Leo Tech Lab
Leo Tech Lab
  • Видео 67
  • Просмотров 72 504
Instalar Klipper com Docker (Windows e Linux)
Hoje vamos falar de impressão 3D, e vou mostrar-vos como instalar o Klipper na vossa impressora 3D usando Docker, em Windows e Linux, passo a passo.
Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução.
Bora lá!
---
GitHub do prind: github.com/mkuf/prind
GitHub do KIAUH: github.com/dw-0/kiauh
---
O meu video de "Docker no Windows com dispositivos USB": ruclips.net/video/ykhWDqdChdc/видео.html
O meu video de "Potencia o teu servidor Windows com uma VM Linux": ruclips.net/video/x-5n9gX8hRA/видео.html
O meu video de "Introdução ao Docker": ruclips.net/video/ZnUdl-Vpmd0/видео.html
O meu video de "Instalação do OctoPrint no Windows": r...
Просмотров: 453

Видео

Install Klipper with Docker (Windows and Linux)
Просмотров 2,2 тыс.5 месяцев назад
Today we're going to talk about 3D printing, and I'm going to show you how to install Klipper on your 3D printer using Docker, on Windows and Linux, step by step. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at introduction video. Let's go! GitHub for prind: github.com/mkuf/prind GitHub for KIAUH: github.com/dw-0/kiauh My "Docker on Windows with USB devic...
realme Buds Air 5 Pro wireless earbuds Review
Просмотров 1,8 тыс.5 месяцев назад
Today the topic is wireless earbud reviews, and I'm going to review the realme Buds Air 5 Pro. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at the introduction video. Let's go! Mic Test - realme Buds Air 5 Pro: ruclips.net/video/Gg2aZm3YZNo/видео.html Wireless Earbud Review Ranking: 1drv.ms/x/s!AubmRObJpOucmb5RESgYhcNPRaxAAw Evaluation process explanation...
Mic Test - realme Buds Air 5 Pro
Просмотров 1,5 тыс.5 месяцев назад
Today the topic is wireless earbud reviews, and I'm going to test the microphones of the realme Buds Air 5 Pro. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at the introduction video. Let's go! realme Buds Air 5 Pro Review (EN): ruclips.net/video/9a4Lynl_AEk/видео.html realme Buds Air 5 Pro Review (PT): ruclips.net/video/9vrwHu7uHZM/видео.html Wireless Ea...
Review dos earbuds sem fios realme Buds Air 5 Pro
Просмотров 9565 месяцев назад
Hoje o tópico é análises de earbuds sem fios, e vou analisar os realme Buds Air 5 Pro. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! ERRATA: 03:06 - Aparece cortado "10 min = 7 horas (fast charging)" Mic Test - realme Buds Air 5 Pro: ruclips.net/video/Gg2aZm3YZNo/видео.html Ranking de earbuds sem fios: 1drv.ms...
Docker no Windows com dispositivos USB
Просмотров 5405 месяцев назад
Hoje vamos falar de virtualização, e vou mostrar-vos como instalar o Docker no Windows, passo a passo. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! O meu video de "Potencia o teu servidor Windows com uma VM Linux": ruclips.net/video/x-5n9gX8hRA/видео.html O meu video de "Introdução ao Docker": ruclips.net/vid...
Install Docker on Windows with USB devices
Просмотров 6335 месяцев назад
Today we're going to talk about virtualization, and I'm going to show you how to install Docker on Windows, step by step. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at introduction video. Let's go! My "Enhance your Windows server with a Linux VM" video: ruclips.net/video/w7-3KQrG8uw/видео.html My "Introduction to Docker" video: ruclips.net/video/k_l8pU_...
Potencia o teu servidor Windows com uma VM Linux
Просмотров 3195 месяцев назад
Hoje vamos falar de virtualização, e vou mostrar-vos como instalar uma máquina virtual Linux no Windows, passo a passo. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! Link do post sobre "bridging" de redes Wifi: forums.virtualbox.org/viewtopic.php?p=473039#p473039 O meu video de "Luzes a Piscar em Video": rucli...
Enhance your Windows server with a Linux VM
Просмотров 3535 месяцев назад
Today we're going to talk about virtualization, and I'm going to show you how to install a Linux virtual machine on Windows, step by step. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at introduction video. Let's go! Link to the post about Wifi network "bridging": forums.virtualbox.org/viewtopic.php?p=473039#p473039 My "Light Flicker in Video" video: rucl...
Luzes a Piscar em Video
