Видео

Will the signal penetrate walls of buildings within the broadcast range ?

Will the signal penetrate walls of buildings within the broadcast range ?

the video is incorrect in Step 2 (~2:00) if you also want to have the internet after connecting to that remote L2TP vpn server. When creating users, the local IP address should NOT be your router, it's the IP of the virtual VPN adapter, it should be something in the same subnet with your router, ie if your router is 10.10.10.1 the local IP can be 10.10.10.225. Additionally, DNS should be 8.8.8.8. Following these settings you will get the working vpn AND internet connection.

I have to know this

Can you please stop impersonating classic rock radio .DJ’s from the US mid west coast! It makes your sound as though you are vocal frying. It grated my ears so much that I paused to leave this comment. Nice video, real shame about the phoney voice.

these cards are intel not amd compatible

Can you link this to another router like Archer A6? Or it has to connect to two modems? I currently have TP Link Archer A6(also known as AC1200) router with Mesh Wifi Extender TP Link RE330.

Wicked Video !! Nice work sir !! Loved it !!

Hi, very informative, I need help in buying a wifi card, my laptop is not detecting my WiFi 6 Router will this fix my laptop if I upgrade? Here are the Key Specs, Please Help 🥺 MY LAPTOP: Lenovo G40-80 - Intel i5 5200U, Radeon HD 8500M (R5 M230) GPU - 12gb 1600MHz DDR3 - WIFI: Dual Band Wireless-AC3160 THE CARD I Want to Buy: MPE-AX1800H WiFi 6 Built-in Bluetooth-compatible: 5.2 Bluetooth-compatible Product Interface: MINI PCI-E Chip MT7921 Standard 802.11a/b/g/n/ac/ax Frequency 2.4GHz/5GHz Wireless Speed: 2.4G/574Mbps, 5G/1200Mbps Interface WiFi: PCIe BT: USB Operating Mode softap, station Size 30*29.9*2.6mm Power Supply 3.3V ±0.2V Operating Temperature -20℃~70℃ Power ≤20dBm Power Consumption ≤1500mA

I have a rog strix G614JI, what’s the best wifi card I can possibly get

Nice Video, my both ISP giving me IP on their on router and VPN router behind the NAT, I pass through DMZ both side, Is there any more configuration needed in VPN configurations?

Not helpful at all.

Just to clarify, in 2:33 it sounds like you stepped down 24V (AC I assume) to 3.3V DC. Yet, the specifications of the HLK-PM03 converter says input should be 100-240VAC. Was your existing wiring providing 24VAC? It worked with AC voltages less than 100VAC? I really want to know if this converter actually works for AC voltages lower than 100VAC. The wires on my current old doorbell supply roughly 10VAC. Will this converter still work?

Would you need the OC200 controller for this? Or can i do dual WAN ISP setup with just the ER605?

Hi, Great tutorial! I have several PLCs and embedded boards in my office, and I would like to connect these PLCs to a local IP through a router with a VPN client. This router will then connect to my main router, which has internet access. I have a team of 5 engineers who work remotely, and I plan to set up a VPN server on the cloud, where I can create accounts for each of them. They will install VPN client software on their PCs to securely access the PLCs and other devices in my office from home. I would appreciate any guidance you can provide on setting this up. I am not allowed to make any changes to the Main router in the office which is connected to the internet but allowed to do whatever is necessary on the Router with the VPN client which is behind the main router.

good to see you share such important techniques. have a sub!

Does this method need any firewall configuration? Such as traffic rules or port forwarding or so on…? I followed this video but I cannot connect VPN, and I tried to connect my router port 4500, 500 from a public network, both failed.

And if you use some software like Primocache you can reach 10-16000 mb/s on a old system :D

Hi, we can not see responses on comments, it's not showing when clicking on!

Hello, how can i know if upgrading wifi will work? I have PPD-QCWB335 802.11 b/g/n (1×1) on my hp notebook 15 d002sk f8r02ea motherboard 218F years production 2015 I want wifi 6 or wifi 6e Thank you

Hello, The video is very informative, I did it successfully, Thank you. Can you please put a video on port forwarding & load balancing together on an ER-605 router?

It's a gigbit or megabit router

How do we add a new AP to the existing setup? The IT guy left the company, and we want to add one more AP. He mentioned it's a mesh network, and it should automatically pick up the configuration from the master AP, but that's not happening. When I plug it into the switch, it's not adopting the configuration and is still on its default open SSID TPLINK OMADA AX3000

In this video you did not describe why the IP pool was 192.168.7.1/24 and not 192.168.7.0/24 can you explain

Schuppe Unions

I'd be interested in starting a class action lawsuit for all battery operated blink doorbell owners. The listed "battery lasts up to 2 years" is INCREDIBLY misleading. Only being able to run on lithium batteries is such crap and wasteful.

