Видео

@@franciscocastaneda6559 unfortunately they dont sell them anymore you can still get them from Aliance Hobby but they are spendy around 110 dollars.

@@johnrisinger7484 thanks for your comment 👍

@@josephsaucedo8691 thanks for the advice. Thats already pretty much what I do maybe Im a bit more conservative than your recommendations already, Ive had this lovely little compressor for 2 years now , Ive only actually filled directly to the gun a couple of times now , the other issue I have is Im an apartment dweller so I have to run it when the neighbor is gone , I just replaced my hose filter today. On another note Joseph, I just got the cheapo Beeman Chief 2 , but the front sight / moderator is so ugly , I want to take it off , what do you think ? Can I just knock it off with a piece of wood ? I measured the barrel its 15.2 mm I want to put an adapter on the barrel end so I can use my airstripper or a better moderator, most of the time I shoot without a moderator on anyway so noice levels dont really concern me much .

I'd yes it should be able to come off you might want to put a little bit of heat to it before you try to hit it off. A heat gun or blow dryer should work great . The wormer it is when you try to hit it off the easier it should be to remove most likely there adhesive holding it on. 💯🫡✌️

@josephsaucedo8691 thanks , I have a heat gun I hadnt considered there might be adhesive holding it in place 🤔

@@johnnybbgunner2136 Hey Johnny, 👋 Ive had this little unit for 2 years now , I baby the hell out of it tho , short pumping sessions and keep the temp low . The bottle Ive had for about 1.5 years . By the way Amazon has a 6 liter bottle right now on sale for 175 thats a steel .

Budget Gun , maybe the ugly integrated moderator/ sight will grow on me , My first adult airgun was a Gamo whisper Fusion , I liked it ok I guess but right off I found the cocking aid distasteful, I dont know if you ever saw the movie John Carter of Mars or not but it reminded me of thier Spat guns . Thanks for commenting.

@@johnnybbgunner2136 I dont believe its reversible but its ok Im left handed so it should be fairly usable for me , it I can knock the integrated moderator sight Off I will put a carbon barrel shroud on it plus a barrel adapter so I can use my airstripper or Buckrail-line moderator .

@@johnnybbgunner2136 221 bucks out the door . AGD . Next is a macavity or the Seneca Light Hunter tactical. No reviews out yet just one hog hunt video with the dragon claw 2 tactical .

that's nice

@BackyardDispatcher this riffle is $221 bucks out the door . Not bad for a decent shooting pcp , its supposed to make 30 footpounds but we will see , Im finally going to purchase a chrony , and quit using the phone app I have , Im currently using an app called Chrono Connect to get my numbers and I dont know what the margin of errors are with a free phone app .

@@GaigeRoe-f1n actully Ive already done this , I have a video out on it , but great minds think alike 😉

@@springpistonriflefeverlone9611 Thank you Chuck ,its a good riffle . It can kind of make you lazy because it really doesn't take any special technique to shoot just like a 10-22 but with no recoil , I find as I purchase and use guns with high foot pound readings I just want more this riffle will produce 45 foot pounds with a tune and over 35 out of the box . Your average 22lr is much more powerful in the 90 to 120 foot pound range having a 45 foot pound gun allows for shooting accuratly from 100 yards or more , Im sure I can do better than my average after refamilierizing myself with the break barrel and practicing more but now at 50 yards my groups are between 3 and 6 inches. Honestly speaking if Im shooting breakbarrel anything over 40 or 50 yards , I happy just keeping all pellets in my 4 inch diameter targets.

@@josephsaucedo8691 Hey Joseph, thanks for reaching out , I havnt dug into the Icon yet , I dont imagine it will be too hard to fix . The only issue I would have trading is all the logistics and shipping , but your offer does sound interesting. I think on the recall if you bought it outside of the Crosman store they will only give store credit , and the only thing I would be interested in from the Crosman store is the p-rod or the Maurader semiauto. I do have a Beeman Chief 2 plus side lever on the way seems like its very similar to the icon . I guess Im open minded to trade . My ultimate goal for 2025 RE : purchasing an airgun is the Senica Recluse tactical , the Dragon Claw is good too . Anyway thanks for saying hello , lets talk more about trading .