Просмотров 777 месяцев назад
Hoje vamos falar de luzes a piscar em video, porque é que aparecem, e como é que as podemos evitar. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! O meu video de "DNG vs RAW": ruclips.net/video/5d8CgFbPLjw/видео.html O meu video de "Review dos earbuds sem fios SoundPeats Engine 4": ruclips.net/video/UZQKtcEeGg8...
Light Flicker in Video
Просмотров 337 месяцев назад
Today we're going to talk about light flicker in video, why it happens, and how to fix it. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at introduction video. Let's go! My "DNG vs RAW" video: ruclips.net/video/ZmEbRy2ILFA/видео.html My "SoundPeats Engine 4 wireless earbuds Review" video: ruclips.net/video/PWNI0eVP3N0/видео.html My "Install OctoPrint on Wi...
DNG vs RAW
Просмотров 1828 месяцев назад
Today we're going to talk about the DNG vs RAW debate. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at introduction video. Let's go! My "Photo File Formats" video: ruclips.net/video/7wF37lIRWNo/видео.html My "SoundPeats Engine 4 wireless earbuds Review" video: ruclips.net/video/PWNI0eVP3N0/видео.html My "Install OctoPrint on Windows" video: ruclips.net/vi...
DNG vs RAW
Просмотров 558 месяцев назад
Hoje vamos falar sobre o debate DNG vs RAW. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! O meu video de "Formatos de Ficheiros de Fotos": ruclips.net/video/zXneC9VSS54/видео.html O meu video de "Review dos earbuds sem fios SoundPeats Engine 4": ruclips.net/video/UZQKtcEeGg8/видео.html O meu video de "Instalaç...
Mic Test - SoundPeats Air4 Pro
Просмотров 1,4 тыс.9 месяцев назад
Today the topic is wireless earbud reviews, and I'm going to test the microphones of the SoundPeats Air4 Pro. I'm Leo, and this is my channel, Leo Tech Lab. If you don't know it yet, take a look at the introduction video. Let's go! SoundPeats Air4 Pro Review (EN): ruclips.net/video/XqekBEyURUs/видео.html SoundPeats Air4 Pro Review (PT): ruclips.net/video/wQtQIgk5E9g/видео.html Wireless Earbud R...
Review dos earbuds sem fios SoundPeats Air4 Pro
Просмотров 2039 месяцев назад
Hoje o tópico é análises de earbuds sem fios, e vou analisar os SoundPeats Air4 Pro. Eu sou o Leo, e este é o meu canal, Leo Tech Lab. Se ainda não o conhecem, dêem uma vista de olhos ao video de introdução. Bora lá! Mic Test - SoundPeats Air4 Pro: ruclips.net/video/cQ3dEKNXAkA/видео.html Ranking de earbuds sem fios: 1drv.ms/x/s!AubmRObJpOucmb5RESgYhcNPRaxAAw Video da explicação do processo de ...
SoundPeats Air4 Pro wireless earbuds Review
Просмотров 6629 месяцев назад
SoundPeats Air4 Pro wireless earbuds Review
Mic Test - Baseus Bowie MA10
Просмотров 1,6 тыс.9 месяцев назад
Mic Test - Baseus Bowie MA10
Review dos earbuds sem fios Baseus Bowie MA10
Просмотров 3809 месяцев назад
Review dos earbuds sem fios Baseus Bowie MA10
Baseus Bowie MA10 wireless earbuds Review
Просмотров 2,4 тыс.9 месяцев назад
Baseus Bowie MA10 wireless earbuds Review
Mic Test - Soundcore Liberty 4 NC
Просмотров 12 тыс.9 месяцев назад
Mic Test - Soundcore Liberty 4 NC
Review dos earbuds sem fios Soundcore Liberty 4 NC
Просмотров 2249 месяцев назад
Review dos earbuds sem fios Soundcore Liberty 4 NC
Soundcore Liberty 4 NC wireless earbuds Review
Просмотров 8029 месяцев назад
Soundcore Liberty 4 NC wireless earbuds Review
Mic Test - Jabra Elite 4 Active
Просмотров 2,5 тыс.9 месяцев назад
Mic Test - Jabra Elite 4 Active
Jabra Elite 4 Active wireless earbuds Review
Просмотров 1799 месяцев назад
Jabra Elite 4 Active wireless earbuds Review
Review dos earbuds sem fios Jabra Elite 4 Active
Просмотров 1839 месяцев назад
Review dos earbuds sem fios Jabra Elite 4 Active
Review dos earbuds sem fios Soundcore Liberty 4
Просмотров 1119 месяцев назад
Review dos earbuds sem fios Soundcore Liberty 4
Soundcore Liberty 4 wireless earbuds Review
Просмотров 5359 месяцев назад
Soundcore Liberty 4 wireless earbuds Review
Mic Test - Soundcore Liberty 4
Просмотров 1,3 тыс.9 месяцев назад
Mic Test - Soundcore Liberty 4
Mic Test - Soundcore Liberty 3 Pro
Просмотров 7359 месяцев назад
Mic Test - Soundcore Liberty 3 Pro
Soundcore Liberty 3 Pro wireless earbuds Review
Просмотров 3289 месяцев назад
Soundcore Liberty 3 Pro wireless earbuds Review

