Видео

How many gallons of water does you tank hold?

try DIY DETAIL iron remover with the clay towel ,using theyr decontaminating method.....it is fast ,efficient and not expensive.

Try a little bit of white vinegar. Fifty-fifty get rid of the hard water.... Let it sit in your tank overnight.... Half a gallon of white vinegar, I think about $2.

Put some Marvel Mystery oil in the gas it helps lessen carbon buildup

Good video. Your generator needs a valve adjustment. You'll wind up killing it if you don't do it every few years.

Good info. but so much for your advertising your company. You blocked the co. phone number the whole video.

Wow! Very informative and interesting thank you for sharing 👏🏻🎬

Ik trigger are trash , bottles is all they got

Bottle debate 😂😂😂😂😂, who’s having a bottle debate ?

Tolco sprayers on IK bottles. 👌🏽

Yup great tips. I have several O rings on stand by and I had an extra quick connect set. The lil stopper broke on my water hose inlet and water was leaking out before getting to the pressure washer. As far as the generator, I have the Predator 8750 and when it's low on oil, it won't start and if it dies, it will backfire. My pull cord broke, but luckily I use the electric start. Zep spray bottles is what I have. No issues with them. IK is costly I have the multi purpose sprayer.

How's it going Jerry!!

Two different products it should be wet coat vs ads beads

Can you make a video about your packages and prices?

Beads from Armour Detail is the spray and rinse. You also used Wet Coat incorrectly. With Wet Coat you should have sprayed maybe 3 sprays at most and you rinse the product bottom up so it will move toward where it may not have protection. (It spreads) You spread the wet coat across the hood onto the the ADS side as well. BTW, you'll likely find that CARPRO Hydro Lite will outlast the Wet Coat by a great margin, and the surface will feel slick like a coating. Do maximum 3 sprays per door and rinse bottom up.

Thank You 👍 Detailer from Wa

Pricing is way low. You can charge way more 👍

Remove the battery post bro

Sprayed wet coat then rinsed towards the side that Armour was going to be applied , i would have rinsed wet coat from the passenger side so water goes away from the side Armour was going to be on

First of all you using way too much product two to three spray's per panel of wet coat is more then enough second when you rinse off wet coat you had already coated the left side of the hood my friend

Koch chemie s003 , dilutable 1oz in rest water . Thank me later

I think the Gyeon blew to the other side and skewed the test on the armour side. Armour just came out with a spray and rinse product called “Beads” a few weeks ago. The amplify is a great drying aid though. Probably my favorite I’ve tried

I think the Gyeon blew to the other side and skewed the test on the armour side. Armour just came out with a spray and rinse product called “Beads” a few weeks ago. The amplify is a great drying aid though. Probably my favorite

Amen detailing is a journey theres no right or wrong way to do it

Nice video i did not know amplify was a spray and rinse off product i use it as a quick detailer

Use it on a real car and not that dirty Honda 😂😂😂 Reyes! lol

I think tech choice will do the same cheaper.

These are two different products. Amplify is more of a quick detailer/drying aid and is super slick and amazing to work with. I bought and gallon love it. Gyeon wet coat is more of a sealant than amplify is. Armour detail supply has a product called “beads touch less sealant” which is way more comparable to Gyeon wet coat. Trying using amplify as a drying aid and you will see how slick and easy it is to apply.

Try the turtle wax graphene ceramic spray wax, works great good price.

the only thing about this test is the left side of the hood already had gyeon on it when you rinsed off the other side a little goes a long way with the wet coat and it spreads around as you rinse love these comparison videos but just wanted to point that out 🙏

Great video and comparison. When I'm able to up sell, I have Cerakote Rapid paint Sealant. I works ok. I have noticed on my regular clients that have it, I've had to do 2 applications for it to really work good. I have a biweekly client that wanted it done to his GMC 2500. I did the whole paint decontamination process completely dried the vehicle then I worked on the interior. Once finished that's when I applied the cerakote. 2 weeks later I went back to his house to do his truck again I noticed a couple areas were not water beading properly So I then reapplied cerakote. Then another 2 weeks later I went back to his house and it was beating up as it should everywhere. That's the second client I've noticed that on. I have thought about trying a product that I just spray on and spray off. But to me I feel like if I'm wiping it on to the panels that it will actually stick longer. 🤷🏻‍♂️

Explain the licensing aspect. I understand the insurance part. Are you like a LLC?

