Видео

Yea I thought about that as well

Yea I never really understood the point of muzzle brakes on a 5.56 I put it on this rifle just for this video.

Factory colt please check out my other colt videos if ur interested in what happened w this colt.

Always

I actually have not had a malfunction since it was cleaned. 0 malfunctions since I put the scope on. Yes I have acquired a M14 and I just ordered a AR10 so the AR10 will be a go to if I need more firepower

@ it’s too bad that pictures can’t be shared in RUclips comments. I don’t know about other manufacturers specifically or when the change was made. My CETME was made early 2003 from Centuries records and I don’t know if they built it in house or if it was a contract gun. The hole in the top of the receiver in front of the rear sight provided a nice option for anti walk. At the end of the day putting on an optic is more to see how it groups then take it off. For me the appeal is the historical value in the history of post WW2 weapons development so I like the look as issues but that’s the great thing about collecting we can do what we want for our own reasons, just don’t mall ninja your AR 😂

Colt uses grey buffer tubes. My AR15A4 has one, was thinking of just taking the tube off and painting the end w that paint I had in the video.

​@@THEPAGUNGUY I ended up finding the tube at specialized armament and a grey A1 Slip Ring from MilCo. I don't have any paint but I guess that would work too. I'm collecting A1 rifles and want them to at least look like the originals.

No problem scratch that I know who you are I use to watch your channel a good bit but I don’t see anything from you anymore. I just went and looked and I see u still make content…. If u have not please check out my other videos on this gun I think I have 3 and then I have a 500 round update that’s a RUclips short.

@@THEPAGUNGUY thank you, I did see the other videos on this rifle, I just got three of them together in one shipment, I have not even cleaned them yet so the videos will not be uploaded for a few weeks

@@michaeljohns1019I’ll be interested to see what urs look like they assured me they were gonna do better w these. I tell you what I really like mine after I got it all cleaned up and worked on the finish I don’t shoot it a ton but it’s been really reliable and it shoots good about 1.5 inch groups (5 shot) at 100 yards w the 5x optic I put on

Yes type D…feel free to call them and tell them what you what and they can get u a nice set together.

@ You ever think about getting a Vietnam Car15 from H&R? It was a toss up between the M16 and Car for my dad. In Vietnam he liberated an AK-47 and later traded it to a LOH scout pilot for his Car15. Some days later some officers liberated the Car15 from my dad and wanted to know the name of pilot he traded with. My dad made some excuse about the pilot having his tinted visor down and not recognizing him. The officers took the Car and pissed off. He probably got played by the pilot. My dad was 20 years old. Anyway he was always bummed about the situation as he didn’t get to take the cool Car on any patrols. As far as the AK goes he got some cool pic with it. I’m not sure what the equivalent PSA H&R Car15 would be. At the time there was only one model of Colt Car15 in service?

@@OhItsThat did u order the M16? Yes all the damn time I think about buying one lol there just so damn expensive and like I said in this video there’s details that are wrong so if u are like me and will wind of fixing them. The cost of the rifle you could build a base BCM for the cost there what 1200 I probably will brake down and buy a carbine I’ve been thinking about it for some time. And I would like to do a video on just the H&R line what they get right what they don’t. Kinda along the lines of this video but on a bigger scale. But I think I should have a bigger sample size I only have 2 H&R rifles at this point. Just wish they were 900 bucks not sure why they need to be over 1100 for a non blem

@@OhItsThat oh yea and about the carbine no I think there was a few there was never a adopted carbine until 1994 with the adoption of the M4 so anything b4 1994 was commercial of the shelf that the air force and special forces bought from colt. No TDP or anything. I think there was a XM177 a XM177E2 I’m not sure if the Car 15 was a different carbine or the same thing just another name. I’m more into the standard infantry rifles like the colt 601, XM16e1, M16A1

@ I haven’t ordered the rifle yet as I wouldn’t be able to pick it up from my FFL right away.

Glad you like them! Thanks for your support!

Aero is great my brother in law has like 5 Aero’s he build and he swears by them.

I wouldn’t necessarily ding them on the furniture most AR MFGs use Mil-Spec Furniture on there ARs from factory including Colt. I agree on the 4140 barrel however if u check out the meltdown videos the barrels actually do very well. As for the non pinned gas block I 100% agree however not sure if u know this but no one really pins there low profile gas blocks. Colt,DD,Geissele are the only ones I can think of the top of my head. You can get a PSA premium with the Geissele pinned gas block. But just about everyone else uses set screws including BCM (not sure about the super high end guys) I’m really not sure why pinned GBs are not more common it doesn’t make sense

Who pins there low profile gas block besides Colt,DD,Geissele?

@THEPAGUNGUY the fact that they don't for a self defense rifle, unless they have a good solution like Knights, tells me to go elsewhere. Range rifle doesn't matter.

@@markreynolds6715BCM does not pin there gas blocks either so I geuss there trash?

@THEPAGUNGUY I'm not saying they're trash, it's just a failure point if your life is on the line. I have read of one example of their gas block coming loose. I've worked my life as a carpenter. I've learned to take the extra time to do something right. To me they're trying to save a few dollars. There's a reason colt, fn, HK, geisselle, caracal, and others pin the gas block. To bombroof it. Blackout defense doesn't but they do something innovative that's just as good. Even PSA on their geisselle furniture guns are pinned. I've seen too many things fail in mechanical systems when they don't go up to spec. Even ak's are pinned. CMMG on their Dissent is pinned. Pretty sure LMT is too. You got me laughing. Yes I'm anal about this.

Thanks for the information

Yea I just got my strikefire didn’t take to long I just didn’t want to run it on this gun.

How long does it take to ship, just bought one for Black Friday and got the rebate

@ mine took maybe 7-10 days after I entered in my rebate on S&W website.

@@jasonlopez9302yea I don’t remember exactly but it wasn’t long I did mine online and it was about 2 weeks or so

First off it would have definitely been a M16A1 the XM16E1 was phased out in 1968. No the black finish wasn’t done till the mid-late 70s (not sure exactly when) I think even some of the M16A2s in the eairly 80s were grey. What he is saying makes sense the trapdoor on the M16A1 didn’t really come into play till like 1972. The “quality GI stock” means it comes with an actual GI stock. The M16A2s that PSA sells say “quality GI handguard” they come with a GI handguard. Don’t get him a XM16E1 there’s a difference in the lower not sure if you seen it or not. Check out my channel I have other videos on the M16A1 and I have a Video on a company called US Collectors Ordnance they sell Surplus M16A1 furniture I would recommend buying a set from him to replace on the H&R I didn’t really like the PSA stocks sets they seemed kinda cheap and he will probably be able to tell that it doesn’t feel right. I’ll put links in let me know if you need anymore help if you would like a video on something let me know. Tell him I said thanks for his service! ruclips.net/video/lDfmIcSN-Yc/видео.htmlsi=yh9ITCM7yRt7GV3R ruclips.net/video/yP-kE9waKe8/видео.htmlsi=jVmHOfRURpnJIIJz

@@THEPAGUNGUYThanks for the reply. So what rifle would be the closest? Would it be the M16A1 in gray shown with a 30rd mag?

@@OhItsThatI shouldn’t do this but I’m gonna post a link hopefully you see it and it doesn’t get reported. This is what I would get and I would get a surplus stock set for it. palmettostatearmory.com/harrington-richardson-retro-m16a1-style-20-5-56-rifle-gray.html

@@THEPAGUNGUY Thanks man. Thats the one I thought it was.

I’ve seen a few but that’s cause people don’t tighten them to spec