Видео

Thanks for this video. Certainly helped me with my projector bulb replacement.

I wonder if you can replace a CPU in a HP Pavilion a6110n? Mine has an AMD Athlon 64 dual-core 4400+ and I want to upgrade it.

This helped me fix mine.

Great video thanks man !!!!!

merci

Thanks, helped me change the bulb !

Any idea what to do if the bracket screws are firmly stuck? (Looks like mine are even smaller than yours, difficult to find a screwdriver that doesn't slip out)

Thanks very much - really helpful 👍🏼

Thank you Big Daddy and Technology Boy for your tutorial. I believe you saved me $50.00 bucks since I replaced the bulb with your guidance. I hope you are happy and healthy crusaders for handy men and women the world over. God Bless America.

That's twice this has come in handy. I was thinking of upgrading to a 4K projector, but money is tight so I treated myself to a new lamp instead.

Thank you Sir! i replaced it, it is all cool now.

Sharp XR_10S projector LMP milrga kya

Lmp milega

JUST TO LET YOU KNOW THE HEAT SINK PASTE WAS PLACED ON WRONG AND ALSO WHY YOU PUTTING BACK THE HEAT SINK OLD DIRTY AND NASTY LIKE THAT, AND BY THE WAY THE HEAT SINK AND FAN DO DETACH FROM EACH OTHER, BECAUSE YOU WOULD BUY THE FAN AS A SEPARATE PIECE SO THEREFORE THEY DO COME APART THERE IS NO FAN IN HEAT SINK THAT ARE SOLD AS A KIT THAT ARE NON DETACHABLE. WHEN YOU PLACE THE HEAT SINK PASTE YOU ALWAYS USE THE SIZE OF A DIME AND THEN SPREAD IT TO A UNIFORM SQUARE SO THAT WHEN YOU PLACE THE HEAT SINK ON IT WILL EVENLY SPREAD TO THE WHOLE SURFACE, NOT THE MESS YOU DID.

Great video. Did the job.

Great video, very helpful! I was doing this and found a slight shortcut: for the two brackets that hold the bulb in place, you only have to completely remove one. With the easier-to-remove bracket all the way off, you can loosen the screws on the other bracket, and the bulb wiggles free pretty easily. It's still possible to install the new bulb, making sure to line up that notch that the video points out.

best video out there - thanks so much. Best tip was holding lamp and then slipping the cover over.

Does anyone know what the 2 cables that connect to the bulb are called? And the little plastic square connector they connect to? One of these cables shorted on my W1070 and I'm trying to find the part online but can't find it anywhere. No clue what it's called... does anyone know?

Thanks a lot! This was very helpful, all the best from Berlin!

You should always have gloves on and never touch bulb by bare hands. It will shorten bulb life if not.

Thanks Geezer, very helpful.

Thank you for the video.

Hi thank you for the guide I wanted to ask if you insert that same ram stick to the other slot do you have to flip it upside down since the pins are actually the other direction, is flipping it fine?

Does it matter which wire plugs to which prong?

Never use air to clean. I fukced up my projector because some dust came into lens chamber.

Is this the same as 2050 ? As i wanna do it my self but worried about finding instructions

Excellent video -- thank you! Really made it easy to change the bulb, and it worked perfectly!

Good morning, I state that I can not hear the audio of your video. In another user's video I saw that between the lamp and the external plastic door there is a sheet of transparent plastic adhesive to seal the lamp from dust. The person who made the video, removed the transparent sticker before removing the lamp and then, after inserting a new lamp, put a new sheet of transparent plastic adhesive to seal the lamp from the dust and then inserted the plastic outer door to close the projector. In the opening video, there is no clear plastic sheet to seal the lamp from dust. Neither before nor after ... Because? thank you

after watching your video i can now surely buy a projector for gaming......thanks buddy

Super tutorial, many thanks Kieran

Where do u get replacement bulbs?

Absolutely saved my life, thanks

Great video! I'm thinking about purchase a second hand one (same model). He sells it with an extra lamp (bare bulb) but i'm not sure if that bulb is original or not. Could you tell me the serial number and/or brand of the lamp or other information about it so i can confirm the authenticity of the lamp. Thank you very much!

I opened my projector lamp case to find the whole lamp had exploded. Glass is everywhere inside. What should i do When the lamp went bang it sounded like a flashbang grenade

ruclips.net/video/wOTyZ-50Ph0/видео.html Here is a video on how to do it with no soldering easy peasy too just use a bit of WD40 insteeqd of washing up liquid for a more permanent solution.

Thank you for the video! I would not consider myself very skilled when it comes to technical stuff but this was really easy. I used this lamp: www.amazon.de/gp/product/B00B8AMHT8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

This video completely walked me through replacing the bulb. Thank you so much. It went really well and i feel so great i did it myself (with your video!). Thanks guys :)

Thank you. Haven't done much soldering but your vid showed me what I needed to do. Again I appreciate it

subbed btw

Gonna do this! Thank you for the vid!!!! great explanation. I really appreciate it

Thanks for the video. I'm getting a new lamp for £28. Happy it's not £200 or more...

I'm from India and when I called up Benq repair center they told me cost of a replacement bulb would be around 200 USD. But I can see bulbs of my Benq model w1050 on eBay for $80. If I were to keep using my projector, do you think the bulbs will still be available in 4 or 5 years or so? I really don't want my projector to go to waste. And also do you think it's good to buy from eBay?

Thanks for the video....only thing to add, apart from using gloves, is to dispose of the old bulb correctly... they contain mercury.

Good video, thanks for posting.

Great Vid! THX

Same process for The BenQ TH 681/TH681+ Thanks for the video

Thank you.

Do not.. I mean DO NOT change bulb without cotton gloves. If you get oil on the outside of the bulb you shorten the bulb life length by half. I mean it seriously don't do it like this dude. Everything else is good only thing are the gloves he don't use.

Thank you for the instructions, they worked well for me.

I need to change mine, the red 'lamp' of death appeared last night!... is this one fine? www.amazon.com/gp/product/B01J5FNC78/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B01J5FNC78&linkCode=as2&tag=sbrs-20&linkId=75b2c68676daeb903795b2093527a358