IF YOU EVER HAVE THE CHANCE HAVE A LOOK AT ( THE RAG COMPANY 💙 ) IF YOU EVER LOOKING FOR SOMETHING YOU JUST HAVING TROUBLE ON FINDING CHECK THEM OUT

BROTHER YOU DID 9O% OF ALL THE RIGHT STEPS YOU COULD HAVE ENDED IT STRONG AND RIGHT BY DOING 8OO 1,OOO 1,5OO 2,OOO & 3,OOO 3M WET & DRY SAND PAPER WITH ( KXK SANDING BLOCK ) SMALL AND JUST ENOUGH SIZE TO HOLD THOSE SAND PAPER AND PROCESS THEM CUT WITH BOTH RUPES PADS 3" INCH COARSE BLUE WOOL PAD WITH THE BLUE COARSE CUTTING POLISHING COMPOUND & THE 3" INCH FINE YELLOW FOAM PAD WITH THE YELLOW FINE POLISHING COMPOUND THE PADS AND LIQUIDS BY RUPES GOO HAND AND HAND CLEAN IT WITH O.P.T. ~ OPTIMUM PAINT PREP CLEANER SPRAY NOW INSTEAD OF EVER DOING 2K CLEAR COAT AGAIN AND BEING A SPRAY THAT WILL GOO BAD AND NOT WORK AFTER 2 DAYS AFTER YOU USE THAT CAN TOSS OUT THAT IDEA AND USE ( 3M CLEAR P.P.F. = PAINT. PROTECTION. FILM. IT WILL LOOK WAY BETTER AND LOST YOU ANYWHERE FROM 5 ~ 6 PLUS YEARS THE RESULTS ARE BETTER YOU'LL THANK ME LATER YOU WILL SEE GOOD LUCK KEEP UP THE GOOD WORK ✌🏼OUT

A single heavy layer of meguiars headlight coating is te way to go, no messing around.

I believe you need to let the lights rest in shade or heat ive had that issues some customers need there care asap for daily use so i would recommend to replace them either Oem or aftermarket but find them a great set that’s not to cheap and install them for a small fee my opinion everywhere has there own way I know that God bless everyone

What coating can you use on headlights ? How long would the coating last once opened ?

Bro I love you so that's why I am telling you this First- watch RUclipsR- HEADLIGHT RESTORATION PRO'S video about those 2k clear coats...look how it can ruin headlights Second- wear a mask pls Third- if u insist to use clear coat like that, don't polish your surface so fine, it has to adhere properly

I've had good success with process from The Headlight restoration pro youtube channel ruclips.net/video/c3jK4SOIRM8/видео.htmlsi=0wfS6X3tJk9uszwg

You should wear a mask spraying that clear coat.

Aren't you supposed to sand 800 to 1000 grit max in order for clear to stick? That's what pro painters advise. Also adhesion promoter is recommended.

Just to clarify….When you say you charge $60-80 for a wipe and vacuum do you charge an additional amount over that to wash the outside?

How much for wash and vaccum

I like gyeons new iron remover. smells great.

Carpro iron x

Don’t forget your vehicle expenses maintenance because without it you will fail immediately! Keep Grinding Brother from Fred’s Mobile Car Wash & Auto Detailing LLC from Tampa Florida 🚀

Perfect answer its ur name that u need to protect

I use DIY Detail Iron Remover - can clay and iron remove at the same time. Saves time.

I like to use PNS iron remover . Smells ok and seems to work well 😎

Great job