@jasonnealey8325 iv got a brand new still in box 22cal pcp muti shot regulated bottle airgun never has been opened the price new 320$ let's just say its cousin to you bull pump they pertty much related. Lol 💯😁👌

I go with the dragon claw myself there a good hunting airguns 💯👌

@josephsaucedo8691 Joseph, I can only shoot a bullpup that had the bolt or sidelever foward mounted. Im left handed an often have issues with bolt a magazine placment Ive been looking at the newest Avenger bullpup. They moved the side lever up so its more ergo and ambitious.

@jasonnealey8325 unfortunately it's isn't a avenger that I have. It's a umarex gauntlet that I have the magazine are the same as Crossman/Benjamin the gauntlet is basically a hot rod beeman qb 78-79 it's basically same design with performance mod internals done by umarex . I have a gauntlet that I built completely custom and the brand new one in the original box wich basically a extra wich id be will to trade. If your interested. I thought I'd offer it for trade because it never been opened and ruffly the same price as what you have in the icon 🫡💯😉✌️

@@ce-brasilshooter8295 thanks for your comment, I agree with you , I was going from personal experience and had a bad scope , my incorrect bias was reinforced when I was watching another airgun channel and when the shooter zoomed in his Poi shifted so much he wasnt on Target , I suspect he had same issue as myself where the scope was bad or the adjustment on the turet so loose the scope tube on the inside is moving around .

@@franciscocastaneda6559 you have s sharp eye its painted 🎨

@jasonnealey8325 just ordered mine from buck rail. The color looks good on yours because of the barrel. Thanks for the reply might have to mod mine a bit too

@@diegoalegrevega if you can take apart a 2240 its very simple . The conversion tube is called a safepack you can buy from Amazon or ebay look up froggy airguns for video instructions. I had no previous experience before building mine so far Ive built 2 different models . If you work ypur way thru my vids you can see the progression of my builds . This model I put a foreend for a diana chaser on it but had to dremel the barrel bed because the forend for diana has a big gap and the 2240 gap between air cylinder anf barrel is small . The new model I carved a wood forend and bent a piece of perforated stainless steel to. Make a Ventalated hand guard . The most sophisticated tool I used in the whole process was the dremel Safepack is super easy 👌

If looking to buy try typing 2240 safepack in ebay or Amazon. It cost around 80 dollars

@@jasonnealey8325 thank you!

@diegoalegrevega Diego , reach out anytime , my goal in creating this channel is to help other airgunners that might be going down the same path . You can tune these safepac builds by changing the springs there is one sping in the valve and one behind the hammer . You can change the way the gun shoots , if you have a strong hammer spring and a weak valve spring you will get mad power , but few shots , on my Power build it gets just 5 shots , on my econo build meaning economical with air use , I get 15 shots It takes 21 pump strokes to fill the air cylinder.

@@Seabass1206 the 1322 was 40 dollars more . This was from an auction off ebay , and I got it for 49 dollars free shipping , I already have a bunch of barrels from building up 2240 carbines , you should see this gun now , check put my vids and you will see one of the nicest 1322s out there . Thanks for commenting 🙂

Do you use artillery hold, and try many kinds of pellets?

@ all different pellets and slugs on my channel yes .

@ I am unfamiliar with what a artillery hold is

@ThomasJay723 artillery hold is where you hold the riffle lightly especially up front dont grip it let the riffle cycle thru its recoil , breakbarrel riffles have a double recoil it recoils backwards when you pull the trigger and forwards when the piston hits the end of its travel . You have to use a specifically designed scope for a breakbarrel or it will tear apart a regular scope even the most expensive scopes if not designed for double recoil will fail in a short time . Lastly follow thru is important because the riffle will exhibit both recoil cycles before the pellet exits the riffle . It just means hold tru on your target until it impacts your target .

@@swift10falcon Ibwas speaking with Chuck from Springpistonriffle fever , he say quality control is hit or miss , I only really care about functionality, mine is 98 percent good , there is a small blemish on my safety and there is a part of my breech block that was ground imperfectly . The most important thing to look for is maling sure your breech seal is in good shape , I have yet to take mine out and stretch out the shooting distance but inside my house at a mear 7 yards its hole in hole with Iron sights . The only thing that surprises me is how large the riffle is , I thought my Beeman was a big riffle till I put hands on this one .

@@jasonnealey8325 watched many of Chucks videos. I kinda know what I am getting into from much of what he says. Am a mechanic and like to tinker on things anyway. For $125 it’s hard to beat.i bought a umarex synergis elite recently. Got 40 rounds through it. It’s very accurate. Had the scope on target in 4-5 shots. Always intended on buying a springer. Will see how it goes. You can never have too much many and they are fun and cheap to shoot.

