Видео

Thank you! I haven't finished mine yet, I set it aside for other projects. I don't even like some of the music LOL! I primarily use RUclips creator music to help out the community and some tracks just don't fit the ambiance once the video is complete. Thanks for watching. Hope your kit is progressing nicely! 🙂

Did you use simply tacky to mask off the center part of the wheels?

Hi: No, I didn't. I usually use white glue or fabric glue to "seal" the fraying. I'll have to remember the hot knife next time. Thanks!

Thank you!

Hi there: Pocher instructions are the worst, every kit I've ever done, tbh. It's super frustrating given the price. I completed the Aventador in orange and had mixed emotions about it (the quality of the kit that is). I agree, a lot of plastic, but I actually worked that to my advantage and painted/airbrushed almost every plastic part which was a big improvement. Pocher often includes pre-colored parts without removing the mold lines and I'm reluctant to mess with those. For the Aventador specifically, so many details were missing from the kit and so I went all out and did has much detail as possible. Scratch built parts, carpet, wired, plumbed, etc... Probably my most detailed build; and I think it was worth the time and effort, but perhaps not the cost of the kit. Hope you are enjoying your Lotus build, will look great once complete and thanks for watching! Happy Modeling!

Hi there: I used white glue for the belt fabric and I did not have any issues with the decals sticking to the material.

Hi: The M1.5mm tap should work for "A" screws. I also use oil when tapping. Sometimes I will also oil the screw if it's being fussy. 🙂

Hi and thanks for watching. I do think the kit falls a little short in some areas (especially the instructions) which is frustrating given the cost of the kit!

@@splashbakermodelbuilding The staining on the side panels (parts DCA 5 & 7) appear to be from the oily plastic they are wrapped in. Mine were similarly afflicted, and I thought this unreasonable in such an expensive kit, so I brought the matter to the attention of Hornby Customer Services. They arranged for replacement parts to be sent to me but these were similarly marked. I complained once more and Hornby send me further replacement parts which had been inspected before despatch. I received them today and they are pristine. I was impressed with the service I got, but it did delay my progress on the kit by over a month. While I was waiting, as I was in possession of a couple of spare side panels, I experimented with them. The staining can be eliminated by over spraying with clear enamel and then giving the parts a good polish. It's not quite as good as the replacement parts I eventually received, but it's pretty good. I have also obtained detailed instructions by way of a download purchased on eBay, which goes through the assembly step by step and corrects any mistakes in the Pocher instructions. It also can be purchased with a set of parts for super detailing the kit. I am waiting for mine to be delivered and although I have progressed quite far in the build, I'm sure I will be able to use a lot of the parts to improve my model.

Hi there! It's a fun build, but some frustrations... Yes, I soak tires in hot water or as in this video, a hair dryer. I've had good results with both. Let me know if you get the kit and what you think. I pre-order their next one, the Porsche 917; I'm really hoping for some improvements in the instructions! 🙂

@@splashbakermodelbuilding Yeah I just purchased one from Hong Kong seller US$560 + $130 shipping just to good of a deal. So I expect to get it in about 1 1/2 weeks time. I started out looking at the Tamiya 1:12 scale 72D then moved and thought about the Agora Lambo Miura but the panels looked a bit off so I decided that might get corrected with a couple of production runs so I would hold off. Then watching your build I was like yeah that is the one. Have you done a Agora model build yet?

@@jbar100 Sweet! I hope you enjoy it. No, I haven't done an Agora kit yet, but I have been looking at them. I have the 2 big DeAgostini kits to get through and I pre-ordered the Pocher Porsche 917 which is supposed to be out in the summer, but knowing them, it will be delayed. I did pick up the Fujimi small scale version to get familiar with the 917. I didn't do much enhancement to the Lotus (it was my first F1 and not familiar with them), but I want to be ready for the 917. Keep me updated on your kit. It really does look great once assembled.

Hey there! I agree 100%. I was surprised how many details where omitted from the Pocher kit even their latest release of this kit (in yellow). I did put a lot of effort and time into this kit and appreciate your compliments!! Thank you! 🙂

Hi there: Check out the screw sizes on page 3. You will need a M1.5 and M1.7 tap. I bought mine on Amazon. You will need a micro tap handle as well and maybe a pin vise. As I recall, one of my taps was too small for my tap handle so I used a pin vise. Thanks for watching!

