Видео

Longest oil change ever

I've been in maintenance for 7 years this year. I love what I do overall, and my favorite area is machining! I took an interest in it (zero experience on a lathe or mill before this job) and I love randomly finding videos like this once in awhile. Liked and subbed!

You’re driving pretty fast buddy. And you don’t slow down for that BMW. It doesn’t matter who is right or wrong.

On behalf of BMW drivers - stop crying little baby. Nothing happened. You, your dashcam, and whatever P.O.S you drive are lame.

I use a Rotary Table setup in a 90* making Y-Axis passes with the Endmill & after machining a flat turn the Rotary Table 60*. Something like that....

Well they over confident too but they also could see all the lanes before approaching intersection, and on in intersection they saw where you at but anyways not stoping is violation if there no green arrow

Bimmer moved to the far left lane because you were driving fast without means of slowing down

Oh god, you get worked up by almost nothing. It wasnt even close, you didn't have to break, they didn't take your lane. All is well. I'm envious if that's the worst thing you encounter on roads

You need to take your meds, this is literally nothing.

Wow super close encounter

Please pour some water down them the stuff at the top is not an issue compared to half way down it gets clogged really easy

But why didn't you slow down? 😳

You didn't need to do all that man. That's the whole point of the firewall adjustment ...can tighten the cable there with ease.

I need the Amazon link for the thermal fuse

What is that squeak/squeal? Bad distributor bearing, engine bearing?

Is this the biggest problem in your life?

I live in Maryland, and it’s quite a contest between our states of where the worst drivers are. Maybe DC has us beat.

Happens a lot, it’s pretty annoying. The worst is when you assume they’re going to the other lane and maintain your speed, but they get in your lane and don’t even accelerate properly, so you’ve either got to slam brakes, or go around quickly. It’s so dangerous.

right turn to the right lane, always. Suggesting he turn into the left lane to allow you to breeze past on the right is awful.

He spawned in the middle lane

Even worst, they'll stop to look for traffic and just pulls into the middle lane the last minute. You have a big right lane you can use to exit safely ffs. Either Power steering just make people lazy to turn bc middle lane is so wide, you don't need to turn as much or turning full stop would ruin your steering rack myth still floating around. 😂

Half of what this guy does is totally unnecessary.

Does the fuse blow a third time or the fix is good? Thanks.

Best explained video out right now!!

The C7 2019 ZR1 is artificially inflated. Because the dumbasses at Chevrolet chose to only build the car one year and an artificially inflated the price. The car is not worth what they're selling it for

end of an era, are you planning on getting a new "fun" car?

was this car at cars and coffee?

Website is back up and running. They're now going the electric route, raising the price to $14,900 MSRP. whether or not they follow through or a joke.

Wow the end? I never thought I never thought id see the day, thanks for all the cool videos!

Nice video, about to change the oil on my 88! Thanks for the info.

Hi ya'all lost your money . Shades of Delorian here . Something for you to think about , VW had a 1200 CC boxer engine , so if you built one of these engines combined with modern fuel injection and electronic ignition , coupled to a VW IRS 4 speed transaxle in a lite 3 wheeled car it should get very close to what Elio had promised for MPG . This engine and trans can be in front wheel drive configuration no problem . And there are electric conversions for the VW Beetle for later on down the road . So in this configuration the Beetle engine would be behind the trans just like a normal beetle , so no trans mod's needed . The engine will be in the same place as in the Elio . How can this be adapted to front WD , simple , take a stock VW front axle , link pin or ball joint , adapt some F.W.D. VW Golf hubs . Oh you would remove the center section of the VW Beetle axle so it will fit on each side of the trans . There is a little more to do but not complicated . The whole build would cost about $6000. or less depending on the direction you go , new parts or used . Contact me if you like on Facebook . Paul Nolz

Looks really shit!

Just another A-hole driver. Happens in my town all of the time. MUCH, MUCH, MUCH worse crazy driving offenses here in Oregon. I cannot drive a solid mile without seeing something illegal.

Waaah waaah waaaah Someone cut me off

entitlement is the new mental illness

He drives a Cadillac, so there's not much you can do to "fix" him - he is already irrevocably broken!

all good things must come to an end

Hello Donating Horsepower, can I use this video in my compilations? Credited on-screen with a link back. Any updates? Where did this happened? Thanks

dang dude people are so high strung, I can just tell he's a snobby fellow. credit to you for keeping your calm, Ive seen other people get wild over that its crazy.

dang that sucks

The new generation of driving is terrible

Did this affect your credit in any way?

Where does the hose go on the part of the t connector that's broken

Did you figure it out yet? My 94 is doing the same thing. I’ve changed fuel pump, fuel filter, cap, distributor, plugs, wires. Also I smoked it for any vacuum leaks and found one at the egr valve. I haven’t had a chance to put the new one in yet to see if it fixes it.

What size was drainplug 1/2 inch or ?

Reservation holder. Hey, we're all full grown adults who can judge risk. Bringing a new vehicle to market is an incredibly risky gamble, fraught with many paths to failure. I would have loved to have gotten one, and figured that the risk was worth the potential gain. It's a shame that it didn't happen, and I think that Paul Elio wanting to retain complete control was the likely reason that it dies. Soliciting outside investors always involves having to acquiese to their wishes as well, and wanting to retain total control by Paul did it in. No way could he raise enough money on his own.

What do i adjust if i have a high bite point

He didnt take the spout out before he timed it. Timing not correct. This guy shouldnt be working on cars.

My distributer 1 on the cap is past the intake maybe like an inch to the left to what u said is perfect so mines way more retarded than yours and when i advance it, starts missing when i put the grey plug back in

And do i need to set my light at 10* so itll show me when its at 10*? Or timing light at 0? Edit mines got a mark on 10* on the balancer