- Видео 24
- Просмотров 79 661
Roman Rudenko
Швеция
Добавлен 5 мар 2013
Cutting board from "bad"wood. Don't judge a book by its cover.
Oak with rich texture.
Sometimes gold can be right under your feet. You may find cheap pieces of wood wich you can flip to something nice.
Almost no waste with this method, however, remember that the board can warp, control moisture and check everything.
My instagram : insta_roman_rudenko
Sometimes gold can be right under your feet. You may find cheap pieces of wood wich you can flip to something nice.
Almost no waste with this method, however, remember that the board can warp, control moisture and check everything.
My instagram : insta_roman_rudenko
Просмотров: 533
Видео
Makita 2012NB full maintenance, Helical spiral cutter head upgrade.
Просмотров 11 тыс.Год назад
Helical spiral cutter head : tigertoolspro.com/product/helical-spiral-cutter-head-for-makita-2012nb-thickness-planer/ Router bearings: en.remlagret.se/products/6200-2rs-skf-kullager-10x30x9?gclid=Cj0KCQiAi8KfBhCuARIsADp-A5462JGhhVTpGLPPkNPmz6v7OpSx_Egt1KRFOZuETbrmc492H4gEfVQaAjYrEALw_wcB Head unit bearings: en.remlagret.se/products/6202-2rsh-skf-kullager-15x35x11?OrderlyEmails& Лицензия Creativ...
Extra Large Cutting board
Просмотров 1623 года назад
Materials - selected Oak. Size 400x600x35. insta_roman_rudenko Лицензия Creative Commons Attribution 4.0 на использование трека Easy Lemon 30 Second (исполнитель: Kevin MacLeod): creativecommons.org/licenses/by/4.0/ Источник: incompetech.com/music/royalty-free/index.html?isrc=USUAN1200078 Исполнитель: incompetech.com/
Wood , epoxy , butterfly....
Просмотров 2063 года назад
I found a dead butterfly this spring. I decided to immortalize her beauty. I had leftovers from previous cutting boards so i made end grain boards.
Cutting board - classic Oak
Просмотров 2683 года назад
Simple but very practical cutting board with good durability. Material - Oak
Magnetic knife holder #2
Просмотров 11 тыс.3 года назад
Stand for 4 knifes .Rare piece of birch as base for holding and oak at bottom to make solid and heavy base. I use neodium power magnets 10mm.
Oak cutting board with beautiful texture.
Просмотров 1,2 тыс.3 года назад
I had a piece of oak plank with a beautiful texture. I wanted to highlight the beauty of the pattern.
Great tit nest boxes
Просмотров 1603 года назад
Soon is nest period and i made few bird houses . Best material is natural wood , don't need to plane it. Don't use any paint or toxic materials . Original Great tit footage : ruclips.net/video/meTo2kdAsGc/видео.html&ab_channel=WildlifeWorld
Pike trap from vitamin jar !
Просмотров 2563 года назад
Compact and lightweight ice fishing trap for Pike . Easy to make , perfect for lightweight tourism .
Evening sunset by the river
Просмотров 573 года назад
Fond memories from last year. November 2020 I decided to meet end of the day with a fishing rod in nature. I caught several small perches, a big one fell off but i was very pleased with my walk. What a wonderful evening it was. Can't wait for the new season.
Magnetic knife holder
Просмотров 10 тыс.3 года назад
Material - patterned ash. Main goal for me to show natural beauty of unic pieces of Ash. Works perfect even with heavy knife , i find good balance with magnetic power. I hope you will like it. insta_roman_rudenko Лицензия Creative Commons Attribution 4.0 на использование трека Noel (исполнитель: Audionautix): creativecommons.org/licenses/by/4.0/ Исполнитель: audionautix.com/
Dough rolling board
Просмотров 5863 года назад
Biggest cutting board what i made so far. Main side for dough. Bottom side for meat. Material is birch. Size 900x580x31mm Was very interesting experience for me.