Комментарии

  • @Kneadingkitty
    @Kneadingkitty 2 дня назад

    Thank you for the video. Is there any cons with using Windows pc over linux?

    • @LeoTechLab
      @LeoTechLab 2 дня назад

      In my experience, none. In fact, I use mostly windows servers, but both windows and linux work fine for this use case. You are welcomed to check out my Linux tutorial for this topic as well.

  • @rajavanya
    @rajavanya 7 дней назад

    Great test, can you please make one for airpods pro 2? I need help deciding between the two.

    • @LeoTechLab
      @LeoTechLab 7 дней назад

      Thank you for your feedback! I'm an android user, so I don't use airpods, sorry.

  •  9 дней назад

    THANK YOU FOR THIS! Amazing how you test the mic properly

    • @LeoTechLab
      @LeoTechLab 9 дней назад

      Thank you very much for the feedback, really appreciate it! 👍

  • @kashifone1
    @kashifone1 10 дней назад

    another deep review, thanks for that

    • @LeoTechLab
      @LeoTechLab 10 дней назад

      Thank you for the feedback!

  • @kashifone1
    @kashifone1 10 дней назад

    thanks for that deep review, appreciated 🤓

  • @kashifone1
    @kashifone1 10 дней назад

    try to manage your video under 10 min, or you can made short version of your review, thanks

  • @raulceleita
    @raulceleita 12 дней назад

    Gracias ..Excelente explicación ...no podía configurar la cámara hasta que vi el video...gracias

    • @LeoTechLab
      @LeoTechLab 12 дней назад

      Muchas gracias por los comentarios. ¡Me alegro de que el video haya sido útil!

  • @alyhassan8817
    @alyhassan8817 22 дня назад

    I really appreciate this video

  • @AlfonzWarThunder
    @AlfonzWarThunder Месяц назад

    Very good tutorial

    • @LeoTechLab
      @LeoTechLab Месяц назад

      Really appreciate the feedback👍

  • @lompo672
    @lompo672 Месяц назад

    Thank you sir

  • @RyanTheGamer151
    @RyanTheGamer151 Месяц назад

    My printer is connecting as USB Serial instead of a COM port, do you know how to fix this?

