I just bought a Samsung Galaxy S23 Ultra and applied a tempered glass screen protector that directed me to watch this video. All was going well until it came time to remove parts 1 & 2, because the adhesive they used was crap and stuck to the phone. When removing #1 it pulled the tempered glass up and away from the phone, which has left me with unsightly little discoloured bubbles. #2 removed about the same, though it didn't pull the glass up. Both sides were left with jagged glue bits all along the top & bottom of the phone, and parts #1 & #2 are now unusable as the adhesive and foam both came off the plastic tools, so they cannot be used again.
I also had an issue installing this for my OnePlus 7 Pro. During step 5 when you lay the glass down on the liquid, it spread out around itself and created a bubble, right in the dead center. There really was no way for me to get the bubble out without spilling a bunch of the liquid, since you cannot pick the glass back up after laying it down. Otherwise, everything else went without a hitch. I removed the #1&2 parts very slowly and carefully since I saw others having issues and I got them off just fine, so I recommend being extra careful there.
Looks great. I installed to my S23 Ultra. Does seem a little overwhelming with all the items, but if you follow the video exactly it should be fine. Anyone with issues I have to assume its user error.
Bad design. I have installed MANY screen protectors with similar glue application, and this one is the worst. When you remove #1 and #2 tool, they lift up the screen protector, the glue leaks out, and creates air bubbles. Saved most of it by pressing on the screen with a credit card while removing #1 and #2 tool. Also, once those "tools" are removed, they are not very usable for the second time because the sticky tape is warped/used after.
Other glass protectors: Minimal extra items, glue spray or stick glass right on. Come in pairs for a second protector. This item: 3 plastic attachments; 9 foam attachments; Plug in UV light, cut off glue bottle, hope for the best with uncontrollable liquid glue & spend ages cleaning your phone & surrounding area so bubbles are more likely than with other protectors. One protector so one attempt. This ain't it. 👎
I just bought a Samsung Galaxy S23 Ultra and applied a tempered glass screen protector that directed me to watch this video. All was going well until it came time to remove parts 1 & 2, because the adhesive they used was crap and stuck to the phone. When removing #1 it pulled the tempered glass up and away from the phone, which has left me with unsightly little discoloured bubbles. #2 removed about the same, though it didn't pull the glass up. Both sides were left with jagged glue bits all along the top & bottom of the phone, and parts #1 & #2 are now unusable as the adhesive and foam both came off the plastic tools, so they cannot be used again.
I also had an issue installing this for my OnePlus 7 Pro. During step 5 when you lay the glass down on the liquid, it spread out around itself and created a bubble, right in the dead center. There really was no way for me to get the bubble out without spilling a bunch of the liquid, since you cannot pick the glass back up after laying it down. Otherwise, everything else went without a hitch. I removed the #1&2 parts very slowly and carefully since I saw others having issues and I got them off just fine, so I recommend being extra careful there.
Looks great.
I installed to my S23 Ultra. Does seem a little overwhelming with all the items, but if you follow the video exactly it should be fine.
Anyone with issues I have to assume its user error.
If there are bubbles, how do you get it out?
it worked really well for me
Misty camera, how do you keep the glue from going on the lens? RETURNED
😂😂😂😂😂😂
Bad design. I have installed MANY screen protectors with similar glue application, and this one is the worst. When you remove #1 and #2 tool, they lift up the screen protector, the glue leaks out, and creates air bubbles. Saved most of it by pressing on the screen with a credit card while removing #1 and #2 tool. Also, once those "tools" are removed, they are not very usable for the second time because the sticky tape is warped/used after.
Trash product wont recommend
What was wrong with it?
The UV light was waek didnt do anything. Bubbles in the screen after i finished. Etc...
Other glass protectors: Minimal extra items, glue spray or stick glass right on. Come in pairs for a second protector.
This item: 3 plastic attachments; 9 foam attachments; Plug in UV light, cut off glue bottle, hope for the best with uncontrollable liquid glue & spend ages cleaning your phone & surrounding area so bubbles are more likely than with other protectors. One protector so one attempt.
This ain't it. 👎