Видео

@@ThomasJay723 thanks brother, it was a lot of fun to shoot!

@@gboutdoors5198 I hear you, they def should have better mags. I hear there are some good aftermarket ones but they are def not cheap

@@Mootzshootz Yea I found one for 30 bucks! but I may just buy it I cant stand those factory mags

@@gboutdoors5198 that’s actually not a bad price, hopefully they work good!

@@Mootzshootz No not bad I would have been single loading if it went for 50 or something

@@gboutdoors5198 🤣🤣 I hear that!

@@stone99 I am still trying to find the springs in bulk so I can offer them to others on my website…as soon as I have them available I will post the link here. Thank you for your interest and yes I will be doing a chrono test today. Thanks for watching!

@@underthedrone2735 3600 psi or 250 bar

@@Mootzshootz Thank you. Did you use a tank or a compressor?

@@hax369 thanks brother! I hope you are enjoying your T9…she’s a bad mamma jamma!

@@Mootzshootz absolutely love it, brother!! Definitely a bad mama jamma indeed !!!!

@@hax369 I just texted you I got a question maybe you could help me out with

@@Mootzshootz of course bro. Anything you need

@@mikes11220 I agree there are many factors which will affect how each airgun shoots. One main factor is when the hammer hits the valve, the return spring allows it to open for a certain amount of time. Changing the tension of that spring will undoubtedly allow more (or less) air in which in turn amounts to more (or less) power. Again there are many factors that will affect how each airgun performs but the science or physics of knock open valves remains the same. Once you get into hammer-less valves and electronic components the outcomes change a little but the physics still remain about the same.

@@That1E_K1129 you really can’t beat the value of these guns…the hollow moderator was a bit of a let down but everything else made up for it! The side lever is extremely smooth and the magazines are easy to change out quickly. Regulated, Light weight and packs a punch…can’t really ask for more out of a sub $500 gun! 3 year limited warranty and it’s a no brainer!

@Mootzshootz is absolutely a no brainer, I've watched quite a few other reviews on it and the only weak point of it seems to be the bipod Pic rail section of the stock flexes quite a bit, but I don't care as I use a tripod or a bag rest to target shoot and in the field it's all off hand. I absolutely love the gun and should have one in .25 standard size barrel by the end of the month. I'm going to grab one before the price shoots up like AEA products did when they gained some traction.

where do you even get the spring from

@@Meloncholymadness it’s just an airsoft valve tool but some of them don’t fit right and need the edges of the tool ground down just a tad

@@Mootzshootz I ordered some Cirlclip pliers, I hope they work. Does it have to go back in tightly?

@@gordonkuusisto7068 instead you’re just making it more popular…thanks!

@@lesslethalfordummies I cranked it all the way today and was able to get 29.7 joule max and no blow off…that was with 3.2 gram balls but will be trying the aluminum 7.3 g as soon as they come in…hoping to get around 35-40 joules

@@Mootzshootz30 is about it on the factory barrel and spool valve. 35ish with a proper 8” barrel. Keep up the good work. 👍🏼

@@TangerineNguyen for some reason this model requires the bolt to be locked in the open position in order to fill. Also note that if your rifle showed up with no air at all it may need the seals re-set. This is achieved by using a large air tank like a SCBA bottle and giving a large blast of air that will pressurize the seals. Also note you may need to put a few drops of silicone oil into the fill probe before filling to lubricate the whole system.

@@enigmareach1129 and you watched it…so what’s that make you??

@@FightingAddiction540 95ft lbs of energy is plenty to take down just about anything weighing around 200lbs…that being said pcp airguns are not very reliable for home defense hence why they now have many different types of co2 power pepper ball guns that have quick pierce valves so you know it’s aired up when you need it. Also I wouldn’t rely on semi-auto pcp as they can be finicky with ammo and can jam easily. It has the power but not reliability of a firearm.

@@Mootzshootz I mean i guess if it didn’t work just grab a blade and turn into a Viking lol

@@FightingAddiction540 lol…well technically it’s not a firearm so there’s no law against adding a bayonet 😊

@@Mootzshootz which air rifle would you use for home defense ? If you absolutely had to. I was thinking about this one or the .50 cal megalodon. I do like the upgraded version of the revolver that has the press on the bottom though.

@@FightingAddiction540 there’s many airguns capable but the ones designed for home defense are usually less lethal and use co2…I haven’t had a chance to try out a megalodon yet but from what I see that would be a more reliable choice than something semi-auto.

