- Видео 26
- Просмотров 1 516 548
patpatpat999
Добавлен 11 фев 2007
Logitech M570 Track Ball Repair (Left or Right Buttons don't work)
After a couple years, the left or right trackball buttons may fail or become erratic. This video shows how to repair. I you are comfortable soldering, you can probably do this. the part costs less than $5 (USD)
Просмотров: 222
Видео
Do You Hear The HU
Просмотров 2263 года назад
HU is an ancient name for God. It has been used for thousands of years as a prayer and sacred chant to attune oneself to the presence of God. Millions of people around the world have experienced the joy of HU.
Bali Cordless Blinds / Shades Won't Go Up (Retract)
Просмотров 64 тыс.4 года назад
This is a quick easy fix that works very well for me. The old "pull the shade out and down" trick does not work. All it does is that it may make your shade go up and down a little more smoothly for a short while.
Dal Bhat Power 24 Hour (The Song)
Просмотров 1,7 тыс.4 года назад
The one and only all original Dal Bhat Power Song. Videos are from a 2018 Trek on the Manaslu Circuit and Tsum Valley.
2008 Avalon HID Lamp Low Beam Replacement (10 Minutes!)
Просмотров 60 тыс.5 лет назад
This is an easy Low Beam HID lamp replacement procedure for a 2008 Avalon Touring. All you need is a 10mm socket and screwdriver. !WARNING! Bulbs sold on the internet for about $30/pair are usually counterfeit and won't last very long. Legit lamps cost over $100/pair. Replace BOTH lamps because if one is bad, the other probably isn't far behind. Also, HID lamps get dimmer over time so you might...
The Manaslu Circuit & Tsum Valley Trekking Experience
Просмотров 9225 лет назад
No Talking in this video. It's purpose is to give you an idea of what Trekking in Nepal is like. It is not a guide or a "documentary". I think you will enjoy. This Trek took place in the spring of 2018.
Bali Cordless Blinds Won't Go UP or DOWN (SOLVED)
Просмотров 276 тыс.6 лет назад
This is when you blind seems stuck. It will not come down all the way and will not retract. Use your warranty first if you can. This problem is a defect of manufacturing IMO. I ordered a house full of these blinds and nearly half of them have had problems.
Deployables Tales, Episode 1: IA And The Engineer
Просмотров 16410 лет назад
Deployables Tales, Episode 1: IA And The Engineer
Caldera Cone Stove vs GigaPower Comparison (Alcohol vs Gas)
Просмотров 2,7 тыс.11 лет назад
A quick comparison between alcohol and gas camp stoves for lightweight backpacking
How To Fix the Onkyo TX SR606 & SR607 HDMI Input Problem
Просмотров 440 тыс.11 лет назад
The COMPLETE procedure. Not just talk. How to fix your Onkyo when the HDMI input takes, 2, 5, 10, 20 minutes to show up on your TV. Or it maybe doesn't work at all with the HDMI inputs. NOTICE: The DigiKey part number is obsolete. The new & better part is PCF0G101MCL4GB (as of Dec 2022) NOTICE: The SR607 is almost identical to the SR606, so this procedure will also work to fix the problem.
Dyson DC17 Maintenance, Part 1a
Просмотров 21 тыс.11 лет назад
How to remove and replace the "P-Trap" on a Dyson DC17 Animal. Addendum to ruclips.net/video/pMT8h_OPO70/видео.html
KORG 01/W Pro Backlight & Display Replacement
Просмотров 67 тыс.11 лет назад
KORG 01/W Pro Backlight & Display Replacement
Dyson DC17 Maintenance, Repair, Belt, Beater Bar Replacement
Просмотров 165 тыс.13 лет назад
Dyson DC17 Maintenance, Repair, Belt, Beater Bar Replacement
ABQ Grant Middle School 8th Promotion 2010 Prt3
Просмотров 62014 лет назад
ABQ Grant Middle School 8th Promotion 2010 Prt3
ABQ Grant Middle School 8th Promotion 2010 Prt2a
Просмотров 48914 лет назад
ABQ Grant Middle School 8th Promotion 2010 Prt2a
ABQ Grant Middle School 8th Promotion 2010 Prt1
Просмотров 62214 лет назад
ABQ Grant Middle School 8th Promotion 2010 Prt1
Wagner Paint Crew Airless Sprayer Repair Part 2.mp4
Просмотров 220 тыс.14 лет назад
Wagner Paint Crew Airless Sprayer Repair Part 2.mp4
Hi! where can I get the display with the backlight to buy?
