normal condition on the bench?

very useful information, thank you 👍🏼

Is the new model av4 version?

Just bought a FRsky x18. I am trying to set up a H1 unit to work with a new Align 450 dominator. Any help?

bq76930 can we do?

I had this issue on my flywing uh-1 v4 out of box. I thought it might have been a bad feather shaft yet It was a bad bearing on one side. I was going to replace the bearing but I went ahead and slapped a new head on in my spare parts and it resolved issue. Very true it’s quality control flat spot or something going on with the bearings.

My flywing uh-1 - same thing. Vibrated so much at takeoff that the cheap landing gear failed and it hit the ground. Factory said they never saw servo problems. Pshyah

I tried but dosn't fuction, maybe because I used a 60C battery ? too big..

thank you where can i get the program?

what does the 1000, 1300, etc even mean? can someone explain what that value indicates?

Did it do atti mode been trying for weeks

Fun fact for those curious. The H1 will work in 6G and 3D mode with NO gps

Hi, Where did you find this battery?

Either way I think the American helicopter manufacturers need to step up their game and produce a helicopter beginners like this because I don't see no American helicopter companies doing this and you comparing a professional helicopter to an amateur helicopter that's only meant to introduce getting into helly's so either way I hate to say it I don't know how to fly helicopters point me to an American helicopter that does the same thing and I'll buy it other than that if you can't kudos to China

Any way of getting in contact. I have some questions about this?

Hello,i am having an issues With My mavic pro battery. It's displays battery authentication failed 😢😢😢. Any solution?

Fast forward six years and Ali Express sells extra-range super batteries for the Mavic 1 Pro, the Mavic 2 Pro, and d the Mavic 1 Air, to name a few DJI golden oldies that can now fly waypoint missions covering over 13 miles, while aloft for over 30 minutes at 27 mph. These extra-range non-DJI batteries breathe new life into the older DJI models from the Phantoms to the early Mavics, whose range more than doubles in comparison with the stock battery's distance reach.

I keep getting blocked from installing the mod client on windows 10 or 7 . It says its dangerous . I have turned off all security in the browsers Chrome,Firefox and Edge plus windows defender . Can you help ?

Can you lift off in ATTI mode and while airborne switch over to GPS?

i think he just tipped it over and when he did it scratched the blades and broke the servo gear.

Hey CruzRoy I can't install NoLimitDronez Mod Client, it seems the .exe file gets blocked as a Trojan . I believe I have shut down all security . Can you help ?

I cant install install the ModClient it seems my computer can't find the .exe , it flags it as a Trojan and aborts the installation . Can you help ?

As an alternative, may I suggest you checkout "Black Tak". It's like Blue Tak but stronger and grips better. Easier to remove than hot glue and more flexible. Photographers use it for (expensive) camera equipment.

My security program says the NLD Mod Client is a virus and blocks it . Does anyone know what I can do ?

Hi Roy, Just going through your videos. I have to say they are excellent. I might have missed it, can you tell me if you changed the flick switches to colour-coded ones? Or are they just covers over the originals? 0:30 into your video. I'm in the UK.

I know this is old, but just came up on my feed. I’ve got my switches up GPS, middle ATT, and down 3d… I don’t really see the need for return to home, I never fly so far away that I lose perspective

where i can download TRB2300?

Ini yang aku cari, terimakasih

hi I have a question if you could help I bought fw450 v3 and everything works good I bought quick release for my blades if I lost the nut out in the field I'm screwed my problem is that when I go inverted and into normal the heli tail roator started twitching left or right I turned the tail down and now when I go inverted and normal it now does a 360 spin. Is your tail on 73% I can't see on your screen? Should I put it to 80%? I need some help.

I love how he says charge and apart! 😄

у тебе руки точно ростуть із сраки )))

Fried my ESC pluging in the little XT 30 to the battery, they can plug in incorrectly! (44:28)

hey, how do I order a 12000 for my inspire 1? really appreciated any help that's given.

Wo kann mann das downloaden?

Where do I find that software/ Thanks for the video.

Roy, Perhaps you can help. I have a Flywing Bell 206 with a tail motor problem. How can I get to the set-up page that indicates that the Motor is selected rather than the Servo.

Quite a departure from my JR 12X. But did not work out for me. I wish someone would just post a basic heli setup file that could be modified and cloned at will. 😢

Now that was painful, a screw by screw video that gave my fast forward finger a good workout

All this over a 14 dollar servo. Yikes

와주 멋집니다. 6년 전에 이런 것을 해냈군요 좀더 오래 머리 날리기 위해서 듀얼 배터리가 필요 했습니다. 나는 23년도에 에어2 / 프로2 의 듀얼 배터리를 만들었습니다. 24년도에는 3D프린트를 이용했습니다. 최대 40~48분 비행을 합니다. 저의 배터리도 확인해주세요 방문해 주세요

I have just recently purchased the quick disconnect and mine was very smooth in the rotation. It does seem to have smaller shims as the gap is smaller thatn yours. I would agree the pins look simple, but the engineering works as the centrifical forces will keep the snap locks in place while spinning, so I do not worry about that. My biggest concern it the small screws, but if I do not remove them, they will likely last for a while and at the durrent price of $45.00, this unit is cheaply replaces if wear begins. Thank you for your review so we all understand this part better.

Curious to know if you hooked it up to the app/software and checked the GPS connection there? How many satellites are you getting? Not sure if that matters?

Hey CruzRoy! Cool video. I’m having the hibernation problem with my spark batteries. I can’t find the battery killer software. Can you provide a link or point me in the right direction please? I opened one of my batteries and was able to get 2.8 voltages across the cells, but it still won’t charge. I guess I need to reset the bus! Thanks, PS. Did you say not to leave the battery on the charger because it will drain the voltage if it is not charging?

I want one of these could you advice me on how long the controller lasts with AA Batteries i have 1.2 Volt AA Batteries will that be enough im fully registered Drone pilot any advice of anyone would be nice many thanks 😊

Im new to this just a question have you plugged it into the computer 4 minutes thirty on seconds in. And do a custom calabrate change ive seen that if you plug it into a pc you can change settings it might be on maximum and you dont no its on maximum its just a suggestion

What is your charge (cost) to repair DJI Spark batteries ? How do I contact you ?

Hey Cruz, gotta link for the rubber stick? Thanks buddy!

They must’ve seen your video and fixed the tolerance issue. I recently got a set and tolerances a good now.

Top 10

Hi Cruze are you saying all the servo plugs in the H 1 should all be white to the top ?