![Blake's Corner](/img/default-banner.jpg)
- Видео 1
- Просмотров 188 414
Blake's Corner
США
Добавлен 11 сен 2013
Programming and hardware projects.
Remove wires from Molex connector
Simple video showing how to use a paperclip to remove the wires from a Molex connector. All you need to do is find a small, sturdy, "rod" that you can depress two tabs that keep each wire from coming out of the connector. I had success with an oversized paper clip, but this isn't the ideal method if you want to re-insert the wires back into the connector later. For this, I recommend using a power supply modding tool (www.amazon.com/gp/product/B001KQDS6G/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001KQDS6G&linkCode=as2&tag=blakev-20&linkId=KUZWAF7RDI3IALLC) we can help you not destroy the tips of the wires in the process of removal.
Thanks! Hope it helped....
Thanks! Hope it helped....
Просмотров: 188 429
Been awhile since i've done this. Thank you sir!! Your simple video, saved me a lot of time.
Is there a way to uncrimp the wire? How do I remove the steel pins of the wire that are crimped without damaging it?
Now how do you take the pin off the wire????
Not at any point is the camera in focus
I didn't see the high res pic you said you would show. I couldn't tell how or where you poke to get them out
You did not link to the tool or show a high resolution photo in the description, but this was still helpful thanks. Funny it is eight years old now.
jeri
POV:- Youre here from JerryRigEverything's subscriptions 🤣
Thanks
Who’s here from JerryRigEverything’s subscriptions
dude, u saved me big time today... got my rpm gauge on my 03 mitsubishi truck to work again properly after 10 years... <3
worst focussing of a camera since 2001
Thank you it worked for me!
I wish you had said to be more careful from the beginning.
Always read the instructions (watch the video) completely through before doing anything. RichE
Excellent. Thanks a lot. Didnt know how these things worked
Thanks!
vraiment épais
TNX for the tip from Australia
to help general movement of the Rubber seal and the wires you can use a little penetrating oil like WD-40 which will lubricate things and also it displaces water as well
Maybe not wd but electrical connection spray and not the "normal" wd
Even though this may be a bit of a hack job, it saved me a lot of stress and money from trying to aquire the removal tool. I removed that stupid Berg/Mini-Molex connector from my PSU doing this.
The correct tool is a thin blade, causes less damage to the locking tang.
AAArgh! buy the tool. high resistance equals fire. Trust me I've seen hack jobs that have almost burned down buildings and destroyed 100K + machines. Ten bucks and a little practice is a small price to pay. Your customers wont thank you because they'll never know.
Yup, if this is your business, buy the tool. If you're just a person at home who needs a couple removed, this works fine. Noting that this is NOT intended to be for re-installation. And these are not high voltage,, typically 12VDC, nor high current connectors. RichE
Really old comment, I know, but if someone stumbles upon this I want to spread the info: You do NOT need a special tool! You can take the ink tube from a non-clicker ballpoint pen and use that!
Yes, that makes it easier for the male pins. For the female inserts you're back to a specialized tool or some such...
thanks
Cheers dude, been pulling my hair out trying to get this done. Just have to look closer ;-)
Boy are you going to be surprised :)
Atta boy, short, sweet, easy to follow. Keep the awesome videos coming.
is this ye child?
Old Jerry, came from your subs
didn't expect you here
I guess you're here then
Yeah