Laminated Yakutian type knife from scratch
Просмотров 1054 года назад
Laminated Yakutian type knife from scratch
End grain cutting board diamond pattern
Просмотров 3,4 тыс.4 года назад
End grain cutting board diamond pattern
Very Simple Wooden Jewelry Box | Easy to make
Просмотров 26 тыс.4 года назад
Very Simple Wooden Jewelry Box | Easy to make
Cutting board with a beautiful natural pattern.
Просмотров 1274 года назад
Cutting board with a beautiful natural pattern.
Great but expensive
good vedio,thansk for your share, we are supplying the 2012 NB helical cutterhead spiral type from China.
Great video. How would you compare the Makita to cheaper models like the Metabo or Triton? Or vs more expensive ones like IGM or Shinko that already include a helical head?
Hello ! I don't see the point in buying a Metabo, the price difference is not that big. Makita + Hellical is expensive (I bought Makita 7 years ago). Perhaps there are good offers on the market now in this budget with good blades. Get a good one, it will serve you well, and it will also be easier to sell if you want to upgrade. Best regards!
@@romanrudenko1614 Thanks! Just a comparison here in NL / Germany, Makita is 650-700 and Metabo is 400-450 so quite a difference. Also IGM with helical head included is 1000. Build quality on Makita does seem a lot better, also it is 10 dB less loud!
Great video.. thank you 👍❤
Роман привет, в верхних отверстиях тоже магниты?
Привет , на верху просто визуальный маркер для того чтоб было видно куда ставить ручку ножа. По вертикали магнит который держит лезвие .
very nice upgrade. On the USA seller do you think they just resell the Aliexp stuff or the actually make it ?!... price is similar on Ali.. thanks
Hello , its can be same manufacturer , mine package came from China... But im very satisfied with quality. Even from video you can see its rly quality made part, most important for me - it works great .
awesome video buddy, thankyou!! about to upgrade mine but will order a motor bearing set now as well, cheers.
What type of wood is this I cant find it in the comments or video. Birchwood? I would like to make my own for my birchwood Miyabi knife set
Hello . Its Birch , if fallen tree stay some time in forest ( or moist inv.) mushroom bacterials can affect wood , then it will makes patterns. If you want to find one - check local spots who works with birch fire wood , usually they keep birch timber outside , check bottom side.
Great video ! It looks like the cutter head is a spiral cutter head, not a helical cutter head. An helical cutter head has some angle to each knives. Theoricaly the difference between the two is that the spiral cutter head have a great finish on softer woods and helical are better for hard wood. Have you noticed that since you installed it ?
This head have huge difference with stock one , work smoothedr and softer, less preasure to motor , also way way less chance to tear out wood. Unfortunately, I can’t compare them with other manufacturers, but I spent a long time choosing which one to buy and was very pleased with results.
Well done and thank you!
Merci! 🙂
That was really interesting, thankyou! I will be watching this again in a few years (when mine needs some love).
Роман, отлично получилось!👍
Спасибо большое !
А какая толщина магнита 2 или 3 мм? Понравилась ваша идея.
@@tvorchestwood Желательно брать магниты мощнее , хорошего качества. Тогда тело дерева будет толще между ножом и магнитом , риск трещин будет ниже. Сейчас в продаже огромный выбор неодимовых магнитов.
Благодарю. Учту!🤝
The link to tiger tools pro goes to porn sites 😒 do you have another link?
Do you make these? How much are they?
Yes , its my own work. Selected pieces of nordic old Oak, small ones around 30euro , big one 60. Price is bite , but self price of materials wery hight. Also premium sending and polish on them. I use top quality send paper.
Cutting boards
This is a really helpful video. Thank you very much for making it.
I looked at the Helical Head and man is it expensive! $489.00. I am guessing you know this. I am interested but I also I am in Chile South America and I am thinking that maybe the company is not in the former USA and my browser is not translating well. Well thank you kindly for the video. Jim in Chile.
