Видео

Nice music... We're gonna make it life. To the end.

After a year and a half of perfectly protecting my Ultra 23, I easily removed the cracked and battle scarred old AsBellt and easily (after multiple careful video watches) installed the 2nd protector that came in the box. Fantastic product! Will buy another in a year or two when this last one does its job.

Other glass protectors: Minimal extra items, glue spray or stick glass right on. Come in pairs for a second protector. This item: 3 plastic attachments; 9 foam attachments; Plug in UV light, cut off glue bottle, hope for the best with uncontrollable liquid glue & spend ages cleaning your phone & surrounding area so bubbles are more likely than with other protectors. One protector so one attempt. This ain't it. 👎

😂😂😂😂😂😂

This was a bit messy to apply, I wouldn't recommend using the entire bottle of glue, it leaked all over the sides and it was a pain to wipe off. As someone else commented, be careful removing the red guides as they can lift the protector after curing it. I have a small bubble on the bottom corner of the screen now, but I will leave it just so I don't have to redo the process.

Looks great. I installed to my S23 Ultra. Does seem a little overwhelming with all the items, but if you follow the video exactly it should be fine. Anyone with issues I have to assume its user error.

キレイに貼れなかった

The email for after-sales support is nowhere to be found! please help

3枚とも全滅しました。最悪のフィルムと言えます😅

piece of crap doesn't work

I also had an issue installing this for my OnePlus 7 Pro. During step 5 when you lay the glass down on the liquid, it spread out around itself and created a bubble, right in the dead center. There really was no way for me to get the bubble out without spilling a bunch of the liquid, since you cannot pick the glass back up after laying it down. Otherwise, everything else went without a hitch. I removed the #1&2 parts very slowly and carefully since I saw others having issues and I got them off just fine, so I recommend being extra careful there.

Can you trim the sides with scissors as i do not need to over the edges??

Misty camera, how do you keep the glue from going on the lens? RETURNED

Bad design. I have installed MANY screen protectors with similar glue application, and this one is the worst. When you remove #1 and #2 tool, they lift up the screen protector, the glue leaks out, and creates air bubbles. Saved most of it by pressing on the screen with a credit card while removing #1 and #2 tool. Also, once those "tools" are removed, they are not very usable for the second time because the sticky tape is warped/used after.

I just bought a Samsung Galaxy S23 Ultra and applied a tempered glass screen protector that directed me to watch this video. All was going well until it came time to remove parts 1 & 2, because the adhesive they used was crap and stuck to the phone. When removing #1 it pulled the tempered glass up and away from the phone, which has left me with unsightly little discoloured bubbles. #2 removed about the same, though it didn't pull the glass up. Both sides were left with jagged glue bits all along the top & bottom of the phone, and parts #1 & #2 are now unusable as the adhesive and foam both came off the plastic tools, so they cannot be used again.

😂❤

After wasting two protectors, here's my advice: DO NOT use the foam strips on the sides of the phone in order to spread the protector from the middle (as this video suggests), or I absolutely guarantee you will get bubbles because the film is sticky and won't release any bubbles if you try to squeegee it out. Instead, do the following: 1. Put the blue mounting bracket around your phone as seen the in video. 2. Peel off the back of the protector. 3. Using your right hand, gently align (but do not press) the protector onto two mount points of the blue bracket nearest to the phone camera. Use your left hand to hold onto the remainder of the protector in the air and don't let any part of the protector touch your screen (yet). 4. Now, grab the cardboard razor with your right hand and very slowly spread the protector onto the screen from one end to the other. I did this and had no bubbles.

it worked really well for me

Just installed this on my Pixel 7 Pro. It went on perfectly, the instructions were good. The positioning pieces and button foam stickers were useful, and the UV curing light is much more substantial than the 3-LED aliexpress ones (although i use a nail curing light). I think it's worth the small additional cost over the AliExpress cheapies.

Trash product wont recommend

If there are bubbles, how do you get it out?

One of the worst I have ever put on.

My comments. Watch the video will doing this job. Be in a well-lighted area. Dust absorber in my kit was very sticky and difficult to remove when dabbed and actually left glue on glass. Luckly, I saw it in the well-lighted area. Careful when tilting the phone to get the glue to move around, the glass moved on me, and I have to reposition the glass. I almost had it perfect. When I removed the guide, it lifted the glass. Was almost able to get all the air out. Fingerprint worked well. Hope this helps someone.

Horrible product... No physical guidance whatsoever all you get are those sticky foam bumpers and that's it... Idk if it was mines but, I couldn't apply the glass corrrecly and the glue wouldn't go all the way every though I used an entire glue stick unit and tilted it like shown in the video... 🤷‍♂️ Returning it just as is.. to get my refund..

気泡は時間が経てばなくなるよー

Idk what the deal is with all these comments. It was super easy to install and took 2 minutes. So far so good.