Thank you for the video

How do you get it to capture more than 10 seconds. Ive tried everything.

Thanks for this information! I do have a question. I have the same exact camera and inserted a 128GB EVO Select SD card and set it for continuous recording. The issue is, when I eject the card from the camera and insert it into my PC to take clip shots, the SD card only captures in 10 second intervals. I set for continuous recording and turned of motion detection altogether - My question is: How do I set the SD card (or camera) to record one long clip rather than hundreds of 10 second interval clips? Also, I would like to set up a live RUclips feed from this camera and I know it has RSTP capability. Is this possible to do?

I have an inspiron 16plus 7630 laptop, i want to upgrade my wifi card from wifi 6e to wifi 7. I have 3gbps internet connection. It has a wifi 6e AX211 intel card, I'm looking for a wifi BE200 card?

In Germany we lucky to have a 10gib

Great video Quick question- would normal wifi devices (such as security camera, old printer, etc = which use 2.4ghz frequency only) work if user keeps on only MLO band and turn off 2.4ghz, 5ghz abs 6ghz bands?

SFP+ that are 10Gbe, can they run at 5Gbe? Also, how do I tell if I can use DAC over fiber?

Hey guys, I'm new to the VPN world. I have a question about my setup. I run OpenVPN server as docker container on Ubuntu server within private home network (no public IP). And port-forward towards IP:Port of the server in the router. This works great, however, my main concern is security. My Router doesn't have VPN config options as it is quite old, is port-forwarding secure enough for the simple use case of accessing home media server? Are there any options I can leverage that are better? Any input would be helpful :) Thanks

Hello There is still one feature with MLO that none have been able to show to me yet. And that is what speed you get when downloading and uploading simultaneously. These question would be nice to get benchmark on: 1.what would the speed be when copying a file between two wireless computers connected to same wireless network when using wifi 5/6/6(ofdma)/7/7(ofdma)/7(MLO). (this would mean that router have to transmit and receive simultaneously to get best efficiency on the data transfer, exactly what MLO is meant to solve) 2. What would the speed be between two computers where one is wireless and the other is connected with cable and the wireless computer simultaneously downloads and uploads files from/to the cable connected computer using wifi 5/6/6(ofdma)/7/7(ofdma)/7(MLO) on the wireless computer. (this would mean that router and wifi connected computer have to transmit and receive simultaneously to get best efficiency on the data transfer, exactly what MLO is meant to solve) 3. The extreme case I also would like to see is how well wifi 7 MLO handles when 2 wireless computers connected to the same MLO network tries to simultaneously upload and download files to each other. Both computers have to send and receive at the same time. Would enabling 2.4 Ghz wifi in this case improve output instead of only using 5Ghz and 6Ghz?

hello do yo offer guide on how I can offer hotspot service to a community using STL, pls how can I contact yo ?

thanks buddy.. your omada router tutorial are great and clear

such a great.man.. thanks

thankyou

hi,can you help what is the best wifi card replacement for my HP ENVY X360 15EU?

I have a TWG 431BR and I'm just trying to get the other wan ports working for other devices like ps5. Already called support and found out I had to reset the modem to get new numbers auto assigned for the ip, and I had plugged into console by accident instead of wan2, so I'm pretty noob on this networking. The manual has print too small to read so I had to use glasses and a magnifier to read it! After completing every step, I only have internet on the pc but not other plugs and nothing tells me what to do now.

I wanted to create client-server setup, using Android OpenVPN for testing, but it happened that I could get IP address for my client, but it couldn't get internet access. However, I've double checked my VPN settings, the local network I configure is .1 (which is my router address) not .0. Any advice? Thanks

Hello! The Form Auth op can be use to collect info like emails, phone numbers, etc. How can made this configuration? Regards.

The l2tp connection attempt failed beacause the security layer encountered a processing error during initial negotiations with the remote computer

Unifi 👍👍👍

Can you help me understand one thing please? If I use third party VPN like NordVPN my network traffic passes through their VPN server (which has a different country's public IP) right? So if I setup the same VPN server but it's self hosted at home which IP does the traffic pass through? Is it the same public Ip address I was assigned by my ISP? Or will I need another public IP for setting up my VPN? Thanks. Very precise and informational video. Subscribed.

Hey man, thanks for creating this video, question, is there a restriction on what version the UniFi controller needs to have, I heard that if it’s too new it will refuse to adopt End of life devices

I dont understand why does the second switch need to be physically connnected to the first one. Shouldnt the connection between the two be wireless?

Mine finds the Blink wifi transmission but will never find the sync module. About to send it back, been three days and I work in I.T. It should never be this hard.

Where can I get these models so I can use my doorbell power source to power my doorbell camera?