Видео

Lets say I did everything in the video my pen is ready to be used, I decided to use my tap water to feed my plants and the water PH is around 5 in the scenario can I use the PH calibration buffer solution to change the PH level ?

I think you know the kind of plants 🌱 we want to grow in that can it handle it

Can you use this with the living soil beds from grass roots?

Its really cool to have a watering system that I can customize! What do you think?

Setting up AC infinity 6in in a 4x4 tent. Needed thus vid! Thanks

1:23 "C" for canopy.

is this 18 Inches in height???

Hey man, Just want to say I own the AC infinity 69 Pro, and have the tent and equipment you talked about. It has been so overwhelming for me to understand how I should go about trying to control the VPD, and your video made everything so much easier. Great work, and thank you for making this. Cheers

I’m going to start some og kush fem in my closet might have to get this for my set up I’m building

I got a very small growtent 2x2 and just need a little bit of ventialtion. Could you tell me if on the very low speed you can still here the fan since i need to be using it inside my living room near the bed room and how much wattage it uses on the low setting. Thanks in advance

I run UV 12 hrs a day. For the full 12/12. If i run in veg i do 12 hrs. Terpene production starts in veg.

I’ve done several tests with uvb with cannabis plants in flower. Here’s my take away. LED uvb lights are not effective in our tests. Our best results was with using 2 4’ 80w fluorescent fixtures hooked onto bar style led (680w) lights with proper uvb bulbs. The lights were best at 24-28” from the canopy. Here’s where it counts. Only started giving uvb for 10-15mins at the beginning of week 5 of flower right in the middle of the light cycle. Then add 5 mins every week till harvest. We had no lose of productions but our thc and terps shot up 25-30%. I.e thc would be 20% without and 24-26% with uvb. Drawback..cost for fixtures and proper bulbs are pricey. Really pricey. However, in a commercial environment, it gives a great edge.

746w pro hours oh shit its usa 12cent pro 1khw?

high quality neem oil, stickies and patience…dim lights till recovered, prune and let it grow out

Do I just burn everything and start again?

Looks awesome, I ended up throwing seeds just absolutely everywhere and we are really starting to see the abundance 😂❤

Are there any active discount codes? I’m needing to vent outside without using an AC unit and AC infinity has the perfect little vent system.

What about mushies

Idk you bro but cut your hair it looks horrible

I can’t wait I just ordered a Evo8 from yall on Sunday for the memorial weekend sale I’m stoked can with till it gets here

Thanks Joe Dirt!

It it only on the pro ?

Acinfinity has falsly advertised compatability that in turn caused property damage they used there customers as Guinne pigs and when something goes wrong they turn there backs on there customers don't advertise a product as compatible with 3rd part product if it's not compatable

I have two tents, I conducted experiments with 4 varieties, that’s it! absolutely 1000%! those that were grown in a tent with uva are stronger in strength than their sisters without uva! if you give it to an ignorant person, he will prove that these are different varieties)! They always work for me! and yes, the yield is smaller! choose weight or strength! I forgot to add the most important factor! Keep the temperature 20-22 Celsius no more! this also gives strength! I only have a mini air conditioner for tents! I need cold! Ultraviolet light is needed! combination!

O damn this is a great idea 💡 Micro greens 🥬 and flowers veggies and more sweet set up 👊🔥🤘

nice video. is there a recommend vdp setting for harvest?

I like it , and i would of been absolutely sold on this thing if the ppfd would of topped out closer to 500 . Especially for starting seeds and to keep from stretching. Also if it already had an ita own exhaust and humidity control. Like its own littld humidifier. I think they need to sell this as a basic and sell an upgrades kit as the " pro pad plus " 😎 with everything mentionsd above . 500 ppfd, its own exhaust and hunidity system specifically made for tgis parameters. Maybe a little more room in height . And then am optional route for co2 control and that would be freaking a must have !

How much ? Shipping to Germany?

Would this recipe be to hot for seedlings?

5:45 I especially like how the unit is fully "synchornized" at launch. That shows the attention to detail and quality from the company themselves.

Does it come with somthing to cover the clear front?

I'm putting that on my oh I need one list

Happy Hydro , is fantastic …. Ordered a pro plus when they had preorders. Ordered one from happy hydro , well aci delayed delivery happy hydro was very upfront on the fact it would be delayed, didn’t even mention it was aci’s fault just it had been delayed the anticipated shipping date , asked if I was ok with that , and mentioned that they would refund me if i didn’t wanna wait , as options …. Replied I would wait , no problem ,again aci changed the date of the pro + again they contacted me gave me both options again wait or get refund…. Very sincere and helpful …… so I decided I’d wait since happy hydro was so upfront… now I always check happy hydro before to see if they have what I’m shopping for ….. we need more companies with this kind of customer experience . Recently bought a aircube and was sad I had to go elsewhere…. But I think they only use grow @ce though …. Thank you Chris and Anthony from Happy Hydro ! Very pleasant to work with …. Oh I paid extra for shipping and they refunded it Since it was delayed and not shipped or arriving in two days …. However it was shipped priority when it did come .

Some day, I'm going to get myself one of these grow tents and give it a try. I don't have a green thumb so I'm kinda hoping the automation helps.

