Видео

The federal law applying to refilling 1 lb propane tanks is found in 49 CFR 178.65. This regulation states that DOT 39 cylinders, such as 1 lb propane tanks, are not designed to be refilled and should not be refilled. Refillable propane tanks must be DOT approved and recertified every few years.

Here because my corn got stuck on Christmas day

16:47

show

Xt 500 ?

Voice overs are always fantastic especially when you're looking around

No yes sometimes somewhere

Recommended when you change a bulb you always change in pairs

My BIL is a mechanic and we could not get it on , which lead me to hear .

Wow its really good

Thank you!!! Your video is the only one that demonstrate the issue with turbine fix. I was ready to buy a new softener, as non of the other videos address this specific and common problem. I didn't relive water pressure, and broke the black clip. Only after I realized that water pressure was making it difficult to remove it. Thank you!

Thank you for sharing your knowledge

you're a cheat! Your filled up of vinegar wasnt in the same place at the end of your video! Boooo!!!

Breakcleaner is highly flammable folks

thanks for the info! will try this - before I dismantle it to get at the line.

Thank you so much for your video and showing us your alien key trick it was a huge help

I believe the pcv valve is incorporated under the top of the valve cover and you have to replace the valve cover. I'm speaking of a 2003 Saturn ion Quad coup with the 2.2 ecotec engine.

What magnetic plug did you get?

For clarification, all power inverters are sine wave, it means they produce 120volt AC (alternating household current). There are 2 types, Modified Sine Wave, good for anything except sensitive electronics like a laptop or some electric motors pretty much. True Sine Wave like he bought, which is much cleaner power & electronics safe. True Sine inverters are more expensive and heavier because there is more to it. Hope this clears up any confusion 🙂

HOW DO I MAKE THE PADS OR PADS STAY ON OR FLASHING?

Much respect to you, thank you

Hi, do you have a video on how to service the valve body, can i turn it by hand from the motor gear?

TRUMP WON

Yamaha xt250?

I have a water softener and I can’t free the valve unit from the canister. I’d like to change the beads in it but just can’t seem to free it up. Do you have any ideas as to maybe what I should do?

Thanks. I thought I could snake my way to the bulbs from the back but there’s a bunch of metal and stuff on the way. Saw your video and I had a gander around and saw the little screw for it. Thanks, I had forgotten how to change those bulbs.

😮 sick tail light

Put the tire back on turn tired by hand while turning the tensioner

There is a release valve on the top of the 1lb tanks. If you think it is over filled just leave it outside in the sun. The valve will open until the tank is at the correct pressure then close. Once closed then weight it. That will give you the complete weight of full.

2024 and I found an angel. No idea how you figured out the port 170/171 perormance but I'm not complaining. I'm subscribing.

What in the fucks name that noise is??

Thank you sir, exactly what I needed!

Is there a way to set a pattern on the P4 without flying to the spots to do waypoints ??

Great video but next time , please lower the music volume.

Thank you so much!!! Video helped out!!!

Should probably never use a steel sledgehammer bare on aluminum engine components. Use hard rubber mallets or foam to cushion blows

They must be heading up north to escape the US during the upcoming Thanksgiving holiday...

I know it's a easy job I just got to see the boats

This lowered my blood pressure today by a few points! Thank you!

You should learn to use your signal lights. People can't read your mind. Stay off the highway if you're scared.

Thanks! Just picked up a new XT250 this morning. It's WAY different from my F900XR and Zero SR - in a good way. I got it primarily for off pavement, at which I'm very much a novice. I think it'll be great for that. BTW, the only two times I've attempted water crossings on other bikes I've ended up needing help getting my bike out. So yeah, I would have turned around. Esp. as I most always ride alone.

Que líquido utilizan para pegar alas bandas

This fixed the problem with my 1996 425 - Run air at 60-75 psi from fuel filter connection point through the carburetor.

You just saved me a couple of hundred bucks so I could get to a drive belt that had fallen off. Thank you so much!!!

That will work but the right tool is much easier for 20 bucks 😊

i have a 96 dakota 6cyl 4wd. where on earth does the negative battery cable hook up to??

very useful..thanks

Thanks...good info on the XT. A couple suggestions after tinkering on my bikes for 20 years. 1) Taking the weight off that rear wheel will make any adjustments to the preload easier. 2) Removing the shock unit on this bike is in fact very easy and a good way to go. While it might sound difficult, it is not. I know because it is the same setup as on my WR25R and I pulled that shock to send it in for new valves. You don't need any special tools. If you have a socket set and wrenches you are good. (Besure to get the weight off the wheels but support the rear wheel because the swingarm/wheel will drop down once you remove the shock bolt). Learning how to work on your bike is one of the joys of riding. And just like a trail that looked scary the 1st time, a couple times down it makes it seem like nothing. Wrenching is the same. A good XT suspension vid (front and rear) is on the MixedGrid YT channel

Where's the cup that you put in the corner gone

Great video, I got amazing results using additional grits, I used 3000 and 4000 and used the meguiar polishing compound instead and left the entire thing truly looking like new. Hopefully the UV block can truly withstand South Florida sun