Видео

Bad video

2014 chevy sonic ima check the hose again

Not helpful

ruclips.net/video/rHDmqAq8VKE/видео.htmlsi=kZIk-yRz0JViWlgl

Gayest music to have ever surfaced in the history of the human race

I have a question. It’s on a 2010 Equinox with a 3.0 V6 GDI. After replacing the timing chains, the camshaft sensors and solenoids, the sprockets and phasers, the chain tensioners, the coils and spark plugs, etc….and pulling the heads to check for bent valves, doing a valve job (including cleaning all the carbon from the intakes and valve seats and replacing the valve stem seals…and clearing all the codes, I get an intermittent P0304 DTC. After this, I replaced all three injectors on cylinder head bank 2 (2,4,6), all four oxygen sensors and both MAP sensors, intake and air cleaner. Still got the P0304 DTC. Took it to a GM dealer who charged me for a diagnostic and told me it was a bad ECM. Had them replace the ECM and program the new computer…still the same code. They said there was fuel in the oil…that the new #4 injector was leaking. I took the original #4 injector over to a shop with an injector flow bench and watched them test the injector. Worked fine and no leakage under high pressure. After running up a $1,200 bill ($680 for the ECM, $200 diagnostic and $325 for the ECM programming), and 2 weeks at the dealership, I took my car home. As I said, this is an intermittent condition, only misfiring at idle…and only occasionally, not all the time. The only thing I haven’t replaced is the HPFP…but wouldn’t this malfunction on more than just the #4 cylinder? Could it be a bad ground in the harness between the ECM and the #4 coil? The “StabiliTrak Service Req’d” and traction control lights come on, too. Any ideas?

Brah! Take this shit of from here 🤦‍♂️

I didn't learn one thing about that subject that I was looking for. But I did get dizzy headed,I guess that was the purpose of the video.

I have the same problem on my 2015 kia ceed, i have the abs light and traction light on, i get the c1209 code , and also when i drive 40mph or higher i get a loud sound from the wheel but dont know which one?

Hi mate are you in the uk?

Change the title of the video 🤦🏻‍♂️

This is the dealer way of doing it 😅 no need to take off the whole dash

What is your question- da daba San o??? Wtf=where the fuck you from?

I have same problem with my Honda odyssey I change that part but doesn’t look the same with the one you showed the video my 2011 I don’t know what years yours

Think this would fix my 2005 tdi gear 2 incorrect gear ratio? Sometimes it dont shift from 2nd to 3rd. When coming ti a stop it will down gear hard into 1st. Thanks

Would this still be the culprit if when I press mode it changes to the other modes but the center still doesn’t have air. And it seems like every mode still has it coming out at the windshield.

Step-by-step Brother you miss a lot of stuff in the process make a video of step-by-step

Thank you you helped me alot

Making a video of it when you're not having a seizure would be helpful, I'll give you an E for effort tho.

This video is so shakey you can't see anything. Why upload this. Much better videos available.

Is it 2.5?

Great video of your airbag, bro.

Ez 💰

Commentor comments for the comment consumers I parked today and walked around the front, and mine had already made a puddle and was still dripling! (Makes sense now what and where amd with what is coated in fluid underneath) Was leaking on the pass side but was a slow drip. Kinda coolant color but had fluid qualities Coolant reservoir was empty. Just a lil showing at the bottom Was so confused Today it leaked faster but on the driver side Now the c9ndenser is soaked What? What's these metal lines goto Looks like the breaks Break fluid a lil low. Uh what. They cool the break fluid? (Lines must be side by side and I lost track(interneted that it was transmission cooler lines(had no idea it was in the ac condenser(distant memory had heard of transmission coolant lines))) Had filled the coolant but oops I over filled. Oh well it's got overflow right? Now I gotta internet if running it fully topped in the coolant resivour is bad. Thing is a mess. Now it's littered with oily muck. Ie unless it leaves a puddle or sprays like a hose you aint gonna see it. Getting it jacked up and wheels off is 2 more stories (rattle clunks and wobble at 45mph the rim was so hot it burnt my thumb) Finna DIY it Once dumped wiper juice in the coolant Of my other vehicle Lold about it coz I didn't start it realizing wtf injust did Was ez to remove and drain Comment at you later I'm finna go get on the game

What a waste of my time. Click bait..

Shut up. Stupid video. You don’t know it , just say that and don’t waste peoples time.

Was the ac giving you trouble ?

Great video!!!!!! Thanks!!!!!!

This is the worst video I’ve ever watched on RUclips. Thank you.

96-611915

What is ambient temperature? Your pressure readings are fine if ambient temp is high. Was system cooling? Did you replace the compressor just because it's noisy?

so you did not fix the problem ?

Could you give me the part number for the rear wheels?

How did you measure the freon?

What gauge dude tempature?

or the dashlight lights could be going out 😮😮

I have one in the shop right now where it does not blow out of the center vents only the outer vents. I believe the code is b2139 no mode selection either

How can some STATE YOU DO NOT need to REMOVE DASH TO REPLACE THE EVAPORATOR ? OTHERS SAY YOU MUST TAKE DASH ETC OUT TO REMOVE EVAPORATOR . SO can you remove it or not ? Crazy

Not a good help

Thank you for the video! Would the procedure be the same for the Infiniti Q50? I don't want to have to remove the entire dash. Thank you!

Searched multiple videos for 2008 and couldn’t find any, but this one looks like what’s behind our glovebox. Thank you, really helped me!

She loosey goosey bud. You might need a new one of them.

Couldn’t hear you to well but did you replace the whole oil cooler or just the o rings from the coolant pipes?

Thanks bro

Do you think this is possible to do while the vehicle is on the ground supported by jack stands

What's the engine?

Don’t watch. Waste of time.

I needed to see this. Thought i was missing something. Thank you 🙏🏽

I went to that 1800radiator site but it wants a login. Is that only for businesses ? I can’t find that part number on any other site

Hi, I checked, and I don't see anything wrong with it. By the way, i replaced the coil with a spark plug, and stills I have misfired.