Hi & thanks for watching! I found a few steps tedious, but builds up into a nice model!

Thanks! Good to be back!

I've been having a little trouble setting it up, but I am trying! 🙂

Thanks, can't believe how fast time has gone by and so many kits to build! 😊

@@splashbakermodelbuilding Just glad to see you back.

Thanks, glad to be back!

Thanks! Easing back into it, feels good!

Hi there: Check the screw sizes on page 3. You will need a M1.5 and M1.7 tap. I bought mine on Amazon. You will need a micro tap handle and maybe a pin vise. As I recall, one of my taps was too small for my tap handle so I used a pin vise. Some of the screws are fragile so pre-tapping is recommended with a little oil. Larger screws seem to do fine with just oil. I would also recommend quality screwdrivers! Good luck with your build; it makes a nice presentation!

Hi: I replied to your other comment regarding the taps! 🙂

Hi and thank you for the nice note! I hope you enjoy your build. Most of my modeling has been WWII military, but have been branching out to cars and motorcycles. Another method I have used to soften the tires for mounting is to soak them in fairly hot water for 4-5 minutes until they are pliable and easier to work with. Obviously the hair dryer method works too. I was surprised how rock hard the tires were! I personally think Pocher should supply the taps rather than the tiny screwdriver that is useless. Some of their screws are very weak so tapping and/or oil really helps. I did have one screw break off in the part and was quite the pain to remove!

Hey there! Oh yes, I'm getting ready to get back to it. I can't believe it's suddenly February! Thanks for checking. I'm trying to decide if I should finish this GT first or the YZR and I have a pile of Tamiya kits waiting their turn! 😉

@@splashbakermodelbuilding I'd vote for the Ford GT

Bonjour et merci d'avoir regardé et commenté. Les tailles de vis sont répertoriées dans le manuel, peut-être à la page 3... Vous aurez besoin d'un taraud de 1,8 mm, 2,3 mm et 2,6 mm et d'une poignée de micro-taraud. J'utilise une huile claire pour les robinets. Si vous allez sur eBay US, il y a un vendeur qui vend le jeu de robinets pour ce kit ou vous pouvez acheter les robinets ailleurs. Ce vendeur vend également l'ensemble de détails supplémentaires. Heureux modélisation! 🙂

Hi: Yep; I realized my mistake soon after... 😔 I have done several Pocher kits and they all have awful instructions. Someone mentioned it was a breakdown between the master builder and the technical writer, not sure, but they are embarrassingly bad! Ok, that was my rant for the day! 🤐 Thanks for watching and sharing feedback.

Thank you! I appreciate the compliment; I really tried to elevate this build. Thanks for watching!

Hi: I bought the hose clamp set off eBay. Thanks for watching! 🙂

Hi: I was very disappointed that their latest Lambo kit was pretty much the same kit as before, just a different color. If nothing else, they could have added the many things the kit lacks. I would like to see the Terzo or the SIÁN maybe... Thanks for watching!

II can't wait until March or April... Then my Roadster will arrive with the new SVJ trans kit. only 35 kits are made by Tommaso from WordPress, so you can completely convert your Pocher Aventador into an SVJ with all the other high-quality details that come with the trans kit.

Thanks for watching! There were some frustrating parts, but overall, it's a nice kit! 🙂

Hi: I use BSI CA glue and the spray is BSI Insta-Set which instantly cures the CA glue when sprayed on. The overspray is easily wiped off, but also evaporates pretty quicky. Thanks for watching!

Hi: I usually use BSI CA glue, sometimes Loctite. Thanks for watching!

Hi: Yes, I did forget to add the flags! I'll have to go back and do that. Thanks for mentioning. 🙂

Hi: Good screwdrivers and a tap set is really all you need. Tapping the holes first really makes it a difference although it is time consuming. I used to skip the tapping and just use a little oil until I had a screw break off, some of the screws are quite fragile and it's a pain to rectify.

@@splashbakermodelbuilding Awesome, thanks...

Hi: I purchased the hose clamp set from eBay; a seller in Germany. I left a link in the description to the eBay (US) listing. Thanks for watching! 🙂

@@splashbakermodelbuildingI do enjoy your builds and thanks for all your information 😊 I hope you continue making them.