@@swift10falcon good to know , I bought some RWS super-h-points to shoot out of my beeman , they litterally shot 2 feet left of where my other pellets were falling on target Beenman bullpup hates them . They seem to work great in the Hatsan 95 .

@@jasonnealey8325 using RWS super dome 14.3 g . Have others but haven’t gotten around to it yet. .22 . So many choices. If Walmart didn’t have it we didn’t need it back as a kid. This industry has come a long way.

@@Stausider Wow that super generous, I haven't heard of this gun before but I will see if I can find any info , what would you need from me ?

@@franciscocastaneda6559 Hello Francisco , there is an English website called gmac that has them in stock periodically I bought one from ebay search for 2240 brass or crosman brass here again they kind of come and go you just have to keep checking in till one comes available. Another good place for 2240 upgrades is Alliance Hobby . That guy is awsum I asked in comments section of one of his videos if he could make hollow bolt probes as I couldn't find one he agreed and had them for sale 2 weeks later .

@@johnnybbgunner2136 I cleaned the barrel and now hoping the weather man is wrong , its supposed to just dump rain here tomorrow. I will do a vid but wont make any judgment until I get the barrel leaded in .

@@jasonnealey8325 Do not get the new rifle wet. We can wait until you break her in.🤠

@@johnnybbgunner2136 Im not tough enough to face Seattle rain with an airgun but yeah I will treat it like a nice piece of wood furniture. I had to clean it which means cocking it 1st. I shot it at my pellet trap in the house to de-cock it and it hits like a ton of bricks . Its wierd because on HatsanUSA website it says it shoots 700 or 750 like 24 fpe or so I cant remember exactly but on Airgun Depot it says it shoots 650 fps in 25 cal . Im still going to get more pcp guns love your new pistol. I just cant decide yet , Dragon Claw ??? Macavity Arms 30 ??? Blizts 25 cal ?? Im leaning towards the MA 30 cal. My Beeman Comador 1365 is by far my favorite riffle right now , I can go out with my buddies that shoot ruger 1022 and not feel too outgunned but the Macavity shoots 80 footpounds same as a 22lr out of my ruger Mark2 target pistol.

@@jasonnealey8325 They were probably using different style or weight of pellets at testing time. I would lean towards that M3 for sure. I have been looking at them myself.

@@Urbina930 this particular riffle is spring powered , I literally just got it today 10/18/24 so I haven't shot it yet , if the weather permits I will go shoot tomorrow and give some feedback, I know this riffle has a break in period where it might not shoot well umtil Ive put 100 or 150 shots thru it , the riffle is large and stock on this one is flawless . I guess its hit and miss on quality control. Looks like Ive gotten lucky the breech seal looks great the bluing is perfect, it comes with a duplex reticle 3x9 zoomable scope and rings . There is another Hatsan riffle on sale at Airgun Depot its just 89 dollars and shoots at a higher FPS its very plasticky but I was thinking of buying and diesleing slugs out of it , its already rated at 700 fps for 25 cal .

@@jasonnealey8325 cool man yeah let me know what u think, the rifle looks beautiful

@@KyleReese-vt8bo I will see if I can find them thanks for the tip

@@jasonnealey8325 Double barreled .50? Yep.

@@cameronmcclure3974 you are corrwct this is an old post and has some inaccurate info , I believe I had a bad scope that got messed up using it on a springer ,. What I will say is it seems like people are scared to rezero their scope when hitting off the bullseye , I hate it when someone shoots hits off target and says they are just going for groups . Different pellets will have different points of impact, once I settle in on a single brand of pellet , I will zero for that pellet .

@@josephsaucedo8691 joeseph , sorry for taking so long to get back to you , thank you for the kind offers , Im on a bit of a budget right now and from what Ive seen those FX chronys are very spendy , by the way where are you , I mean Im in Washington state and live in the city of Seattle , for me to go shooting I have to travel 40 miles one way I go out to some of the unregulated shooting pits out in Sultan Washington. Of course I have a few firearms as well and loved / do love to target shoot with them but the more I get into the pcp game the less I seem to shoot firearms , I get the same satisfaction from airguns especially my Beeman Bullpup, I just cant say enough how impressive it is for a 250 dollar gun . I have in mind buying the MA 30 cal Macavity Arms 30cal , 80 foot pounds, who needs a 10/22 after that ? Just joking Id never give up my Ruger 1022 or my Ruger mark2 long barrel . What do you think is the next best buy ? I want as much power as possible at budget prices . Dragonclaw 50 looks pretty sweet 😋