    • @LeoTechLab
      @LeoTechLab Месяц назад

      COM ports are serial interfaces. USB serial interfaces are also represented by COM ports in windows. I don't understand what the problem is...

    • @RyanTheGamer151
      @RyanTheGamer151 Месяц назад

      @@LeoTechLab Oh, in Device manager instead of showing up in COM and LPT is shows up in Other devices as USB Serial and it has an exclamation mark next to it. And when it's like that it doesn't connect to octoprint

    • @LeoTechLab
      @LeoTechLab Месяц назад

      What is the reported problem by the USB serial device? It could be a driver issue, maybe... Is this the first time you're trying to connect your printer to this PC?

  • @stephenward8466
    @stephenward8466 Месяц назад

    Nice one I've struggled for ages trying to get my cam to work until I found this you just got a new subscriber thankyou

    • @LeoTechLab
      @LeoTechLab Месяц назад

      Thank you very much for the feedback! Glad it was useful 👍

  • @criscaires6713
    @criscaires6713 Месяц назад

    2 meses de uso e parou de conectar o lado esquerdo,NÃO RECOMENDO!

    • @LeoTechLab
      @LeoTechLab Месяц назад

      É sempre chato quando o produto não corresponde em termos de durabilidade... efectivamente a robustez deles não é a melhor. A minha recomendação actual são os Realme air 5 pro, que continuo a usar diariamente desde que os testei aqui no canal.

  • @viagensbrasil588
    @viagensbrasil588 Месяц назад

    Excelente explicação! Obrigado

    • @LeoTechLab
      @LeoTechLab Месяц назад

      Muito obrigado pelo feedback ;)

  • @KH-Ahmed-l5t
    @KH-Ahmed-l5t Месяц назад

    wooow thanks best video

    • @LeoTechLab
      @LeoTechLab Месяц назад

      Thank you for the feedback! 👍

  • @joseguevara184
    @joseguevara184 Месяц назад

    What about Wifi cameras, nothing yet.... got a TAPO camera and can´t use it directly in Octoprint PC.

    • @LeoTechLab
      @LeoTechLab Месяц назад

      IP cameras don't operate the same way as USB cameras, that's why you can't use them as direct replacements for USB cameras, but it is possible to integrate an IP camera feed into your octoprint workflow, with some effort, although I only use my IP camera for remote monitoring of my prints when I'm not at home.

  • @doaaehab1110
    @doaaehab1110 Месяц назад

    Appreciated

  • @JohnnyVichi
    @JohnnyVichi Месяц назад

    thank you!!!

  • @rahislanlima
    @rahislanlima Месяц назад

    Ótimo vídeo com diferentes elementos e configurações para realização dos testes, parabéns

    • @LeoTechLab
      @LeoTechLab Месяц назад

      Muito obrigado pelo feedback! 👍

  • @cytherion
    @cytherion Месяц назад

    no ANC test? does ANC work with mic?

    • @LeoTechLab
      @LeoTechLab Месяц назад

      I test, score and rank all earbuds for ANC.

  • @arthurguimaraes6917
    @arthurguimaraes6917 2 месяца назад

    Assisti o vídeo em inglês inteiro até descobrir que tinha outro em português 😂

  • @outdoorsywannabe1888
    @outdoorsywannabe1888 2 месяца назад

    Is there just liberty 4? Or only liberty 4 nc? I dont see just liberty 4 on amazon. Help me lol

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Both are available. I have reviewed them both.

  • @JarnoSuni1
    @JarnoSuni1 2 месяца назад

    Which app do you use to record voice?

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Currently using OBS

  • @gmbarTR
    @gmbarTR 2 месяца назад

    THANK YOU

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Glad it was useful👍

    • @gmbarTR
      @gmbarTR 2 месяца назад

      I tried to do this for 3 hours until I found this video, very explanatory thank you

    • @gmbarTR
      @gmbarTR 2 месяца назад

      I found the video helpful so I subscribed and liked it.

