- Видео 6
- Просмотров 58 398
Polymarineshop.com
Добавлен 5 сен 2014
Видео
Polymarine's guide to Inflatable Boat Cleaning, how to get best results
Просмотров 80311 месяцев назад
In this video we bring back a very dirty demo inflatable dinghy back to a good clean finish. In doing so, we cover the principles to keep your own inflatables, RIBs, SIBs and SUPs clean and protected from UV rays, so they don't get as mucky as our demo inflatable. See Polymarine cleaning products here: www.polymarineshop.com/clean/ For Inflatable Boat tips and advice: www.Polymarine.com/advice
Polymarine's How to Repair Inflatable boat with PVC Adhesive and patch
Просмотров 22 тыс.11 месяцев назад
A complete guide to making a permanent repair to an inflatable RIB, SIB or dinghy. All the Polymarine adhesive and repair products can be found at:- PolymarineShop.com For more Inflatable Boat advice and tips, visit Polymarine.com/advice
Rotating Outboard Engine Mount
Просмотров 2,4 тыс.5 лет назад
Rotating Outboard Motor Bracket. From Horizontal to 45 and 90 degrees. Can be used on hard shell and inflatable dinghies. The “swivel” bracket allows the boater to leave the outboard motor on the dinghy when raising the dinghy to a vertical position onto the swim step. Eliminates the need for storage of the motor elsewhere on your boat. No spilling of fuel or oil. www.polymarineshop.com/snap-da...
Autolock Dinghy Launching Wheels
Просмотров 1,8 тыс.6 лет назад
1st glimpse trailer to the forthcoming Demo movie
Snap Davits
Просмотров 32 тыс.7 лет назад
Safe, instant locking, snap davit system for use with inflatable dinghies and boat tenders. Insta-Lock, designed to secure and stabilise a dinghy to the back of a Motorboat or Yacht. How to install snap davits www.insta-lock.co.uk
👍
I have patched my inflatable boat with this glue and I must say that this is a tricky product to work with: the biggest issue is the glue-curative ratio. As the curative comes in a small glass bottle, it is extremely difficult to use it for a small batch of mixture. There is no nozzle and curative is runny as water. Also there is no way using any instrument to taking needed amount of curative - take too much out and no way to put anything back. Also I tried using an empty and cleaned joghurt plastic container for mixing the glue. It melted. Also take a look how much glue is mixed in this video. After inner patching, you should wait 6 hours. Guess what happens with the glue-curative mix? Yes, you will make another batch. This set costs you around 30 euros. Although I believe the product works well when cured, handling is way too difficult. I’ve seen PVC glues that can be used straight from the container and the glue is activated with heat. That’s more like a product I’d like to use.
Pls were can I get the PVC poly marine in Nigerian
Just way too overproduction crap in this video. Too much background noise background music fancy car salesman speaker. No you guys can go back and try again. Less is more
Your Critique of this Video is unnecessary. It is clear and explains the process well.
Can you tell me please.....what's the best masking tape for this job??? Thanks.
Masking tape
does it works i banana boat:?
Yes, if it is made from PVC fabric. The same process can repair all PVC inflatables. SUP repairs can be made too, but the drop stitch construction can make it a harder process.
do you need to sand it down before applying the glue? it seems you didnt do that in the video
On this PVC inflatable repair demo, no sanding is required on the PVC fabric, just the application of cleaning solvent is required for a very good bond. For repairs to Hypalon inflatable boat fabric and rubber components, sanding the surface is required to give a clean key for the adhesive.
How to order?
West Marine sells this glue I just bought one today
You can find distributors here:- www.polymarine.com/distributors/
Can i ask you bro..what the of your glue and mixing?
Mix the Polymarine adhesive with Curative at the ratio of 25:1 The Curative supplied is in ratio with the adhesive, so half the curative and half the tin will also be 25:1 - find more info here: www.polymarine.com/advice/
The is a difference in weight trust me been around boats far to long, 9.9 hp short shaft comes in at 39kgs long shaft comes in around 42, Shorts shaft 20 hp 52kgs and not even going to long shaft, ask anybody on here or even better look at the web sites i run a 20hp mariner on my boat the only way you can get the weight down on a bigger HP engine is to go with 2 stroke and then you are stuck buying secondhand unless you are commercial and running on lochs in scotland they are stopping you using them from 2020 on, but don’t be telling people that a 9.9 hp is the same weight as a 20hp or 25 hp keep it real.
9.9 hp is not the same size as a 20/25 hp lol
Yes they are usually the same weight cowling size.