@jasonnealey8325 no problem the croney pro with blue tooth id sell for 80$ the fx I scored on ebay for 1/2 price it's sad to say the person who owned it passed away. The kid sold it to me for a awesome price. It the only reason why I never open the other one. 💯😉 nice I use to own a house in Seattle Washington. I was to young my grandfather had left it to me. It's a nice place reminds me of Alaska. I'm live in California. I also own the same ruger models. Lol. Your definitely on the right track. Macavity arm. M2 and id say the jts sky hawk bolt action really affordable and similar to the fx drs but a lot more affordable. I'd also say the umarex komplete. 190$ its hard to beat. The only thing is for it to stay affordable a 7075 aluminum 88g adapter to hpa tank fitting would need to be machined by your local machine shop. The ones available aren't strong enough. It's worth having one made. Even with the machine labor coast. The amount of features you can't beat for the price. For a Side lever regulated bottle gun 2 10 shot mag pic rail suppressed . The nitrogen to expensive in my opinion. But with a adapter and nonregulated hpa bottle . It's a hole different ball game for the price. Those would be my Pic. I also could build you a beast of a bottle marauder rifel. Around the same price as a Macavity give or take. Ps what did you end up doing with the icon just wondering. 💯👌👍✌️🫡😉

@@josephsaucedo8691 thanks Joseph, Im thinking the roumd ball ammo I was using might have slipped thru the transfer port and os resting inside the valve . I will let you know if I decide to turn it back in on the recall or try a repair , I hadnt thought of unscrewing the guage , great idea

@jasonnealey8325 no problem I wouldn't think the transfer port hole big enough for the round ball to be able enter the valve it self. If any thing I'd say it would get stuck in the transfer port . The round ball would have to brake apart for it to enter the valve port. Most of the time the valve port is smaller then the actual transfer port it self on factory Crossmans and the valve port a lot smaller than the caliber of the round ball . At least it should be. 🫡💯😉👍✌️

@@itstuulate4741 lol , I acctually can shoot 22cal round ball out of it 🤣. For reference all the little pump airguns we started shooting on were putting out about 11 foot pounds , read Daisy 880 or its crosman equivalent. This is shooting about 24 foot pounds so you can shoot accurately at a farther distance. Thanks for commenting 🙂

Hey Johnny, always nice to hear from you , I cant really say whether it increases accuracy or not , for the most part I just like the looks , they arnt cheap somewhere between 35 and 45 bucks it fits any 1/2 by 20 threading . Its fairly weighty not a light weight aluminum job .

@@eugenecundiff-nv2tn thanks for giving your opinion, I disagree, the muzzle break is quite heavy and gives a little weight to the end of the barrel . It does not work like a firearm muzzle break which reduces recoil and muzzle lift. The main purpose on an airgun is added weight and Appearance. The other cool thing about this particular muzzel break , otherwise known as a muzzle flip you can push the barrel all the way to the end of the Muzzel break making a 10 inch barrel look like a 7 inch barrel . Thanks for sharing your opinions 👍

@@Cody-sc7qo This is built from a 2240 pistol with a Safepack tube bought from Ebay or Amazon, there is no regulator in the build , you have to tune it by the spring balance with the hammer spring and valve spring , I have 2 of these builds one gets 5 shots and the other 13 shots the difference is mainly in the hammer spring strength, it has been very educational and fullfilling building my own PCP but it is way more expensive to build over buying a factory made gun , the other thing is the 2 riffles I built are completely unique, the stock on the riffle in the video was designed for a Dianna Bandit then modified with a dremel so it would fit a 2240 barrel spacing basically I cut out the barrel bed so it would fit the 2240 which has smaller spacing between the barrel and airtube . What you get by building your Own PCP is knowledge and Fun with a completely unique riffle / carbine . I dont know if Im completely done building my own or not just yet , I wouldnt mind doing a 25 cal and boring out the air transfer port , Im thinking if I can get 45 footpounds and get 2 or 3 shots that would be a nice project .

@@jasonnealey8325 yeah, that would be pretty awesome.

@@Cody-sc7qo check out the Cothran 457 pistol to see what a 2240 can actually do , the pistol grip frame and trigger all come from a 2240 an airtube is pretty much same nothing specail there but the breech barrel and valve are all custom. Cothran 457 pushes the limits of airgun power .