@@noelwilliams853 google “Korg 01w spare parts”. Good luck
I have a Bali cordless blind, basically the same as shown in your video above. The problem that I have and can't figure out is that on one side there are two lines, but on the second side there is only one. When installed, it is the top down counterbalance. Can you shed any light on how I remedy this situation? Thanks in advance for your assistance.
@@xterranation Sorry, no idea, I dont have any Bali blinds anymore.
@@patpatpat999 Thanks for your reply.
Throw the damn thing away! It's not worth the grief unless you have nothing better to do in your life!
Hi…where’s your Part 1 of the Wagner repair?? Thx!
the details of actually seeing it done are missing, that cap didnt just come off and the springs are not easy either
The spring has two sides with loop on the ends. Push the loops slightly forward then away from the bulb. That gets them past their catch hooks. The black plastic water tight cover also rotates ccw about 1/4 turn and then you have to let it sag low to get out of the pocket and clear the silver bulb connector and the metal of the inner fender
Thanks You so much
Appreciate the straightforward explanation and instructions. Thanks.
Thanks! This really helped me. All the part stores wanted over $100 per bulb, but RockAuto and Amazon had them for $26 a pair.
LEGEND!! This worked a treat, thank you! ❣ 11 years later - wow!😲 I've just replaced these capactitors on my Onkyo TX-SR607 and it worked a treat! All the HDMI's work again straight away without having to wait 20 minutes for it to warm up. Like others have said, on the SR607 the 5 caps are all on the bottom of the HDMI board and they are really easy to replace if you follow these instrctions. Using the piece of bluetac to hold the caps whilst you solder them is a master stroke! What a tip!! 😆 I'd have never been able to do it without the bluetac.. 🤣 I replaced mine with 16v ones from Ali Express which came in at about £5 (and I accidentally ordered 60 of them!, instead of 6). They were slightly larger, but in truth that probably made it easier to position them. Apparently they are 105c ones, but I'll not hold my breath.. 😅 My only remaing problem now is the OSD still doesn't work, but I'm going to try a reset and see if that does anything. The unit is definitely trying now because the screen flashes off and back on when I exit the setup menus from the LCD readout.
Enjoy. I still have mine sitting ina closet. I will be my workshop stereo at my next house
15 years (26 in 2024)? That is for choir boys. Mine has 32 years and still works, I'm going to change it now... because last year the LCD was fainting more and more. I didn't even know it had a battery, how could have one and keep working after decades? I just wondered if this fainting was irreversible and find out what the reason was.
I suspect the battery last forever if you leave the unit plugged in.
The LCD doesn’t fade, the backlight does. You should be able to find a suitable replacement, but the procedure requires you to tear all the way into the unit. I’ve done it.
Leaving the unit on causes the backlight to fade. It has a limited number of hours it’s good for.
@@patpatpat999You're right, the backlight fainted, but even so I think the new battery improved the perceptibility. Anyway, I've only been using the 01W for over more than 20 years as a mother keyboard. The first 8 years of its life were at home composing on it and performing on stage, intense; after that no longer I used internal sounds or the sequencer, it started a new phase of its life working daily but quietly in my studio
I’m gonna need a spelling on “Catywampus”. Am I close?
I wouldn’t know, but it looks good to me.
Worked well
Easy fix for me. Thanks for posting this!
Hi, I have an Onkyo TX-SR607 I should replace the 5 capacitors on the HDMI board, I can't find this PCF0G101MCL4GB that you used. Where can I buy it? Thank you.
Thank you so much I repaired it myself. We live in Hawaii and had mailed out other blinds .with the help o future and youI did it with my son . Impressed my husband and ourselves. Otherwise about 100.00 to mail out .Yeah
Need part 1 plz ty
What if the cord came out from one
Sorry, can’t help, dont have any Bali blinds anymore.
Sooo helpful! Thank you! A quick fix made even quicker by a well made video.