@@theshirecrier-310 yea he should make a custom wire folding stock like the one on the uzi…but for now it’s up to the 3d printers and innovators!

@@artmercado1735 airfunners.com/product/t4e-pistol-valve-spring/

@@J.G.Wentworth69420 sorry I’m not gay…maybe try commenting on someone else’s video I’m sure you’ll eventually find what you’re looking for.

@@patrikorn7117 when shooting .8 gram projectiles these are the numbers with the spring mod…without the spring mod it is around 360 fps…the same would be true for the glock or any .43 cal T4e pistol.

@@midwesternwelds1197 with pepperballs it’s a lot more effective.

@@EnzoFighterM1467 they do a really nice job at replicating it

Fr the mag is too curved, looks nothing like a 5.45x39 mag

@@JeanPiper4 it is a replica of the 7.62 version…should be titled AK47

@@LowkeyAirgunner the outer plastic shell is replaceable and came with 12 shells, they also make different looking ones like flash bang style and round grenade style. I heard these were the loudest but I def need to test the others…The mechanism that pierces the Co2 is made of metal and I assume will get many uses, so far I’ve done 3. I still need to do one filled with baby powder to simulate pepper irritant dispersion.

@@tattered08 I have a brick and mortar store located in Branford CT and also have them available on my website, here’s the link airfunners.com/product/t4e-pistol-valve-spring/ If you are out of the USA or need other types of delivery please message the phone number at the top of the website for great service and alternative shipping methods. Thanks for your interest in our products ;)

airfunners.com/product/t4e-pistol-valve-spring/

@@Mootzshootz I just ordered mines Thanks!! Do you know if the Rubber ball spring that comes with it , helps the power or anything?

@@donn5601 the rubber ball spring is only to help feed heavier ammo, it has no power increase at all.

@@Mootzshootz ok Thanks!! What is the exact name of the tool you used to remove the valve piece. I tried pliers they’re not working. I got my spring just can’t remove the valve piece 🤦🏽‍♂️

couldnt figure, but i am pretty sure that guy that said you cannot insert the stock mags from the left also was using a different airgun s mag too. i sure wish i had sure confirmation of that dual side mag thingy . cause without it, i will not buy another one of these.

@@AIRGUNZ_MILITIAwhy ?

@@FightingAddiction540 well simple, cannot be regulated, goes from 100fpe down to69fpe in a single mag, bottom tank is not held in pla ce by the pressure, even at 4500psi you can grab thebottom tank and it will unscrew releasing all the pressure and giving you a headache fishing the o-ring out the tank to put back on its probe. the thing just barely fits the edgun west exploding slugs and i think it might misfire and blow one up in the mag it is so tight. need i say more? it is a bintac product and bintac hates me so much for telling the truth about his stuff that he will not even talk with me to try and fix commmunications anymore. and my issues were always valid. had the T9 in my hands, it was leaking because it was not packaged correctly for shipping. box cam with3 half dollar sized holes in it and the end ripped open. and the airpistol was leaking and no one seemed to want to deal with a customer the day before RMAC. and bintac told me himself that he was not concerned with another aea dealers customer even though i bought things frim him also. and i think he intentionally made things the way they were to ruin relations with my aea dealer. s bintac himself sucks rotten oranges. and the 9mm s45 is a more powerful platform even though it is prone to destroy itself. so i am just gonna buy a elite challenger.357 and remove everything , put a 170cc plenum on it with an end cap like a tank and use my m14x1"die to put threads all down the barrel and then facksaw it down to the length of th e smaller tank and bolt a ar pistol grip onto it for more power and a regulater and 2mm tank. and use the extra parts like the 500cc 52mm tank on another airgun use the bullpup stock on something else, and have an actual handgun sized air pistol. snce bintac products just are not doing it for me and the person behind them does not give a rats tail about his customers. s with that said, bintac can have this comment removed by talking with me and resolving our issues, or he can deal with people knowing the truth. he cares about money, not our community. that is "why"

If you have the same one all you have to do is disconnect the female plug with two wrenches and then screw in the Hatsan fill probe…honestly the better thing to do is get the quick disconnect foster fitting fill probe. They are like $20 and then you don’t have to worry about changing anything. Hope this helps. Happy airfunning!

@@Mootzshootz thanks a lot, this means a lot to me!

@@MetalFusionForge you’re welcome, I’m always happy to help out a fellow airgunner ;)

I don’t think there’s any extra tanks available yet, but I’m sure there will be soon and when they are available I will have them for sale