    • @gmbarTR
      @gmbarTR 2 месяца назад

      Timelapse when setting up webcam I deleted ffmeg file How can I bring it back?

    • @gmbarTR
      @gmbarTR 2 месяца назад

      I liked and subscribed because I found the video helpful.

  • @HOROQ97
    @HOROQ97 2 месяца назад

    Thanks for the video. Amazing sound recording of your test.

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Thank you for the feedback, really appreciate it👍

  • @FallingSystem
    @FallingSystem 2 месяца назад

    Great video bud, keep it up!

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Thank you for the feedback👍

  • @Mujahed.
    @Mujahed. 2 месяца назад

    Great review with different real life scenarios. Appreciate your effort

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Really appreciate the feedback, thank you!

  • @nazarottto
    @nazarottto 2 месяца назад

    This is how a mic test should be done!

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Thank you very much for the feedback!

    • @h00015788
      @h00015788 2 месяца назад

      Exactly

  • @paulbentley849
    @paulbentley849 2 месяца назад

    Not good in a noisy environment

  • @URENOTHEONE
    @URENOTHEONE 2 месяца назад

    Woow

  • @vitaliydvorkin1342
    @vitaliydvorkin1342 2 месяца назад

    Hi, I added a few instances of octoprint to my Raspberry pi and they work great thanks to you, but I came across a problem. I originally installed the Ubuntu kernel on a 32gb micro SD card and now it seems like it's not enough for all the instances I am running. I also added a 500gb ssd card using the argon case. The octoprint instances can't see the drive and I think it's going to cause an issue if the SD card fills up. Is there a way to get three octoprint instances to see the drive?

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Sure, you can share a new host directory with any docker container, even multiple containers at the same time. Just mount it as a volume in the docker-compose of each container you want to provide shared access to.

    • @vitaliydvorkin1342
      @vitaliydvorkin1342 2 месяца назад

      @LeoTechLab is that in the bottom portion of the docker-compse file?.where it says volumes: octoprint?

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      @vitaliydvorkin1342 exactly, just add a new line mapping a local host directory (your new drive, for example) to a directory inside your container. That way your container can access the new drive using that volume mount. You can refer to the docker manual on volumes for more information. But this really depends on what exactly you are trying to achieve...

    • @vitaliydvorkin1342
      @vitaliydvorkin1342 2 месяца назад

      @LeoTechLab pretty much just add more storage options. I tried moving a container but I ended up deleting it and making a new one somewhere else and that didn't add new data. I even changed the volume from the original octoprint:/octoprint to the mount point of the ssd and the new instance octoprint still only had 32 gb max

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      That's because that specific octoprint docker image was probably created with that allocated space to begin with. I think you can override that setting, look it up in the docker documentation.

  • @Finneous101
    @Finneous101 2 месяца назад

    Great review

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Thank you for the feedback👍

  • @RickBel1996
    @RickBel1996 2 месяца назад

    Leo muito boa a aula, bem explicada e didatica, segui os passos e deu tudo muito certo só não consegui fazer com que inicie quando ligo o windows, não sei o motivo mas o agendamento só funciona quando reinicializo o sistema, se deligar e ligar não funciona. Parabnes pelo trabalho e agora vou pra outra tarefa que é instalar o Klipper em minha impressora, Obrigado!!!!!

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Muito obrigado pelo feedback, ainda bem que foi útil! Relativamente ao agendamento via task scheduler, ele só executa quando o sistema é reinicializado porque estou a usar o trigger "at startup", que literalmente significa "no arranque do sistema", ou seja, quando o mesmo é reiniciado. Para outro cenário de arranque automatizado é mudar o trigger para o pretendido👍 Atenção que se estiver a usar hibernação para desligar o computador, ele na verdade nunca vai executar a task, porque não fez um reboot, manteve o estado anterior do sistema operativo. Aí a solução é desligar a hibernação ou então mudar o evento para "resume from hibernation". Eu recomendo desligar a hibernação, porque dessa forma temos uma só regra e o mesmo evento de "at startup" funciona para os dois cenários: reboot e desligar/ligar.