Thank you Jim ! Yes it is expencive , true! But im not regret after installing ( im very limited with money) Original set of blades will coast around 10% of helical head unit and you have to change them time to time , in long run its very good investment . Also its another qualitty of planing . P.S. Dont buy cheap spiral heads , its waste of money .
I loved the video so much I subscribed. Thanks from Chile. Jim
Great Job, many thanks to show it. Seems I was sleeping during the dismount process and now I am unsure where the longer and shorter springs at the Rollers take place. Inside 2012NB exploded drawing there is at every roller a longer and a shorter compression spring on each end. I would have expected that every roller has two springs of the same length. Maybe the longer ones at the entry roller and the shorter ones at the exit roller. Can you remember what is right? Best regards
Hello , thank you ! At 2:53 we can see that Front Right spring is long , also she marked with white color , try to instal Front Left - short | FR - long , after that measure parallelness between roller and bottom , if everything is correct try same on second roller with paralel check . Best regards!
Hello Roman, thank you for your quick answer. The parallel check is a nice idea, but I think screwing on the metal covers (Item # 52, 62, 82, 89) will pressing the roller bearings flat to the housing and this is independent from the length of the springs. At the end the longer springs are squeezed more then the shorter ones and the roller will be parallel independent of the used spring length. Where is the point I did understand your idea wrong? Best regards!
Salute , i just check info - from left ( side where chain ) you need to install short ones , they harder its made special to absorb extra vibrations from chain.Right side longer , they softer and marked with white color. Best regards!@@Howie656565
Thank you Roman, you saved my day 😊. All the best!
Fantastic job.
Ром, привет. Сколько по времени у тебя занял весь процесс?
Сергей , привет . Заняло примерно 6-7 часов с учётом того что я снимал все + делал первый раз. Без "работы на камеру" можно сделать в два раза быстрее. Не бойтесь потратить время и деньги на вал. Вы потратите больше сил и средств на обслуживание и замену оригинальных ножей, самое главное - совсем другой уровень обработки, больше не мучаюсь с фатальными надрывами на свилеватых участках. Так же меньше нагрузка на рейсмус. После приличного времени эксплуатации я однозначно могу советовать замену вала. Удачи вам !
Скажите пожалуйста где можно купить такой вал на Makita???
Я заказывал тут : tigertoolspro.com/product/helical-spiral-cutter-head-for-makita-2012nb-thickness-planer/
@@romanrudenko1614 спасибо
Great video ! thank you. Can you please explain why you also changed the rotor bearings? the helicalhead manifacturer reuses the originals and does not put new ones in the rotor. di you need to do this step? thanks again.
If you have opened the motor for inspection and lubrication, I advise you to replace the bearings. From factory they are "made in china" .... and after several years of work .... Lubricate everything well and put SKF , its not expencive and easy to replace. Machine will work smooth and nice. Best regards!
Great! Thanks for share!
who tf is keeping their knives out exposed to dust and moisture?
Who tf thinks a knife block protects knifes from dust and moisture?
Me!
Great job Roman! Do you may recall EU import duties and taxes paid on top of the net cost for the helical cutterhead? Thanks and keep up the good work.
Salute , yes ! Tax strike me hard - state send me bill around 80 euro for this package ... But over all I am satisfied , my goal was to go for quality spiral head and i get it. P.S. Nowdays its many new options on market so i recommend everyone who want to buy 2012NB+ head ( its around1500 euro) - check what you can get with helical already .
Link us your Al'ar !
Poggers in the chat, PPC !
@@romanrudenko1614 Excellent choice in screwdrivers! Or should I say Gyromatic Micro adjusters?
