Видео

Glad you liked it!

That’s a good one 😂

I would I check the fuse, I believe it’s in the back of the unit, could be bad. Otherwise yeah sounds like it could be bad.

Yeah I do because I have not installed the external mic, did you install yours by chance? I hear the one built into the unit isn’t the best.

I did as well and found with my iPhone, there was better call quality when I plugged in via usb vs Bluetooth.

Sorry, I do not, thats very odd.

Is that the one you got?

Do you have an iPhone? Sometimes I have to connect manually from time to time but not everytime.

Didn’t realize they had a newer model for this unit, that’s pretty cool. I do think moving the Tstat like the way I did helped, and since the Tstat I wiring is a very simple two wire design, I could actually cut the wire and extend the Tstat to anywhere on the room, the splice if done correctly won’t affect it. You can also put the unit in a lower fan and heat setting once you reach temp so it doesn’t short cycle as much. You should be just fine using a dryer cord, I’m glad you paid a pro to do all of the electrical parts.

I don’t see why you couldn’t do that, that’s a great idea.

@@D_Spear Awesome, thanks !

I did this by following this guy’s video. ruclips.net/video/_GW0A8HEyc4/видео.htmlsi=_OIgHEKiFdXGHqqy It’s a pain to remove if you don’t have the right tools, but I was able to have the two sets of cords meet in the passenger side of the center console and tucked them back in. I went with a USB-c cigarette plug connection to future proof my car down the line.

Did you click on the link in my description? If it’s not coming up still then it may not be available in your county? I am based out of the states. Thanks for watching.

I did not install the external mic, I honestly don’t like the look of it and wished there was a way to make it look more OEM. There probably is an aftermarket mic that can be used for this purpose but I haven’t tried it yet. As for the gps antenna, yes it’s installed but I really don’t use the gps or need it as I use apple CarPlay. The reverse camera does turn on even if the camera isn’t installed, there might be a way to turn this off if it’s not installed. Might have to look into that myself, thanks for watching!

Thank you for watching. Yes, I know how to fix that actually and it took me some digging to be able to figure it out. I will be releasing a video soon about this topic, along with other tips and tricks. Let me get back with you on this comment by end of day and I’ll tell you how to do it on here.

It’s not where you think it would be. Go to settings> car info >click on the tab on the left “version” . Then on the lower right click on “my car” . Then click on the lower middle tab called “app” . You will see a list of two items, #2 says “personal habits” click on the tab that says “learn” next to it. There you will find a set of functions and you press them on the screen and then the button you want it to act as.

@@D_Spear Thank you!!

Yes there is a feature that turns it off I guess so you can focus on reversing, kind of odd. I know you can turn it off though. Even the newer Eonon units do this still.

Awesome, it’s a great upgrade to have.

@@D_Spear is it better to do at Mazda dealer? How much do they charge to install back up camera? I have 2013 Mazda 3 has less than 50k miles but main problem is no back up camera.

Hey! I appreciate the feedback and no that’s a first for me! Are you sure it’s related to the radio? I know the pass seat does have a weight sensor and sometimes when there is just barely enough weight it can trigger the sensor on and off over bumps, I wanna say it’s like 30 lbs.

For this model I read it online somewhere and it didn’t say in the manual. For some newer Eonon units the password is in the manual.

Great question! Upon looking up on Eonons website it doesn’t appear that there are specs listed but I personally haven’t noticed it charging faster than standard speeds. I would think if it was a fast charger Eonon would advertise that, I think that would be a great feature on future models. Thanks for watching btw!

You can do it!

How did it go?

No it comes built in, make sure you have your WiFi and Bluetooth both on your iPhone, this is required for it to work. Then you need to make sure you have the hotspot function on the Eonon radio unit, after that you need to connect your iPhone to the radios WiFi hotspot, it should say android. Also make sure your Bluetooth is connected to the Eonon unit, I wanna say it’s just called Eonon. Hope that helps. It should have done this automatically

It’s all part of the main connector on the wiring harness, came connected to the Eonon wiring harness from the factory.

Did you double check your connections for the antenna?

If you have this model it requires the included WiFi antenna to be installed.

You probably need to install the gps antenna.

I haven’t looked into it but I did consider it. I’m sure you could do the same.

Sorry to hear that, are they not working at all? I would make sure the can bus box is connected all the way, it should be one of those little boxes built into the wiring harness if the unit.

@@D_Spear They were not working at all, I tried to follow their instructions to remap them, but they wouldn't even get recognized as being pushed. I sold my car last week for a speed3. I'm gonna do some maintenance stuff first, but I may look into the head unit again in the future.

are you connecting the phone via usb at the same time as bluetooth?

@@D_Spear it doesn’t matter if and how the phone is connected. After connecting Bluetooth, even the original music app on the head unit only plays through the phone call channel

Like a usb stick? I haven’t tried that yet but it’s been working with my dash cam that connects via usb.

@@D_Spear Yes a flash/thumb drive, I can charge from the ports but it won't recognise them to access the drive info

⁠@@adb1950I see, I’ll try it out on mine when I get home and I’ll see if there’s any tricks to it. I haven’t really messed with that part of it yet.

Glad it helped

Did you double check that your wiring harness is fully connected? Even the Eonon boxes that should be plugged in already when the unit came shipped out?

what model of eonon radio did you buy?

@@D_Spear i just got a generic one from ebay, but i figured it out. i had to wire the spare red wire on the camera feed to the reverse/back wire on the head unit and then had to splice the other spare camera feed wire with the positive wire on the power cable that connects to your reverse light. hopefully others see this cause i don't think other videos show that, must be a non eonon head unit thing

No I haven’t but the basic operation of a heater is actually very simple. Does the fan kick on and just no heat or it doesn’t do anything at all?

@D_Spear when we turn it off for a few hours and turn it back on, it'll glow orange for around 10-15 seconds and kick off. It won't turn back on at all after that. We hear it click when the temp goes above and below the set temp but nothing happens. I don't think the fan has ever kicked on either

I’d really need the wiring diagram to tell you where to look, these are usually a sticker inside the unit but if these aren’t meant to be serviced it may not have it. I might open mine up to look but in the mean time I’d turn the breaker off or remove the power, confirm that your connections are tight , that’s very important. If there is a loose connection then that can cause it not to work, also check for burns or melting in area where the connections are made. If there are any other splices for this Circuit then I’d check those spots too, like where the wire nuts are. If you are handy and feel safe with electricity, I’d also confirm there is 240v of power coming in. If you are not comfortable with any of this, then I would suggest calling an HVAC contractor, they can probably diagnose the issue but that would at least be a $125 service call.

@D_Spear I'll take a look inside and see if our connections are fine. I wired up the dryer cord for it myself and I'm not the handiest person but I thought it looked pretty good. For the rest of it the only thing I did was disconnect the thermometer to have it hang outside the unit. Heatstorm is sending us a pcba board to see if replacing that will work. We'll give it a shot I suppose

We just had an electrician redo our breaker box (it was a federal pacific which is recalled) and he ran our new 240v to our garage. Maybe I'll have him check to make sure it's actually supplying enough power. Thanks for the feedback!