Видео

their customer service is disgusting they will lock your account even if you login from a different device and make an excuse it is gone forever due to a security breach refuse to open it back even at a branch and make you go through all these hoops to move your money. Their own employees have to be on hold!!

I just changed both of mine and I have to say I thought it was pretty simple considering and I'm not super mechanically inclined but these videos definitely help

Helpful and straightforward, thanks!

I just bought a pair and the right angle tips come out of the ends at about a 30 degree angle - useless.

You're the man. TY.

Life saver. Thank you !

🤦‍♂

bs-video . you should read the effing manual BeFORe posting stupid videos

I just ordered this exact mirror and I'm pretty sure the sent me the wrong one. How do I fix this?

Don’t be fooled into believing this thing will start a Big Truck the worst 450.00 dollars I’ve spent

I have a 2022 Kona N-line with LED headlights. Apparently, they are a sealed unit, and cost $1100 Canadian! I hope they last for ten years?

What size are your shorts? Waist size.

This helped me a lot thank you so much I was recently in a accident and that’s one of the pieces I need to get out and today I was stressing out because I couldn’t find a way to get that bolt out and now I do so thank you so much 🙏🏻🙏🏻

I have a problem with which when I turn it on it only gives me 6v. I say this because I put a current tester on it and it only gives me 6v and it doesn't stop beeping. I put it to charge all night and it didn't charge and if I put it on 12v it doesn't stop beeping. Do I have to turn it off? Is there a solution? ❤

Will this be the same for a 2020 tucson se awd?

The 3400 is rated higher because it can start 24 v systems like tractors..hence the higher gauge cables and bigger battery

does the pin on TCE actually engaged with the paw to provide a second paw engagement safety?

Thanks! Very helpful. Next time, it'll take 15 minutes, 1st, 3 hrs. On drivet's side very easy to confuse lo beam & hi beam. They both have round cover. Use wheel well access hole, no confusion plus more room for hands to work. Also, very easy to plug bulb in...backwards. notch on bulb MUST align with notch on socket. And FYI, owner's manual says disconnect negative battery cable..ENJOY!

Thank you for the video !

Why not just use an electric transfer pump if you're gonna hook up to an outlet anyway? The best use case for these seem to be as a sump pump backup if the power goes out, or for transferring auto fluids when you're too far from an outlet

No shot i found this. I was looking at the exact same video, ended up looking at the BigRed version of this which looks identical to the TCE. Going back and forth on which one to get (big red or tce). I might go with TCE for the blue. How are they 1 year later?

How hard would it be to swap a 3.5 in the car out of interpid are 300m ??

Hi, to test the horn with the pink wire using terminal 25 needs the battery connected also or disconnected, I tried and the negative was disconnected, I had no sound from the horn but the relay was clicking, I am wondering if I got no sound because of the battery being disconnected

Great video. Very informative. Thanks!

Is there 3 bolts

Tell me you were the least intelligent in the class without telling me you were the least intelligent in the class

That, "shiiit", was so real, as a D.I.Y.er I felt that. Lol. Thank you for the video.

Muy interesante,para hacer el video debiste haber creado las condiciones,iluminación,trabajar con las dos manos

Omg thank you for this! Mine just went out last night and I couldn't find any information haha. This is great. 👌🏼

who told you that you wouldnt need to bleed the brakes, ANY time you open a hydralic line you get air in the system, it might not be much but its there, you might bleed out a lot of fluid from each line (length of line from the point you opened it) but you will find bubbles. even if the pedal feels good now, a small bubble in the line wont make the pedal go to the floor, thats the result of an open/expanding line or a bad master cylinder. ALWAYS bleed your brakes folks

Did it read a code or how did you know it needed to be changed?

Is it necessary to disconnect the negative battery cable? The owners manual says to do so ??? Please advise.

Yup worked like a charm! Had it out in 2 minutes

I just wanted to say great video man! I had the exact same problem did the exact same thing that you did and it came right out

Thanks for the video. mine had a "trap door" in the wheel wells to make things a little bit easier.

Man, you actually just saved my ass. Thank you 😂

Add a catch can while you are in there. Prevents some of the sludge buildup on the intake valves.

Thanks fam

Can i use this as a power bank. And how many MAH

Hello, does this procedure apply to Kona 2022 as well? Thank you

I agree with the other guys comment i think thats a great tip and or alternative or the standard procedure dont work thank u

Thank you so much for the video ❤❤❤❤❤ I am a woman 👩 and I did this by myself ❤I am so proud of me ❤

Greatly appreciated! Thank you.

The round dust-cover door doesn't even exist in our 2018 Kona. There's a square thing there with nothing to remove.

garbage vide

1/4 is for low torque applications

Thanks for your help. I couldn't get it from the bottom because Mines have 2 screws on the bottom and the one on top is different. And I didn't have it 24 either but I was luckily able to get it from the hood..Mannn It's a struggle when you have super big hands like mines But it saved me some bucks thanks 😊

Is this wire very flexible or no?

You just saved me 60 bucks thanks!!

This video is helpful! Thank you