Видео

G'day Phil. I'm on my 3rd R600 like yours at the start of the video. Great when when it works. First one 3 days, 2nd one almost 12 months. 3rd one still going but one USB C port has stopped working. Very light use and not mistreated. To be fair they they replaced it twice but postage required makes it less than good value. Fingers crossed it will keep going.

Good on you for being transparent Phil. Many youtubers don't say that. It is important they know. Well done.

love your work Phil.

A great honest review Phil, I have the All Powers 1500w power station and find it very helpful in my shed for charging batteries an running some power tools but it’s primary use is to run my 60 ltr Engel fridge freezer coupled to the All Powers 200w solar panel.This combination worked great at Goomburra valley last year at the camp out even thow we couldn’t get full sun all day on the panel. We’re also looking forward to the cooler weather to start training again.

Great video mate. Thanks for being honest about your concerns about the lithium iron , like you said it is not really a problem unless you use it incorrectly. I have one of the allpowers power stations as well. It has the lithium phosphate and it is awesome we use it all the time. Good to see you back on RUclips again so it’s been awhile. Keep up the great work.

Doesnt work

They melt because people use cheap no-name fuses that come with them or buy no-name fuses from Amazon. There's a guy on RUclips who was tested the no-name fuses and was able to put 20A through a 5A fuse for 20 minutes. Use name brand fuses that have been tested. They work as advertised.

Just got my little smoker😊 Would like to do a ham, small one . There were no instructions. Thank you for your beginner brisket. I was not sure how to set up ,to get going 😊 California out side cooking 👍🍬

Hello from America 🇺🇸 Phil, do you think a 12 inch pizza would fit in that Winnerwell oven? Thank you and God bless you and your family and America 🇺🇸

thanks Phil, great review mate

Hi Phil. My 12 brass monkey ice maker is great. Problem is, I left it for a time with water in it and it is covered with mould inside. I put a mixture of vinger and water through it. Which cleaned most of the mould out. I can see at the back where the ice forms on the prongs that there is still mould. Is there any way of opening up the top of the machine to give it a good clean?

Hi Phil love your videos, we also have one and very happy with it although we need to service it and are struggling to find anyone that will service them. We are in the Mackay QLD region hope you can help Thanks Kylie

😊 Great review!

Surprised you didn’t use the water tray😵‍💫

Does anyone know if you can take the top off to clean the ice maker section. We accidentally left water in it and didn't use it for a while. The black thick mould at the maker is so horrible.

Your towball weight is measured at the towball hitch so where your jockey wheel is it is actually got more weight on it.

I just picked one of these up and I'm going to do some smoking for the first time. Any advice on good wood and rubs for a ham?

I have an Ostrich wing and I’ve been trying to deal with water pooling since I purchased it 3 years ago. It’s the only thing that annoys me about it. I have tried to get the canvas tighter and the rear arm is maxed out and still it pools between each arm.

how to drain the water from the unit when not in use please?

How’s the ice maker going after a few years?

Great ! Thanks !

Appreciate the vid Phil and pointing out the campsites. How does the beach fish?

Bought one of these a few weeks back. Does any one else using it notice that it seems to struggle sometimes burning up all of the charcoal even with the top vent fully open. Opening the bottom of the vent is an idea i though of but wouldn't that just let more heat escape and lose temperature?

My 1225D RedArc runs for 2 hours full charge rate, resets after 20 mins of the charge rate system pulse, float etc. then goes back to what is needed up to 25 amps, 21 amps actual i am getting. But i have gone over all earth circuits for better performance. All connections and cables rated at least double what is required and distance. The main problem i see is the battery being too big for car alternators, 200 Amp Hour or more then you will have to take a lot more things into consideration. I think it is to protect batteries, alternator and wiring as these devices can get quite warm after running at full charge rate for an hour or two. Also temperature sensor inside device can limit output at times but also should reset after about 20 mins if working correctly. RedArc 1250D issues you are having you should speak to a RedArc Specialist. Maybe increase your main starter battery size to match your larger secondary battery as if there is a massive difference between Amps/AmpHours then this causes a lot of issues.

Something is not right if they both weigh about same but materials are heavier duty in one?

Thank you so much for the video. I lost my manual and forgot how to use mine. Winnerwell doesn't have their manuals available online. So you have been a lifesaver. Thanks again ❤❤

I can't find those 3 piece bullet smoker in the US like your Jumbuck smoker , I started out with a smoker like your Jumbuck back in 1997 for $25:00 US back to basics it cooks amazingly for a little bit of money 💰.

Best review on RUclips. Does the 2.1m include the storm flap at the bottom? Thanks. Considering purchasing for mine.

Lol I’ve never heard of dirty wood little bit kinky maybe morning wood ! the wood is green. It’s wet or not seasoned. Perhaps you shouldn’t own a wood stove.

Have you had the pajero long, how would you rate them.

I just bought a crusader pathway twin axle, love it

Thanks Phil , hope you enjoy the new store . Thanks for showing us around . Keep ‘em coming ! 👍👍🍻🍻

Great stores now. Kings have really improved over the years and have just about everything you need.

We may have to go for a drive down to Bundaberg and check it out one day soon. Thanks Phil.

How'd you go Phil did you get a start.....😁

Lovely ep and shop Phil. We have 4 bits of kings kit and all been working faultless.

In your element Phil

Can you do a CO PPM measurement at the exhaust at low and high setting to see how efficiently it’s been tuned?

why did you connect via VE.Direct and not BLE? Just wondering...

u have got to be kidding , another vid on a bloody heater, oh its got wifi , something totally not needed and another thing to fail i wouldnt buy this crap product ..keep it simple stupid

Very informative video Phil,looking forward to seeing the next in the series. Cheers 👍

The two side pieces, could you leave em attached when you fold the awning away? Will watch the rest in case you address that in the video.

If the fuse-holder melts, the current through it is way to high.... Always check the max current of the holder itself and never exceed that!

Great review mate, I own 3 of these and I’ve owned a lot of fridge freezers over the years and these beat every single one on the market. I have one in my shed one in the boat and one in the fourby.. I will never buy anything else then kickass fridges again, for the price there are extremely reliable and affordable highly recommended products by far..

This was like watching an old Laurel and Hardy movie 🤣🤣😂😂

My dream stove is the Winnerwell Nomad large with the windows. I really want to get one to install it in my 1967 GM city bus that I live in full-time but i can't afford it so I still don't have any heat, maybe one day

thank you for the video

Old mate needs to work on his cardio. Good clip tho.

Thanks Phil , good to see you again . Keep ‘em coming ! 👍👍🍻🍻

Looking forward to seeing your reviews Phil, both the heater and the Allpowers power pack. Cheers.