Do you have part one I have the same sprayer but it leaks from the top of trigger and can’t find a video on how to fix it
Sorry cant help. Probably have to buy a new gun.
i can t change comb to global and on the screen message we see 01/W MUSIC WORKSTATION is it the battery is dead thanks
Sorry, I don't know. Sold my Korg a few years back to a collector.
You could also not be pulling hard enough
dang my man you got that calm radiohost voice. stopped me from getting mad at these shite design curtains
I can only be angry so long before I give up and be calm
Será possivel arranjar um display da Boss DR-880???
Hello, I have the same amplifier. My issue is I am not getting any audio through the speakers or headphones. Everything else works, ie recognises audio in via optical/HDMI/RCA etc, and can decipher what audio format it is. Any ideas on what might be wrong with the audio output? The Audysey setup mic feature will not work either. Thanks
Stuck at the part where you have to use the screwdriver to pry out the pin from the fuse box
Dont have the car anymore. I believe it just pulls out. It's just an alignment point to hold the box in place till you put the bolts in, so even if you manage to break it, should not be a big deal.
I just did this on my ‘05 Avalon and put LED’s in place of the factory halogen (LASFIT 9006). Exact same process
I remember I used this video originally to repair my amp. Thanks again
Replace the capacitors on hdmi board with normal type not surface mount. 16v or 25v
totally fine also.
10 years old video but keeps on giving! I just bought a TX-SR606 from FaceBook Marketplace without testing first (shame on me). Lo and behold HDMI not working. The previous owner not only told me HDMI was working, but obviously attempted this same repair (shame on him!). I removed all his butchered soldering job caps and replaced with brand new as per this video. Worked like a charm! This video saved me $75, I know it's not much, but it's a matter of a principle. Thank you for great content!
Mine are wood so I didn’t mind using silicon spray. First I lubed the spring mechanism and that did nothing. Then I lubed anything that moves against something else. Some improvement but still needs lots of persuasion to go up.
Thanks, this was very helpful and my vacuum is back up and running! It was especially good that you did a close up of how to get the belt off.
The 607 is slightly different then the 607. I replaced all 21 capacitors on this board of the 607 and after that HDMI is working again. So, a lot of 100 uF SMD, some 220 uF and the rest is 470 uF. The little one on the 607 board, the 22 uF, wasn't in stock so did not replace that one and it seems not necessary to replace that one too, it's working again with replacing all 20 of the 21 capacitors.
Help! Does anyone have any idea what the generic item numbers for these capacitors please? I've typed in the C8002 type numbers and can't find a thing in the Digikey site as recommended. I can only find one that OP corrected in the description section of this video?
There's no such thing as a generic part number with electronic components, just generic specs. Here's what my latest search from DigiKey: www.digikey.com/en/products/detail/panasonic-electronic-components/4SVPB100M/7105156
Thank you
Fantastic Thank you!
Great video! Thank you
Amazing!
I got over excited and removed the rewinder mechanisms and now they unraveled and I am not sure how to reinstall them. Help!
Sorry, I dont have any Bali blinds anymore, otherwise I would take a look and figure it out.
awesome. thank you.
Thank you very much!
Thank you so much for sharing this information, I was stuck on how to get my sounds back
Thanks for your work putting this video together. Great work. The beach location in Washington State?
Garden Island, western Australia
Wow, jeesh, do I dare try this... Hmm
I wanted to see how to change the side filter.
Thank you so much for taking the time to record this video. After watching this I took down my large cellular shade across my living room picture window and was immediately able to see the problem. I rewound the string, put them back up and they now close like new. ❤
Love it ❤🎉❤
Wow, someone watched it. Hard to believe it's been 5 years already.
I have a TX-SR506, same procedure?
Cant say for sure. If the board looks very similar, I would say this has a good chance of fixing it. Just replace ALL of the same value caps per this video. Good luck
This worked for me. Thanks! Most expensive blinds I've ever purchased and worst blinds I've ever owned. With how tough these were to pull down, I thought for sure this wouldn't do the job, but it did.
I bought a few of Home Depots cheapest house brand, and they worked sooooo much better than Bali. They just didn't look the greatest.
I had the same experience recently (2 weeks ago), Installed them in 2018. They work fine, I'll do the dry lubiricate trick today.Thank you, Halloween is approaching! Have fun!
Great video..
Great vid.