@@samwise2275 Its my favorite toolbox from the bottom of Lake Everstill. Thank you man ! KEK.
amazing lids! I'm scared to glue miters, because I live in tropics, and I need to dovetail everything, otherwise it would disintegrate overnight.
beautiful PS I'm guessing you only have 1 knife :P
is there anything you cannot do my friend? thanks for the valuable tips on heat treatment, and I didn't realise we can forge the iron using just charcoal, I thought I had to buy some expensive forging oven. PS for a moment I thought you wanted to butcher the dogs with the new knife and grill them [that's how bad the jokes are where I come from]
man, you are really are a perfectionist. I can't understand how come your channel has so few subscribers. just wandering if 10mm magnets are strong enough, some knives can have some heft to them. I'm thinking of a similar solution to hold my Japanese chisels, but I think I'll use stronger magnets, not to risk shooting myself in the foot with a chisel.
Need to test on asembling , but now days its a lot of "super strong" magnets on market so its easy to find what fit to your needs ! P.S. Thank you for great helical head man !
you are an absolute PRO and champion. your Makita is 10x better than new. the way you treat your tools is something we all could learn from. your instructions are so precise, that you couldn't do it any better. just WOW!
Thank you !
👍
Is the block heavy enough to stop pulling it over when releasing knife?
Yes , and magnet force is to low , you ajust and test it.
Nice work! What is the purpose of the round inset? I assumed that your logo would go there but that was not the case. Thanks!
Thank you ! Round inset its only to make touch of decorate . I like to experiment with design .
A really beautiful piece. I love the spalted wood. Small point….it appears that your fish decoration is upside down. Great work!
Do you sell these
I do for a gift, but I plan to make a few holders in December for sale, I can tell you.
Please do I’m having my mom some Knives made for Christmas. This would be perfect.
what was the finish you used?
Hello , i use "Festool heavy duty" oil , its very good product . Dont forget to remove leftovers to get smoth finish. Best regards.
😃
From South Africa-beautiful piece of wood.would struggle to find birch in Cape Town. 2 Questions: What oil did you use? What distance between knife and magnet? I'm struggling to get a definitive answer from a supplier. Planning to use wild olive which is a beautiful wood but as dense as a railway track.
Greetings ! I use "Festool Surfix heavy duty" oil. Its a good product , i can reccomend it for sure. Distance between knife and magnet is depends from 2 factors - power of your magnet and weight of knife what you will use . I strongly recommend you to do "drill" test on wood scraps ( i do it usually ) for my magnets its around 2.5-3 mm. from knife. Best regards!
@@romanrudenko1614 thanks for that.
I have a substantial collection of folding knifes, from various Spyderco and Benchmade to Atisan cutlery and Kershaw, and since now I'm holding them in various drawers and plastic boxes, I was thinking about building some kind of a holder/display case/mount for 10 knifes I use most frequently. My idea was to take a live edge piece of plank 1 m x 1 m x 7 cm and make some sort of cutouts with a router that would fit a knife. When forded these knives are around 10x5 cm. I was thinking about carving around 10 of those from the oak plank, smooth it out with a router bit and sanding paper, paint it and voila.. Maybe some kind of short 10 cm legs for the plank to stand on at a certain angle would be cool. Oh yes, did I mention that I'm a complete woodworking novice and I don't own a router, table saw, planer or any of that fancy stuff. I have a press drill, drill driver, some hand tools and a lot of sanding paper... I almost forgot. I don't have an orbital sander either to smooth out the surface, let alone a planer. I'm planning to buy the most basic hand held router for this project so I would be thankful to the grave if you had a go with it and make something like this with a simple set of tools.... Thnx...
It's a great idea. There are tonnes of "how to" videos about the magnetic/block holders for kitchen knives but maybe 2 about the folding knives. Folder has to be on display to be admired too but at the same time easy to reach and take one out. Of course there has to be some beauty beside the practicality.. Give it a go Roman..
Simple, yet, effective and elegant - Thanks for sharing
Great video
Very cool!
beautiful
Beautiful job
I imagine most of the people who end up in the ER with machinery accidents are confident in their ability with the equipment. Taking a few extra moments to do things safely is the way for me. Even with that "things" still happen.
What a waste of time and wood . So sad !!!
I love how it looks and the process but based on how you placed your knife there your magnets barely hold it in place.