    • @RickBel1996
      @RickBel1996 2 месяца назад

      @@LeoTechLab Oi Leo, fiz uma pesquisa para poder executar o arquivo.bat na inicialização e encontrei uma solução mais certeira que faz a maquina inicar sempre que o windows é ligado e fui mais longe criando tambem um arquivo que é executado automaticamente quando se faz logout no windows. Devo confessar que esse ultimo acredito que funcione já que não tenho comosaber ao certo. Fiz o teste diversas vezes e correu tudo bem em todas. Abaixo passo o procedimento para caso tenha interesse, mas imaginando que pra voce isso não é nenhuma novidade, rsrsrs. Peço desculpaspela ousadia que querer ensinar a missa ao vigário, mas fiquei tão setisfeito com suas aulas que me senti obrigado a retribuir, mesmo sendo de forma tão simples, obrigado! Para executar um arquivo .bat na inicialização do Windows sem que a janela do CMD apareça, você pode usar um script em VBScript. Aqui estão os passos: Crie um arquivo .vbs: Abra o Bloco de Notas. Copie e cole o seguinte código: Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\caminho\para\seuarquivo.bat" & Chr(34), 0 Set WshShell = Nothing Substitua C:\caminho\para\seuarquivo.bat pelo caminho do seu arquivo .bat. Salve o arquivo com a extensão .vbs, por exemplo, iniciar_oculto.vbs. Adicione o script à inicialização: Pressione Windows + R, digite shell:startup e pressione Enter. Copie o arquivo .vbs que você criou para a pasta que abriu. Para executar um arquivo .bat antes de desligar o Windows de maneira oculta e com um atraso de 40 segundos, você pode seguir estes passos: Crie um arquivo .bat: Abra o Bloco de Notas. Copie e cole o seguinte código: @echo off vmrun -t player stop "C:\VMs\Ubuntu Server\Ubuntu 64-bit.vmx" soft timeout /t 40 Salve o arquivo com a extensão .bat, por exemplo, executar_antes_desligar.bat. Crie um arquivo .vbs para ocultar a execução: Abra o Bloco de Notas novamente. Copie e cole o seguinte código: Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\caminho\para\executar_antes_desligar.bat" & Chr(34), 0 Set WshShell = Nothing Substitua C:\caminho\para\executar_antes_desligar.bat pelo caminho do seu arquivo .bat criado no passo anterior. Salve o arquivo com a extensão .vbs, por exemplo, executar_oculto.vbs. Configure o Agendador de Tarefas: Pressione Windows + R, digite taskschd.msc e pressione Enter para abrir o Agendador de Tarefas. Clique em “Criar Tarefa”. Na aba “Geral”, dê um nome para a tarefa, por exemplo, “Executar BAT antes de desligar”. Marque a opção “Executar estando o usuário conectado ou não” e “Executar com privilégios mais altos”. Vá para a aba “Disparadores” e clique em “Novo”. Em “Iniciar tarefa”, selecione “Em um evento”. Em “Log”, selecione “Sistema”. Em “Origem”, selecione “User32”. Em “Id. do Evento”, digite “1074”. Vá para a aba “Ações” e clique em “Novo”. Em “Ação”, selecione “Iniciar um programa”. Em “Programa/script”, navegue até o arquivo .vbs que você criou. Clique em “OK” para salvar a tarefa.

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      @@RickBel1996 Obrigado pela partilha! Informação é poder, e partilhar a mesma é essencial para podermos todos aprender uns com os outros para evoluirmos em conjunto ;)

  • @cwells35
    @cwells35 2 месяца назад

    Hey, this worked great overall! Install was really easy and I can control the printer. The one problem I'm having is that the gcode files sent from my slicer don't end up in the 'correct location' leading Moonraker to warn that the gcode path received from Klipper does not match the expected location. I can't seem to find the expected location (/opt/printer_data/gcodes) to edit the [virtual_sdcard] section of the config. Any thoughts on this issue?

