![modern DEsign](/img/default-banner.jpg)
- Видео 86
- Просмотров 96 124
modern DEsign
Германия
Добавлен 13 май 2017
This is a channel for users of Fusion 360, and for anyone who wants to know more about this powerful design and manufacturing software from Autodesk. Fusion 360 is available at very attractive pricing for commercial users, but startups, students and hobbyists can use it free of charge! modern DEsign is intended to give you tips on how to use this great software, show you how others are using it in unusual ways and inspire you to MAKE ANYTHING!
I'm the Fusion 360 Evangelist for Autodesk in Europe, and I can help you in English, German and Italian. Most of my videos are in English, but from time to time, I may post in other languages or offer captioning as well. I'd be pleased to see your work with Fusion 360 - and I am always looking for stories to tell! Talk to me!
I'm the Fusion 360 Evangelist for Autodesk in Europe, and I can help you in English, German and Italian. Most of my videos are in English, but from time to time, I may post in other languages or offer captioning as well. I'd be pleased to see your work with Fusion 360 - and I am always looking for stories to tell! Talk to me!
Using T-Splines as Helper Geometry 60 Seconds
T-Splines can be very useful - also as helper geometry. This avoids creating complicated sketches and is a trick I often use, either with, or without T-Splines!
Просмотров: 119
Видео
Fusion 360's Delete Face Command
Просмотров 1,1 тыс.2 года назад
The delete face command in Fusion 360 is an overlooked feature in parametric workflows. Gimme just one minute and I'll prove it!
Using T-Splines as Helper Geometry
Просмотров 1592 года назад
In this example of a hyperboloid table - I used a T-Spine to help create the hyperboloid shape that defines these kinds of structures. Sure - there are other ways to do it, but they often entail 3D Sketches and take time and effort - while using T-Splines can make it fast, and easy. I often use helper geometry in this way to save myself having to create extra sketches....I hope you find it useful!
Fusion 360's Delete Face Command
Просмотров 2,4 тыс.2 года назад
The delete face command in Fusion 360 is an overlooked feature in parametric workflows. If you know how to use it, it can save you a ton of time - and often, get you out of a jam if you've made a mistake too! This short video shows you how it works and one way to use it! Good Luck!
Building CAD models that can easily be changed part 3
Просмотров 833 года назад
Fusion 360 uses parametric and non-parametric designs, but the sad truth is, although parametric modelling has been around forever, it is often not used properly, even in professional design organizations. This results in models which are basically un-modifiable - any change will cause errors and unexpected results. Fusion 360 makes use of a technique called Top-Down Design to make robust param...
Fixing Broken Surfaces on Import
Просмотров 1203 года назад
Sometimes when you import foriegn file formats into Fusion 360, especially IGES files, you don't get the solid volume you would expect. Fusion 360 has special tools to help you fix these wonky files, and here I give you a quick run-down of how they work!
Using Lofts in Fusion in 60 Sec
Просмотров 643 года назад
Lofts are a powerful command with a lot of options for creating complex shapes and surfaces. Here is a fast rundown of what they can do in Fusion 360.
What is Parmetric Design in 60 Sec
Просмотров 833 года назад
For those new to CAD modelling - the term "parametric design" may be new - and many people are unsure about what it really means. This video is the fastest way to get a handle on what that term even means.
Fusion Basics Tutorial: 1 - Setup & Canvas
Просмотров 3384 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fusion Basics Tutorial: 6 - Rendering
Просмотров 894 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fusion Basics Tutorial: 5 - Using the Timeline
Просмотров 624 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fusion Basics Tutorial: 2 - Sketching
Просмотров 724 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fusion Basics Tutorial: 4 - Pattering and Copy
Просмотров 354 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fusion Basics Tutorial: 3 - Basic 3D Geometry Creation
Просмотров 744 года назад
This is a basic Fusion 360 Tutorial in several parts intended for first-time users of Fusion 360. We will be creating a simple concept for a table top lamp. Download the canvas here: i.imgur.com/9XEWwiO.png
Fixing broken imported surfaces in Fusion 360
Просмотров 5 тыс.4 года назад
Fixing broken imported surfaces in Fusion 360
Using the Loft Command in Fusion 360
Просмотров 1,6 тыс.4 года назад
Using the Loft Command in Fusion 360
What is Parametric & Non-Parametric Design?
Просмотров 7 тыс.4 года назад
What is Parametric & Non-Parametric Design?
esta web me funcionó para mi, formware, opción Online Stl Repair
Good vid - thanks!
Awesome workflow! Can i ask, how were you able to duplicate the t-spline pull function @2:07? I cant seem to duplicate it and will require continuous subdivision which takes significantly more time than how you did it. Thanks!
Hey, this is a bit of a late comment relative to the upload date, but I thought I might ask here anyways. Is Fusion 360 something I would benefit from learning while it's accessible to me for free as a student? or would it be worse to have to switch off from that after learning it because I can't afford it? or am I just overthinking what CAD I use?
THANK YOU for this video. I spent 45min trying to find a video on the difference between delete and remove. That is my fault, I was searching for Splitting Bodies waiting for them to hit on this topic. However I found your video and now I got it (and I'm a beginner). My only comment on the video would be is to slow down so I can read what you're selecting. Thank you !