Mullet 😅

Thanks- fills a giant gap in AC’s documentation. For a very new company AC Infinity is getting so much right and one feature I don’t recall anyone mentioning is that at least the 69Pro+ provides for firmware updates. I have a 69Pro+ but I run my water/fertilizer off a cheap electronic timer because I can’t figure out how to do multiple schedules on a single port. In other words I want the pump to come on for specified time 30 minutes after the lights turn on. Then during the day run periodically for specified number of minutes each run until turning off completely when the lights are out. AC support seems to be baffled as to why I’d need such a schedule so with nearly $1000 worth of AC gear I control a vital function with $20 electronic timer that allows 9 independent schedules at 1 second resolution for each of its 2 outlets. It works but baffled as to why they can’t even say if or when such a schedule feature is coming.

Do you think this is the future of cloning?

I have 2 blue labs ph pen and 1 tds meter just recently got this like 2 weeks ago i thought both my blue labs ph pens were off but it was just one out of the 2 but its like 8 years old glad i got this for a back up love the case it comes with thats definitely a plus

thanks for not showing us at all how to use it i swear yall are too stoned to be making tutorials ill just email them for the manual

Get rid of the GOOFY Music It is a DISTRACTION

If I am running an inline and outline fan - could they be put on a splitter or is it better to have them controller seperately? trying to determine if I need to have a pro or pro+ controller - want to run inline fan, exhaust fan, inside circulating fan and humidifier from the controller

Does dechloinated filter water work well enough to avoid the white film dust? Or must it be full RO or distilled water from the store? I have a great dechlorinating filter but not sure if it will be enough. Thanks.

Warning don't use that sunscreen it contains carcinogen cancer causing chemicals we have been lied to on everything ⚠️✌️🙏

In the past year, I have become an AC Infinity nut!🤣 I have three tents in my grow room, 4x4, 3x3, and a 2X4. All three tents have smart exhaust fans with the 69 controller. I don't use the VPD section of the controller. I have a window unit AC for the cooling, a dehumidifier And a brand new AC infinity humidifier, that big 15 liter one....... That thing is a beast! The window unit and humidifier controls the lung room environment And I use the fan speed setting to control the temperature in the tent. I ALWAYS have some air flow in my tent, so I have a minimum setting on my fan and then I have a trigger temperature set for the fan to go at a higher rate to bring the temperature back down. Each tent has different lights and different thermal loads, but all three tents have the same style of air flow. The 4x4 and 3x3 are both Gorilla tents and the 2X4 tent is a Mars hydro. On the Gorilla tents, I use the front lower cinched inlets with 6 inch exhaust hose with a screen covering to bring the air into the tent. Just enough of the hose sticks out for it to lay flat and long enough to prevent light intrusion. I used the exhaust hose from the AC infinity 6 inch exhaust fan in the 4x4 tent. It is reflectively lined on the inside, so I fogged the hose outside the tent with flat black paint to knock down the light intrusion even more. The 2X4 Mars tent only has cinched openings at the top, So I use a very long 4 inch Exhaust hose to bring in the fresh air. Comes all the way back down to the bottom of the tent and to the bottom of the floor outside the tent. This way all tents take cool air from the bottom of the lung room and all tents have air flow from bottom front to top rear and it exhausts out the very top. The ceiling fan is always going to keep the lung room air mixed well. This maintains the long room parameters very closely. The tents parameters are just as stable. The CLOUDFORGE T7 Is an absolute beast and is highly accurate! It handles my lung room quite easily at setting 2. The absolute only downside so far is not being able to control it with the phone app when used totally on its own. You can use it with the 69 pro controller, but that is really only for one tent, because it uses the sensor from the 69 controller that is in your tent. With my Grow room set up in this fashion with AC Infinity, my environment has been rock steady! It's been one less thing to worry about and having to constantly check and tweak. Today I will be finishing the installation of my AC Infinity controlled CO2 augmentation! I'll run the hose to one central location in the grow room and then equal length identical hoses with a manifold at the end to distribute the CO2 to each tent, I'll zip tie each manifold to the top bar at the front of each tent. With CO2 being heavier it will fall down to the bottom and being stirred up by the circulation fans, which are AC Infinity also! Each tent will get a supply of CO2 through the manifolds and through recirculation, I think it will be a glorious run! I really love everything that I've gotten so far through AC Infinity! And this smart controller can make your life so much easier!

So i do live in south west germany in summer it is very hot, environment temp in my room where the tent is is about 26-28Celsius... what u recommend? Thx,

My seedlings nearly died because of low humidity but now looking better already

Acinfinity has falsly advertised compatability that in turn caused property damage they used there customers as Guinne pigs and when something goes wrong they turn there backs on there customers don't advertise a product as compatible with 3rd part product if you lack the responsibility to own up to youre companys mistakes 12 months later and my grow light is still dead and all acinfinitys marketing and support teams have done are block me on every social media and brush me off shame on acinfinity and anyone who supports there scams

thank you :)

These lil humidifiers are a gem to have in your environment. Used in conjunction with your inline air intake fan is essential. I'll turn the air intake pretty much off, and only have it turn on when needed.. (intake fan is run on temp/ hum sensors like a “Inkbird” )You do not want it pulling valuable humidity out( like in early veg). Also remove carbon filters until flowering time.. Then a slightly lower humidity for remaining cycle… You'll definitely see explosive growth when run in a good VPD parameter. This really makes all the difference in the world 😮… when your dialed in you'll notice your system doesn't have to work hard.. You can zip it up and let it do its job… This should be taught early on like choosing good genetics..😊

There customer service is out of this world if I don’t order directly from ACI or BAS I order three yall I love n respect what yall do thank uou