    • @LeoTechLab
      @LeoTechLab 2 месяца назад

      Hi! Glad it was useful ;) Regarding your gcode directory, I'll start by asking if you already added the [virtual_sdcard] section to your printer config file? If not, please do so and point it to "/opt/printer_data/gcodes". If the problem persists, please read the rest ;) Just to be clear, given that this is using docker, the "/opt/printer_data/gcodes" only exist inside the docker volume "gcode", accessible by both klipper and moonraker. I'm not sure how your slicer is configured to interact with klipper, but if it is using the Moonraker APIs directly, it shouldn't have any problems uploading the gcode file to klipper. If, on the other hand, it is trying to access the file system directly, it won't find the "/opt/printer_data/gcodes" folder on the host system, because it does not exist in it. As I already said, it is a docker volume that is only accessible directly by docker containers that request it, such as klipper and moonraker. You can try and manually upload the file using fluidd or mainsail directly. If that works fine, I would say the problem is probably in the integration between the slicer and klipper. If by any chance this integration is the problem, and if you want to continue using the slicer integration, you can always try to switch the docker volume for a docker bind mount and mount a physical directory on your host system. Maybe that will help the slicer integration. Just change the all the volume mappings from "gcode:/opt/printer_data/gcodes" in the docker-compose.yaml of prind to "/opt/printer_data/gcodes:/opt/printer_data/gcodes", and ensure that you also create the "/opt/printer_data/gcodes" directory in your host system. This will bind mount this host directory to the virtual directory with the same name inside the docker containers. Hope this helps.

  • @gggffffccc6951
    @gggffffccc6951 3 месяца назад

    Which earbuds best for microphone call Anker liberty 4 Or anker liberty 4 nc Or anker liberty 3 pro

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      For mic alone, Liberty 4 are the best of those 3.

    • @gggffffccc6951
      @gggffffccc6951 3 месяца назад

      @@LeoTechLab can you rank them ?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      @gggffffccc6951 I already did. You have the rankings in my excel spreadsheet, it's referenced in the description of all my earbuds videos.

  • @VídeosOnline-d7t
    @VídeosOnline-d7t 3 месяца назад

    Redmi buds 5 pro ou o realme buds Air 6 pro?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Não testei nenhum deles, mas gostei imenso dos realme buds Air 5 Pro, e pelo que percebi quase nada mudou para a versão 6.

    • @VídeosOnline-d7t
      @VídeosOnline-d7t 3 месяца назад

      @@LeoTechLab faz a comparação do redmi buds 5 pro por favor

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      @VídeosOnline-d7t Talvez um dia se proporcione😉

  • @freeaudiobooks7469
    @freeaudiobooks7469 3 месяца назад

    Finally a good test. Great work

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback, really appreciate it!

  • @willlee6457
    @willlee6457 3 месяца назад

    Great review. Thanks!

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback, glad it was useful👍

  • @giuseppethesantis
    @giuseppethesantis 3 месяца назад

    Great video! Do you think these are better than the soundcore liberty 4 NC in therms of sound quality? Considering also the EQ

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback! Yes, these do edge out the Liberty 4 NC in terms of sound quality, especially for their dual driver setup, in my opinion.

    • @giuseppethesantis
      @giuseppethesantis 3 месяца назад

      @@LeoTechLab Thank you so much! I bought the Realme for 60 euros 😃 im just a bit worried for the bad reviews about the battery life, and some reviews that talks about one of the earbud stop working.. this last problem its the one i need to avoid the most cause it already happened two times forbother wireless buds..

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Great price on the realmes! So far mine have been working very well. Hope you like them! Enjoy👍

    • @giuseppethesantis
      @giuseppethesantis 3 месяца назад

      @@LeoTechLab Thank mate! I hope so! One last thing, i saw that the 60hz frequencies are not present in the eq, Does this aspect make it more complex to obtain the sound you want, or does it not create particular difficulties?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      In my case, the "Nature Balance" preset is great, so I didn't have to use the eq.