Thanks for video!
Now working, Im getting the following error: Error: FlatPattern1 cant complete sheet metal operation due to a model error check the body then try again sm_unfold_error
Excelente, super util, muchas gracias!
Would love to know where you got the image. Great video 👍🏻
great tutorial! unfortunately i couldnt get the sketch line of the cone to "flange" out horizontally as you did. the flange only works +/- vertically. Must be something with the program updates as the flange command window in the current version looks different compared to yours. edit: took some time to figure it out. just switched the sketch plane of the cone diagonal(?) on to the top face instead of the front face. now the cone is tilted 90deg but that doesnt affect the final sheet metal pattern in any way. was also able to create an oblong cone sheet metal pattern using this method (replacing the "surface revolve" with "surface loft" instead). kudos again!
Also, I was hoping to use Fusion on my iPad ONLY, can that be done
WHERE do you actually go to create a Team, I’ve downloaded Fusion but it states “join a Team on the Web to start using Fusion”
Where is BOOM???? in fusion 360?
I didn't realize this workflow was possible. So this would allow one to essentially edit organic meshes, correct? (with the caveat that you mentioned of it not being 100% accurate always and it may require lots of subdividing.)
Echt klasse den Vorteil von top down gezeigt!!
I didn't want to join any teams, I make models for myself, at home. But today when trying to launch Fusion 360 it ask my to "create a team" but this option is not available because it says that I am already the owner of the team. Or I should "join an existing team", but this option is also unavailable and I can't do anything. All I can do is just close the app :(
I’m having the same issues
You keep mentioning that you are making a series of videos about custom Appearances & rendering in Fusion 360. Where the heck are they? A few links would be nice!!
sehr gut erklärt vielen Dank
Thanks for the video. What if you wanted to add a jogging bend overlap to this cone or cylinder?
This was super helpful as I was trying to import a part and did not realize that the surfaces were not stitched together
how do I know that all parts inside component have been grounded?
I've done cones in fusion a few methods but this has been the easiest. Thanks for the tutorial.
How to delete a hub/team once project is done?
When I get to the "create flat pattern", it does not flatten. What am I doing wrong?
Thank you! Got it
I think it was a very good explanation, thanks!
Smooth & quick! I like.
Great sharing. Thank you so much!
Like many fusion tutorials I go to for help on a subject this one after a few sections starts rambling off into many other aspects of the program and finishes off without me being any further ahead. My suggestion would be to use a very simple change a simple model, and cover sketching lessons in another video. This is not a flame, just to let you know how this beginner feels when trying to solve a specific problem. Good luck with your you tube venture.
It would have been more helpful to slow it down and show what you're talking about.
This is a very interesting way of making a boss. Good to know. Thank you.
Glad you liked it!
Such a LIFESAVER!
Very informative
Glad you think so!
I had to watch it ten times and really try to find where you click with the mouse... great content but SLOW down! :D
Good job I did it once and I wanna do it again not working I'm missing something very frustrating
Which part? did you create the small straight bit first?
good content, but you need to SLOW down and give actual instructions. so many times, you do things without saying what you're doing. I had to watch it 5 times just to reproduce what you did
Youre the hero here
lol at the breathing. great video though
This is exactly what I was searching for for SOOOO long. Thank you very very much. I've been wasting HOURS searching for this solution!
Glad I could help!
Sehr gutes Video..... vielen Dank....👍👍👍
Die Videos zu CAM ist super, insbesondere weil die Fertigungsstratgien prima erläutern werden. Würde mir wünschen, dass 3 D Strategien anhand Modellen mit räumlichen gekrümmter Flächen so erklärt und vervollständigt werden würde. Dort gibt es im Netz so wenig- Dank dem Video komme ich gut klar mit einfachen Fläche , aber wenn es sich um räumliche gekrümmte Fläche geht, da hänge ich. Laut meiner Konstruktion sollten dies auch mit einen 3 Achsen Fräsen ohne 5 Achse herstellbar sein. Ich hätte da so ein Beispiel, wo ich einfach nicht weiter komme ...Danke.
Where are the images?
How do I empty the loft?
Excellent as always.
Hello, I want help with a subject. I draw the event in the video I sent in fusion in sheet metal, but when I do it straight, I cannot see the angles in a way. I will cut the profile in the laser. ruclips.net/video/hsKXjiNU4Wk/видео.html
Top erklärt!! Danke
Vielen Dank! Tolles Video! hab viel gelernt!! gerne mehr davon!!
Tots? Heck Yes! solved my problem, thanks!
Thank you so much for this! I just completed the whole series and it was wonderful. I am coming from the graphic design field and this was exactly what I needed. Basic things like, the blue means that the program is asking for info. Fusion requires a very different way of thinking, a jump for someone whose industry has some very different interface rules/tools. It is very awkward for someone who has been clicking and dragging to move around in a space for many many years to suddenly have to click on a hand to do it. That scroll wheel zoom is a life saver, and, yes, so nice to have my sinking suspicion affirmed that it doesn't work with a track pad- before I found your tutorial, I tried every iteration to make that work. Again, thank you, thank you, thank you!