Видео

New gear now, and thanks for your input

Diameter 5.9mm length 1.2mm, shaft 0.8mm

No problem

The X6DC doesn't have telemetry, the X10 does, just connect it to the battery and the Bat +/- on the receiver

@@hofsplace stai dicendo che con la ricevente x6dc non posso avere la funzione monitoraggio tensione delle lipo ? o questa funzione e supportata dalla x6dc e basta che collego la lipo su un ingresso ?

The X6DC doesn't have to option for battery input and telemetry.

@@hofsplace ok ,capito grazie , quindi che ricevente dovrei prendere ?

You need a light module to switch the lights. Otherwise they are always on when you plug them into the +/- have a look at his as example: s.click.aliexpress.com/e/_EJT2SsM

@@hofsplace ho una ricevente x6dc che dovrebbe già avere il modulo luce incorporato !!!

@@hofsplace sul sito viene detto che permette di fare funzionare le luci ma non riesco a capire la procedura !!!

If I remember correctly, you have to turn the steering wheel 3 times and 4 times to the right or left quickly, then you will turn on the lights

@@hofsplace ti ricordo che come radio ho la ddi 350 !! la procedura e la stessa ?

Ik heb hem ondertussen niet meer, maar zover ik mij kan herinneren, nee. Alles zat gewoon stevig

@hofsplace oke bedankt voor je reactie .ik heb hem pas een week of 2 maar het valt me op dat de wielen veel speling hebben

Op de achteras of de armen?

@@hofsplace sorry zie nu de reactie pas ..er zit vrij veel speling op 'drijfstang' aandrijfassen de achterwielen

@@hofsplace ik heb om mijn youtube kanaal een foto geplaatst ..als dit asje heeft ruime speling ook nadat de wielen erop zijn geplaatst en aangedraaid zijn

Indeed.

Just try to contact them. I have good experience with their aftersales

@@hofsplaceyou didn’t read his full comment huh?

​@@jacobm9697 I did, just recommend to try again

I didn't test the full range, but I had no problems at all. For filming, it's a Runcam Tumb on the car. FPV where I played with before: s.click.aliexpress.com/e/_EJy80Te

It should have the same dimensions. If i remember correctly, it is the 17g one.

Thanks, indeed, it's... perhaps too fast 😉

Good question. I tested the RGT once, that worked. But of the FTX or Cross RC, not sure. You have to try it

They normally can be turned on with a button on the remote

Not that I'm aware of

That's an awesome chopper indeed

Klopt 😉

Mine came with it already. A lot of parts can be found on AliExpress

@@hofsplace thanks mate, been looking on there but it’s a bit of a minefield as to which ones will fit. Chassis is in the post so I’ll have another look when it’s here

There is another clone out there, not sure, but often they are made in the same factory. I dont have it anymore, so I can't check: s.click.aliexpress.com/e/_ExaKD6g

I got them here: s.click.aliexpress.com/e/_EJc0Kgo

Yes, you have 10 individual cars you can set, look inside the menu, transmitter

@@hofsplace received the transmitter yesterday and its confirmed. I can even give a name to each rc car paired. Amazing!

Great

3.17mm

No

No

@hofsplace thank you. Just convenience ?

That's not correct. This has different electronics.

Is the Hobbywing sensored?

Try to double click the bind button to reverse the light

Yes. Up to 10. Check the remote menu

No

Indeed

I will check it out

ANT should be ANT and they should bind. I didn't test it myself. Otherwise, send them a email

2s lipo: s.click.aliexpress.com/e/_EJiTxti

Thanks 🤘🏻

In between the wheel, under the bed

@hofsplace thank you

First did one color. Than a mist from around 40cm away to make the fabric pattern. All with Tamiya Paint

Mmm, might have to try that! Thanks for the reply 👍🙂

🤘🏻

I bought it here: s.click.aliexpress.com/e/_EGCuNC8

No gain adjustment, only end-points, reverse and dual rate

Does the battery charge?

@hofsplace yeah, it seems. It flashes the red, blue and Green light and i already charged it almost a Day. But when I put it inside the car and push the button on the front, it actually doesnt do nothing. Do I must buy another battery or its something inside the car?

Probably the battery is to low in voltage so the protection kicks in. Try to charge the lipo Inside the box separately so it has some charge. Tha. Try again. Or contact the store.

@@hofsplace lipo? The Green battery inside? Or I should buy a New battery?

Yes, the green inside. If you have the ability to charge it separately, that probably solves it. Of you can't, yes, buy a new one

It definitely will, haha, have fun 🤘🏻

Inderdaad, hoe raad je het 😉

​@@hofsplaceiets met bepaalde klanken🤣🤣. Leuke filmpjes btw! Heb hier na dik 10 jaar RC hobby weer opgepakt gezien me zoontje van nu 11 de tamiya tt01E heeft, en ik zelf maar de tt02 gekocht heb. Alleen een hoop rc spul verkocht dus nu kunnen we weer alles gaan aanschaffen 😂😂

Eens verslaafd, altijd verslaafd, haha. Veel plezier!

​@@hofsplace haha ja precies. Gaat helemaal goed komen 😁

Send me a email: I'll try to make some pics. hofsplace@gmail.com

On a 3 link. A 4 link forces the axle to travel up and down centered, a panhard forces the axle to travel through an arc to the side as it moves through it's travel. You can only have one or another. If you need extra support on a 4 link, you need a Watt's linkage.

That's correct

Good choice!

Clean it maybe? Sometimes things get stuck in it

You have to remove the hard black ones first