  • @giuseppethesantis
    @giuseppethesantis 3 месяца назад

    Hi! great review!! In terms of sound quality do you think they are better than the realme buds air 5 Pro or not? :D

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback! In my opinion, the realme buds Air 5 Pro edge out the Liberty 4 NC in terms of sound quality, especially for their dual driver setup.

  • @GilHighTechSilva
    @GilHighTechSilva 3 месяца назад

    Estou à rasca… estou aflítissimo

  • @GilHighTechSilva
    @GilHighTechSilva 3 месяца назад

    Why so serious?

  • @GilHighTechSilva
    @GilHighTechSilva 3 месяца назад

    Vou já ver o teu vídeo, pa

  • @GilHighTechSilva
    @GilHighTechSilva 3 месяца назад

    Estou aflitíssimo

  • @user4name
    @user4name 3 месяца назад

    so which is betetr mic than anker lib 4 nc ? huwaie 5i or 6i or something else ?anything something similar price range?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      realme buds Air 5 Pro. You can watch my review on them, and you have my full listing of earbuds to compare mic quality as well in the video description.

    • @user4name
      @user4name 3 месяца назад

      @@LeoTechLab thanks gonna watch it now

    • @user4name
      @user4name 3 месяца назад

      @@LeoTechLab is realme buds air 5 pro same as redmi buds 5 pro?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      No, different brand...

    • @user4name
      @user4name 3 месяца назад

      @@LeoTechLab ok but which is better ? realme looks more expensive tho

  • @Ian3DP
    @Ian3DP 3 месяца назад

    Hi there I’m using proxmox on my server and can I create a VM and use debien in that VM and install Klipper in it?

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Although I currently don't use proxmox in my setup, I don't see why not. Proxmox is a type-1 hypervisor, so as long as you are able to configure the usb passthrough to the debian VM you want to create to make use of the 3d printer and webcam directly inside the VM, you should be ok👍

    • @Ian3DP
      @Ian3DP 3 месяца назад

      @@LeoTechLab Thanks I’ll try it later today

    • @Grabo3Dprinting
      @Grabo3Dprinting Месяц назад

      @@LeoTechLab I`m using Proxmox and passthrough the USB`s, i also use the sudo apt remove brltty ... but it`s still not showing up my printer. Any workarounds?

    • @LeoTechLab
      @LeoTechLab Месяц назад

      I don't use proxmox, so I cannot test this, but the "brltty" package only blocks the printer driver to load, it doesn't block the printer device itself to be recognized via USB. Does the printer show up in the connected devices, even without a loaded driver? Are you sure the usb passthrough is working properly?

    • @Grabo3Dprinting
      @Grabo3Dprinting Месяц назад

      @@LeoTechLab i got it working, was a thing with jumper and and a Button that needs to be poped out on the btt skr3 ez

  • @JakobLösch
    @JakobLösch 3 месяца назад

    Amazing, thanks!

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback! Hope it was useful!

  • @koooosta
    @koooosta 3 месяца назад

    Feels like the wind was picked up only on left earbud? But sounds good overall. Thanks

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      When using two earbuds, usually they seem to cancel one of the mics to reduce wind noise. Common on most earbuds.

  • @GMWTravels
    @GMWTravels 3 месяца назад

    Thanks Leo. Useful for me.

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you for the feedback. Glad it was useful!

  • @MSAHEL84
    @MSAHEL84 3 месяца назад

    Thank you Leo for the thorough review! 👏I ordered them based on it mainly. For the stereo mode 7:52 when you're using single earbud, you can override it in accessibility > hearing enhancement > mono mode > on.

    • @LeoTechLab
      @LeoTechLab 3 месяца назад

      Thank you so much for the feedback! Regarding the mono mode, I know I can do it at the operating system level, but that's not a good experience for me, given that I have to manually remember to keep switching between mono and stereo. I rather have the earbuds do the job on their own😋