Видео

Thanks!! Our MarCELL PRO has been awesome! Def worth getting the best when using it for this!

I’m going to replace the fridge in my 2020 Winnebago Voyage. It is the same as the one you replaced in your Grand Design. I would like to know how many mounting bolts and the location of them. Thank you.

Thanks for taking the Time to make this video. Appreciated. Might have to do this myself soon

Thanks buddy well done...

Im interested to know if you had ANY cooling problems in the freezer or fridge part from not having any air circulation behind the fridge. There have been many forums on this

You should have added a rear wall vent to the outside. Getting ready to do that in my 315

trying to figure this out myself with out major money or modifications. will use propane a only source, class b so no truck bed

Nice unit, It be nice if the 1152wh battery capacity was equal to or higher than the 1800w output.

I have no power going to that box so I have no power going to that box whatsoever. That’s why I’m trying to figure out any suggestions opinions because there’s no power to it so when I push those buttons or not, there’s no power there’s a ground in the power, I took a meter to it and the light no power going to that box, please help

Expresso machine is your test? What a yuppie!

Thank you for making this! I am hoping to do the same to my topper. I'm also curious where you got the Velcro hanging organizer that you had taken off the side at the end?

I am getting 1 green followed by 9 red. What is the fix?

Nice set-up, great review. Wish I could do what you did to my 2021 20BH Geopro, but the black tank is too close to the back. I really hate not having a generator, especially camping in the south.

What size cap to cap the propane line?

This guy killed me 😂 “M-idea “

We just installed the exact same fridge! Tomorrow is travel day for us and we're not sure how to secure the fridge itself and the doors! What have you guys done to secure it??

Do you also have a Wi-Fi hotspot to be able to see your dog??

Great review. I just picked one up at Walmart for 25 dollars

You recommended the e3 spark plugs, but I don't know which one to buy--the manual says F7TC (Torch) or equivalent. When I look up e3, I'm seeing e3.36 for Powersports (rather than automotive). Does that sound like the right one? Thanks! I also found one called "small engine, lawn and garden equipment")

This is so helpful, thank you!

I stopped using mine because….These sensors on RUBBER valve stems cause premature valve stem failure. Do not use unless you have metal valve stems. the weight of the sensor causes the rubber valve stem to wobble and Causes the rubber to fail which will”leave you on the side of the road

One of my ignitor isn't lighting my back 2 light just not my front

Why in the first clip is the bypass valve facing 9oclock and the second clip after the pump is working is it facing 6?

We just exchanged our refrigerator, Thanks for your video

Great video!

I do not know if you were asked this, but can you run the generator right there in the cage?

thats not too bad. I have to send my couch in for upholstery

This slide is a piece of junk.left us in colorado broke down.

That was excellent Make an office out of that I actually pulled mine out and that is a large dog bed and play area for the dog.

We had 8 red blinks on motor 2 and the problem was the motor was fried. But that is not what #8 says. Figured this out by applying power directly to the motor connector which completey bypasses the controller. The motor can be disengaged by loosening a set screw at the top of the slide which goes into the motor. You then have to pry the motor up off the top of the spindle it's sitting on. Once you do that the slide can be pushed in by hand while operating the remaining motor with the button inside.

Enjoyed video

Hi there. Can you please tell model # on you residential refrigerator, after seen what you have done, i need to go buy one an get it done, I would appreciate if you can share model and make of the refrigerator thanks 😊

We have a 2018 Imagine 2150rb and trying to find our controller was crazy. It was behind a short wall under the bathroom sink! We had to reset it 3 times before the slide out worked correctly!

This video is a "keeper" !! Great job on the production!! Merry Christmas!!

why not just hard mount the unit into the cage? add in to the rv another 110ac plug at the rear. and a very short connector cord. you are not using a Honda eu 3000, if you were to use one you can add to it a extended fill tank remote start. then using a 4 inch pvc you can make a stack to vent the exhaust above your rv.

Great video. We are also in silver springs.

I would like to connect it using a smartplug so I can programm the smartplug for the cheaper hours. Does this device have an autostart-when-power-comes-on-again setting?

Mine stop going in evenly till I lubed it now perfect

Do you remove the generator from the carrier to use. I have the 2000 watt units. If did not have the cover on unit. Thanks

I always use our rv bathroom at gas stations so I like these steps for those situations, our fixed Lippert steps take up a lot of room like the Mor Rydes

Seems like you forgot to change it to electric.... You were using gasXD

Thanks for the video.

I have a Predator 3500 generator and am doing the same thing for my camper. It is a cargo trailer conversion with electric installed so this way I can run the generator at night if I'm staying at a roadside rest or Walmart for the night, or anytime for that matter. I'm cutting a piece of plywood for the base, and covering it with high density foam to cut down vibration. Nice job!

Love your set up. I just got a 5000 and a cargo rack. Thanks for the video.

Merci

It did work. i had to reset ones, then try it, No , Then reset again, Then IT WORKED..Thank you

We have the same issue with our refirg. we have identical rv as you & your wife. These refrig are not made for Florida or Texas which is where we are from. when they sell an rv they should tell you hey this type of refrig is not made for 1000 deg heat. (lol). I told my wife when we pull it out she can take a sledge hammer to the thing.(lol). I would have like to see how you leveled the new refrig., but we can figure that out.

How did you get the fridge inside your rig?

We used Reynolds Aluminum Foil Wrap for the larger spaces and it wraps well around the wires. Easily removable and the mice hate it. Thanks so much for the tips on the entry points. These critters are driving me nuts!!!

Just put down thin sheet. Steel on the bottom like you made for the top lid. Lighter weight also