Ya lo intenté con el s23 Ultra. Falle en la 1ra dado que se me derramo todo el líquido por accidente. Ya en el 2do intento (vienen 2 en la caja) pues me quedo algo inclinado pero tolerable. Solo un par de consejos: teclas de volumen y de bloqueo a pesar de que le colocas esas gomas si se te te llega a derramar allí se filtrara aunque estén puestas. Recomiendo colocarle un clinex o servilleta debajo o incluso cinta para más protección. 2 en la parte inferior donde va la bandeja SIM. Al ratirar ese platicó con la goma SE DESPRENDE CON TODO Y PLÁSTICO! Tremendo susto que me lleve al retirar este! Retiro incluso el lápiz de Spen. Allí hay que colocar algún trozo de klinex solo en la tapa de SIM para que no lo dañe o desprenda. Al final si quedó pero siento que tapa y obstruye la bocina superior pq se oyen más bajas las llamadas telefónicas.

shitty screen protectore, all 3 of them had bubbles, i even went a phone store to see if they could do it, still came out iwth bubbles, dont buy this shitty product

The kit looks amazing but it is hard to install as you will have a lot of bubbles. Not really recommend it

I might be very lucky after that glue solvent leaked everywhere - I don't think any components have been damaged but I suggest everyone find a different less complicated screen protector because this was a dog to apply and its really not worth the risk - I looked at the instructions very carefully for my s21 ultra but holy crap the language barrier is annoying and again I suggest you find a screen protector with that sticky back instead of this crappy uv setting adhesive.

It is a good video. May I make a suggestion so that it is even better? Reverse the orientation (camera angle) so that the point of view always matches the user (viewer). Then the video is easier to follow.

難しかったし、1枚目が気泡が入りました。 もっと簡単だと思った…💦

2:57 ここがもっとも大事。下へ少しずつひっぱっていく際、上部のふたつの穴、その中間につま楊枝で境目へうまく差し込むと、剥離シート(捨てる奴)と保護シート(使う奴)が剥がれます。出来ない時にすこしでも参考になればと思います。

有り得んぐらい難しかった… 初めのスマホに貼り付けるのは、コテの練習… 本番は最後の保護シートを剥がしたあと、気泡だらけになるので ここで反面ずつ初めにやって練習したコテさばきを披露するやつだった…キレイにでけた。

台座用の滑り止めが入ってなくて泣いた

貼りにくい

Not thrilled about the install video. It should be made clearer that your work surface must be absolutely, perfectly level, or the glue will spill off the phone face. If all the glue spills off, your kit is junk. And it can also wind up getting into the speaker, buttons, etc. The styrofoam protectors only do an OK job at keeping liquid out. Most tables, counters, etc. in a typical home are not 100% level. They are +/- 1%, and that's enough to make this install an absolute disaster. At the very least, include an additional bottle of UV glue.

Garbage product. Absolute waste of money. You shouldn't be allowed in business.

めちゃくちゃいいです! 貼り替えるの3回目ですが、毎回専用器具1、２の所に液体が流れ落ちて剥がすのに苦労してます笑 でも爪などでカリカリっとしたら固まってても取れるし、綺麗に貼れるし最高です,

Just installed this on my s10, and I can say that it's a great screen protector. Not only does the guide allow you to easily apply it, but if you follow the video you should get no air bubbles.

before u watch this video, do yourself a favor and return the product before you realize how garbage the product is LOL

Piece of absolute junk. Never buy this. I threw them all in the trash where they belong. Typical cheap Chinese sh*t.

恐らく剥離シートと保護シートの境目ががピッタリ過ぎで私も何度か一緒にはがれて来てしまいました。 で、動画の(5)と(6)の工程の間に剥離シートの白い枠の各辺を外側に折って、きっかけを作ってから剥がすと保護シートが画面に残りやすくなった印象ですね。 1枚目でそこそこ綺麗に貼れて検証はしていませんので、折ってみる際は自己責任で。

This product is absolute horse shit DO NOT BUY

Thank you so much for such a clear and easy to follow video with no messing around. Watching this I applied it perfectly first time which never happens with screen protectors. It genuinely came on so well I keep doubting if I actually put one on. Take care brother :)

I’ve been able to apply the screen protector but I’ve ended up with a lot of bubbles!! So frustrating and the anti slip strips do not work!

わざわざ買う価値あるかと言われるとはっきりいってゴミ フィルムの性能以前に貼りにくさが尋常じゃない

今まで使ってきたフィルムで一番使いにくかったかも。型にはめて貼るのは画期的かと思いきやフィルムと穴が合わない最後に枠が切り離せないで発展途上感満載でした。

シートをインカメの穴に合わせて青い枠の突起にハメようとしたらずれていてハマりませんでした。 シートを左右逆にすると突起にハマりましたが、そうするとカメラの穴が… 結局、青い枠外してつけました。 もう一枚のほうはそんなことなさそうなんで、またシートが👶によってぼろぼろになったら、今度はもっとうまく付け替えたいと思います。

全部剥がれてしまいます！だめですっ！